Cfzj28%40psu.edu%7Cc4ad2d5a98a04dae3d0e08d725a5647f%7C7cf48d453ddb4389a9c1c115526eb52e%7C0%7C0%7C637019264596274830&sdata=wW8qjohTx67FbjPib2BHsJSPtKY4VT2XvO8VbqywV9Y%3D&reserved=0>
Regards,
Nate Temple
On Tue, Aug 20, 2019 at 11:09 AM Jiang, Fengyang via USRP-users
mailto:usrp-users@lists.et
quot;);
at the appropriate place in your code to configure timing.
-Sam
On Tue, Aug 20, 2019 at 1:09 PM Jiang, Fengyang via USRP-users
mailto:usrp-users@lists.ettus.com>> wrote:
Hi all,
I'm trying to synchronize 2 USRP N210 devices using the OctoClock-G CDA-2990 as
e
Hi all,
I'm trying to synchronize 2 USRP N210 devices using the OctoClock-G CDA-2990 as
external 10MHz reference and PPS sources. It is said that I need to set up two
configurations:
usrp->set_clock_source("external");
usrp->set_time_source("external");
Which file in which path should I modify
Hi Marcus,
Got it, thanks a lot for your help!
Best,
Fengyang
发件人: USRP-users 代表 Marcus D. Leech via
USRP-users
发送时间: 2019年6月21日 16:18
收件人: usrp-users@lists.ettus.com
主题: Re: [USRP-users] AGC in USRP
On 06/21/2019 03:43 PM, Jiang, Fengyang via USRP-users
Hi,
I'm using USRP to transmit and receive some signals. Can I use correlation to
compare the strength of received signals across different experiments? Each
time I will increase the distance between the transmitter and the receiver by a
little, and is there an AGC or other modules which will a
Hi,
I'm transmitting a signal and receiving it using USRPs and want to estimate the
frequency offset, but I'm getting something confusing.
I'm using 2.45GHz for the transmitting, and the sampling rate is 1MHz. The
signal consists of 5 repeated preambles, and each of them has 100 data points
(i
Hi Michael,
I've been trying different ways on that, and after resetting both two USRPs,
they began to work. I've been using them for several days but only configured
them once at the very beginning, maybe something went wrong with the system..
now they work at the ~5GHz range. I apologize for
Hi All,
I'm using two usrps to transmit a preamble from one to the other. When I use
2.437GHz, 2.45GHz and 2.5GHz, it works, but if I use 5GHz, 5.3GHz, 5.8GHz, I
will get nothing at the receiver side. What could be the problem?
Devices being used:
USRP N210. https://www.ettus.com/all-products/U
