On the b200mini, the 1pps actually *does* steer the internal reference.
Which is different behaviour then the rest of the entire Ettus lineup I
believe.
For details on how it works, see
uhd/fpga/usrp3/top/b2xxmini/b205_ref_pll.v. It autodetects the external
reference type and applies the appropria
On Thu, Aug 13, 2020 at 4:53 PM Marcus D. Leech
wrote:
> Has it always had this problem, or did it develop over time?
>
This is a new development, so yes.
If you revert to UHD 3.14 does it display the same issue?
>
Yes.
Does anyone have an FPGA build with chipscope hooked up to the
b200_ref_
On Thu, Aug 13, 2020 at 3:14 PM Marcus D. Leech via USRP-users <
usrp-users@lists.ettus.com> wrote:
> How are you detecting "lock"
By querying the "ref_locked" sensor, and also looking at the LED which is
consistent.
> Could you share a code snippet of how you set up the clocking parameters?
Hi there,
I have a problem with my b200mini application, where it will lock to my GPS
sourced 1PPS when run 'cold', but if I restart the application it never
locks. After I unplug the b200mini and let it sit for a while, it will work
again. I can also hit the TCXO with a little bit of canned air a
The pinout for the e320 GPIO connector at
https://files.ettus.com/manual/page_gpio_api.html does not indicate which
pin is used for the return current. Is it pin 17 (non-mini HDMI) which HDMI
uses for the single ended signal return?
On a related note, will the schematics for e320 ever be released?
