]
Sent: Tuesday, May 22, 2018 3:07 PM
To: Teemu Veijalainen
Cc: usrp-users@lists.ettus.com
Subject: Re: [USRP-users] B210 Frequency Offset
Hello Teemu,
Have you set the B200 to use the GPSDO as the time and frequency source? Not
doing so could be the cause of the frequency offset.
http
On 05/22/2018 08:42 AM, Teemu Veijalainen via USRP-users wrote:
Hi,
And thx for the reply.
The manual (http://files.ettus.com/manual/page_gpsdo_b2x0.html) states
that the GPSDO is detected automatically so I think I don’t have to
configure it:
* /“By default, if a GPSDO is detected at st
acy? Or could there be still some other reason?
Br, Teemu
From: Derek Kozel [mailto:derek.ko...@ettus.com]
Sent: Tuesday, May 22, 2018 3:07 PM
To: Teemu Veijalainen
Cc: usrp-users@lists.ettus.com
Subject: Re: [USRP-users] B210 Frequency Offset
Hello Teemu,
Have you set the B200 to use the GPSDO
Hello Teemu,
Have you set the B200 to use the GPSDO as the time and frequency source?
Not doing so could be the cause of the frequency offset.
http://files.ettus.com/manual/page_sync.html
Regards,
Derek
On Tue, May 22, 2018 at 12:41 PM, Teemu Veijalainen via USRP-users <
usrp-users@lists.ettus.c
Hi,
I've 2x USRP B210 with board mounted GPSDO (TCXO). I'm controlling the USRP's
with MATLAB and configured the other to send CW at 3.75GHz and other to receive
with the same frequency. The radios are connected with 50cm SMA cable and 30 dB
attenuator.
I know there should be some frequency of
