PM, Olivier Ravard via USRP-users wrote:
>> Hi,
>>
>> In order to synchronize several devices, We used to use an external PPS and
>> 10MHz
>> reference and call set_next_time_pps.
>>
>> This works fine since many years using UHD 3.9 and N210. We recently
Hi,
In order to synchronize several devices, We used to use an external PPS and
10MHz
reference and call set_next_time_pps.
This works fine since many years using UHD 3.9 and N210. We recently use X300 +
TwinRx
using UHD 3.10.3 and it seems
that it does not work.
It seems that set_time_next_pp
an information: using a 10Gb/s SFP+ to RJ45 module, it works.
Thanks for your help.
Olivier
Le 04/02/2020 à 11:20, Marcus Müller a écrit :
> Ah, my bad, I was assuming you had a 10GBase-T SFP+ module. Sorry for
> the confusion.
> On Tue, 2020-02-04 at 09:26 +0100, Olivier Ravard via U
Le 03/02/2020 à 17:45, Marcus D. Leech via USRP-users a écrit :
> On 02/03/2020 06:36 AM, Olivier Ravard via USRP-users wrote:
>> The green led at the back of the device (port 1) is on and the second on
>> (orange) blink
>> some times.
>> The "link" led
vier,
>
> all this is basically standard Ethernet, so it *should* work.
> Do the link indicator LEDs on the USRP blink?
>
> Best regards,
> Marcus
> On Mon, 2020-02-03 at 12:14 +0100, Olivier Ravard via USRP-users wrote:
>> Hello,
>>
>> Is it possible to conn
Hello,
Is it possible to connect a X300 device to a 10Gb/s BaseT network using the
SFP+ to RJ45
adaptator ?
I do this test but I am unablme to ping the device (using 192.168.40.2 ip on
port 1)
regards,
Olivier
signature.asc
Description: OpenPGP digital signature
__
than I would expect.
>>>
>>> What is your tunes frequency. What gain setting? Are you getting overruns
>>> during the
>>> measurement?
>>>
>>>
>>> Sent from my iPhone
>>>
>>>> On Nov 6, 2019, at 6:32 AM, Olivier
er
Le 06/11/2019 à 17:59, Marcus D Leech a écrit :
> That is more passband ripple than I would expect.
>
> What is your tunes frequency. What gain setting? Are you getting overruns
> during the
> measurement?
>
>
> Sent from my iPhone
>
>> On Nov 6, 2019
