image with uhd_image_builder_gui.py and see if you
get the same error?
Jonathon
On Wed, Jul 31, 2019 at 8:29 AM 汤 飞 via USRP-users
mailto:usrp-users@lists.ettus.com>> wrote:
Hi all,
I am studying the application note "Getting Started with RFNoC Development".
I was able to
Hi all,
I am studying the application note "Getting Started with RFNoC Development".
I was able to complete the simulation of custom noc_block_gain, but failed in
the final stage of the synthesis.
The custom block "gain" cannot be found.
I use the following command, "./uhd_image_builder.py gain
TUs greater than 1500 despite
ethnology telling them to. Some Realtek for example.
If it’s just 1G try default MTU of 1500 and work your way up to see where it
fails.
Sent from my iPhone
On Jul 23, 2019, at 7:15 PM, 汤 飞 via USRP-users
mailto:usrp-users@lists.ettus.com>> wrote:
It’s a 1g SF
ually do MTUs greater than 1500 despite
ethnology telling them to. Some Realtek for example.
If it’s just 1G try default MTU of 1500 and work your way up to see where it
fails.
Sent from my iPhone
On Jul 23, 2019, at 7:15 PM, 汤 飞 via USRP-users
mailto:usrp-users@lists.ettus.com>> wrote:
y telling them to. Some Realtek for example.
If it’s just 1G try default MTU of 1500 and work your way up to see where it
fails.
Sent from my iPhone
On Jul 23, 2019, at 7:15 PM, 汤 飞 via USRP-users
mailto:usrp-users@lists.ettus.com>> wrote:
It’s a 1g SFP0 link. I set MTU to 8000 according
me Realtek for example.
If it’s just 1G try default MTU of 1500 and work your way up to see where it
fails.
Sent from my iPhone
On Jul 23, 2019, at 7:15 PM, 汤 飞 via USRP-users
mailto:usrp-users@lists.ettus.com>> wrote:
It’s a 1g SFP0 link. I set MTU to 8000 according to the Appli
appropriately. I set mine to 9000.
Sam Reiter
SDR Support Engineer
Ettus Research
On Fri, Jul 19, 2019 at 2:21 AM 汤 飞 via USRP-users
mailto:usrp-users@lists.ettus.com>> wrote:
Hi, all,
When benchmarking my N310, I keep getting such [RX FLOW CTRL] errors.
What causes this and how
27;re connected over a 10GbE link, make sure to set your host's MTU
appropriately. I set mine to 9000.
Sam Reiter
SDR Support Engineer
Ettus Research
On Fri, Jul 19, 2019 at 2:21 AM 汤 飞 via USRP-users
mailto:usrp-users@lists.ettus.com>> wrote:
Hi, all,
When benchmarking my N310, I
Hi, all,
When benchmarking my N310, I keep getting such [RX FLOW CTRL] errors.
What causes this and how to solve it?
Thanks in advance!
FT
/usr/local/lib/uhd/examples/benchmark_rate \
>--args
> "type=n3xx,mgmt_addr=192.168.10.2,addr=192.168.10.2,master_clock_rate=122.88e6"
> \
>--du
