> > The REF OUT support on X310 has never been a top priority for the dev team,
> > and I suspect that this is a shortcoming in the FPGA. I've put in a
> > query into Ettus R&D, but it might be a day or two until I get an answer.
Thank you for your reply, I await your return.
> Are you using
On Thu, Aug 3, 2023 at 4:24 AM EVAN LAURANS
wrote:
> Hi all,
>
> I use the USRP X310 to analyze signal and i use the 10 MHz REF OUT for an
> external device. I noticed that’s the REF OUT hasn’t a frequency of 10 MHz
> when i am using a 184.32 MHz master clock rate but about 9.96 MHz, whereas
> th
On 03/08/2023 04:22, EVAN LAURANS wrote:
Hi all,
I use the USRP X310 to analyze signal and i use the 10 MHz REF OUT for an
external device. I noticed that’s the REF OUT hasn’t a frequency of 10 MHz when
i am using a 184.32 MHz master clock rate but about 9.96 MHz, whereas the REF
OUT frequenc
2 are back, the other 2 will probably need to be reflashed over jtag and NICs
wont respond.
Thanks,
From: Marcus D. Leech
Sent: Tuesday, July 25, 2023 10:08 AM
To: Tillson, Bob (US) ;
usrp-users@lists.ettus.com
Subject: Re: [USRP-users] Re: Network Link Issue
External Email Alert
This email
Hi all,
I use the USRP X310 to analyze signal and i use the 10 MHz REF OUT for an
external device. I noticed that’s the REF OUT hasn’t a frequency of 10 MHz when
i am using a 184.32 MHz master clock rate but about 9.96 MHz, whereas the REF
OUT frequency is 10 MHz with a master clock rate of 200
