I retract my suggestion, now that I have seen the connector.
> On Aug 8, 2023, at 2:29 PM, Royce Connerley via USRP-users
> wrote:
>
> The E310 uses a bayonet style locking barrel connector. I have used Kycon
> KLDX-PA-0202-A-LT on the E310. DigiKey has them in stock.
>
The E310 uses a bayonet style locking barrel connector. I have used Kycon
KLDX-PA-0202-A-LT on the E310. DigiKey has them in stock.
> On Aug 8, 2023, at 12:22 PM, Marcus D. Leech wrote:
>
> On 08/08/2023 13:16, shapkiqua...@gmail.com wrote:
>>
>> Hello Marcus,
>>
>> Thank you for a response
Are there more than one FIFOs in the flowgraph? If so, you may need to set the
FIFO Select on each FIFO to select which FIFO block to use.
Royce
> On Aug 9, 2019, at 2:36 PM, d.des via USRP-users
> wrote:
>
> The latest version of AN-315
> https://kb.ettus.com/Software_Development_on_the_E
e to handle channelizing
> it in software.
>
> Nick
>
> On Thu, Aug 8, 2019 at 11:19 AM Royce Connerley via USRP-users
> mailto:usrp-users@lists.ettus.com>> wrote:
> EJ:
>
> I’m currently wanting to receive a total of four channels that are 12.5 kHz
> wide. The ch
ga solution for channel downselection in a branch that
>> Phil put together. The ball is in my court to turn the crank and merge to
>> master with supporting software, but I haven't gotten much of a chance
>> recently.
>>
>> If you're interested in testi
eed a sample bitstream or if you can
> build one yourself.
>
> EJ
>
> On Wed, Jul 24, 2019, 4:39 PM Royce Connerley via USRP-users
> mailto:usrp-users@lists.ettus.com>> wrote:
> At the 2018 GRCon, EJ Kreinar spoke about improvem
Rob
I ran into this when running the tutorial test bench. I was able to change the
part used for the test bench by changing ARCH and PART_ID in
uhd/fpga-src/usrp3/tools/make/viv_sim_preamble.mak
# ---
# Setup simulation
# -
At the 2018 GRCon, EJ Kreinar spoke about improvements to the RFNoC polyphase
channelizer. Has there been any activity on this?
Royce Connerley
___
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_li
I’m struggling with setting up a RFNoC development machine. I have been
following the instructions on:
https://kb.ettus.com/Software_Development_on_the_E3xx_USRP_-_Building_RFNoC_UHD_/_GNU_Radio_/_gr-ettus_from_Source
I was getting an error related to "too many arguments" for a function
polar_d
