Thanks Jeff
On Fri, May 19, 2017 at 4:59 PM, Jeff Squyres (jsquyres) wrote:
> Open MPI v2.1.x does not support checkpoint restart; it was unmaintained
> and getting stale, so it was removed.
>
> Looks like we forgot to remove the cr MPI extension from the v2.1.x
> release series when we removed
Open MPI v2.1.x does not support checkpoint restart; it was unmaintained and
getting stale, so it was removed.
Looks like we forgot to remove the cr MPI extension from the v2.1.x release
series when we removed the rest of the checkpoint restart support. Sorry for
the confusion.
> On May 19,
Dear all,
I am trying to compile ompi 2.1.0 with support for checkpoint using blcr.
openmpi-2.1.0# ./configure --enable-mpi-ext=cr
--- MPI Extension cr
configure: WARNING: Requested "cr" MPI cr, but cannot build it
configure: WARNING: because fault tolerance is not enabled.
configure: WARNING: Try
Below are the results from the ibnetdiscover command This command was
run from node smd.
#
# Topology file: generated on Fri May 19 15:59:47 2017
#
# Initiated from node 0002c903000a0a32 port 0002c903000a0a34
vendid=0x8f1
devid=0x5a5a
sysimgguid=0x8f105001094d3
switchguid=0x8f105001094d2(8f1050
" i do not think btl/openib can be used with QLogic cards
(please someone correct me if i am wrong)"
You are wrong :) . The openib BTL is the best one to use for interoperability
between QLogic and Mellanox IB cards.
The Intel True Scale (the continuation of the QLogic IB product line) Host SW
As I think it's not relevant to Open MPI itself, I answered in PM only.
-- Reuti
> Am 18.05.2017 um 18:55 schrieb do...@mail.com:
>
> On Tue, 9 May 2017 00:30:38 +0200
> Reuti wrote:
>> Hi,
>>
>> Am 08.05.2017 um 23:25 schrieb David Niklas:
>>
>>> Hello,
>>> I originally ported this question
Yes, using " -pami_noib" solve the problem, I lost the previous message.
Thanks you so much for the support.
2017-05-19 11:12 GMT+02:00 John Hearns via users :
> I am not sure I agree with that.
> (a) the original error message from Gabriele was quite clear - the MPI
> could not find an interface
ps. One take away for everyone working with MPI.
Turn up the error logging or debug level.
then PAY ATTENTION to the error messages.
I have spent a LOT of my time doing just that - with OpenMPI and with Intel
MPI over Omnipath and other interconnects in the dim and distant past.
The guy or girl wh
I am not sure I agree with that.
(a) the original error message from Gabriele was quite clear - the MPI
could not find an interface card which was up, so it would not run.
(b) Nysal actually pointed out the solution which looks good - after
reaidng the documentation.. use pami_noib
(c) Having disc
Ok Gilles, the output of
mpirun --mca pml ^pami --mca btl_base_verbose 100
is in attached
2017-05-19 10:05 GMT+02:00 Gilles Gouaillardet :
> Gabriele,
>
>
> i am sorry, i really meant
>
> mpirun --mca pml ^pami --mca btl_base_verbose 100 ...
>
>
> Cheers,
>
> Gilles
>
> On 5/19/2017 4:28 PM, Ga
If I might interject here before lots of time is wasted. Spectrum MPI is an IBM
-product- and is not free. What you are likely running into is that their
license manager is blocking you from running, albeit without a really nice
error message. I’m sure that’s something they are working on.
If y
Hi Gilles, in attach the outpuf of:
mpirun --mca btl_base_verbose 100 -np 2 ...
2017-05-19 9:43 GMT+02:00 Gilles Gouaillardet :
> Gabriele,
>
>
> can you
>
> mpirun --mca btl_base_verbose 100 -np 2 ...
>
>
> so we can figure out why nor sm nor vader is used ?
>
>
> Cheers,
>
>
> Gilles
>
>
>
> O
Gabriele,
i am sorry, i really meant
mpirun --mca pml ^pami --mca btl_base_verbose 100 ...
Cheers,
Gilles
On 5/19/2017 4:28 PM, Gabriele Fatigati wrote:
Using:
mpirun --mca pml ^pami --mca pml_base_verbose 100 -n 2 ./prova_mpi
I attach the output
2017-05-19 9:16 GMT+02:00 John Hearns
hi Gabriele,
You can check some of the available options here -
https://www.ibm.com/support/knowledgecenter/en/SSZTET_10.1.0/smpi02/smpi02_interconnect.html
The "-pami_noib" option might be of help in this scenario. Alternatively,
on a single node, the vader BTL can also be used.
Regards
--Nysal
Add —mca btl self,vader
-Nathan
> On May 19, 2017, at 1:23 AM, Gabriele Fatigati wrote:
>
> Oh no, by using two procs:
>
>
> findActiveDevices Error
> We found no active IB device ports
> findActiveDevices Error
> We found no active IB device ports
> --
Gabriele,
can you
mpirun --mca btl_base_verbose 100 -np 2 ...
so we can figure out why nor sm nor vader is used ?
Cheers,
Gilles
On 5/19/2017 4:23 PM, Gabriele Fatigati wrote:
Oh no, by using two procs:
findActiveDevices Error
We found no active IB device ports
findActiveDevices Erro
BTLs attempted: self
That should only allow a single process to communicate with its self
On 19 May 2017 at 09:23, Gabriele Fatigati wrote:
> Oh no, by using two procs:
>
>
> findActiveDevices Error
> We found no active IB device ports
> findActiveDevices Error
> We found no active IB device
Using:
mpirun --mca pml ^pami --mca pml_base_verbose 100 -n 2 ./prova_mpi
I attach the output
2017-05-19 9:16 GMT+02:00 John Hearns via users :
> Gabriele,
> as Gilles says if you are running within a single host system, you don not
> need the pami layer.
> Usually you would use the btls sm,
Allan,
remember that Infiniband is not Ethernet. You dont NEED to set up IPOIB
interfaces.
Two diagnostics please for you to run:
ibnetdiscover
ibdiagnet
Let us please have the reuslts ofibnetdiscover
On 19 May 2017 at 09:25, John Hearns wrote:
> Giles, Allan,
>
> if the host 'smd'
Giles, Allan,
if the host 'smd' is acting as a cluster head node it is not a must for it
to have an Infiniband card.
So you should be able to run jobs across the other nodes, which have Qlogic
cards.
I may have something mixed up here, if so I am sorry.
If you want also to run jobs on the smd hos
Oh no, by using two procs:
findActiveDevices Error
We found no active IB device ports
findActiveDevices Error
We found no active IB device ports
--
At least one pair of MPI processes are unable to reach each other for
MPI com
Hi GIlles,
using your command with one MPI procs I get:
findActiveDevices Error
We found no active IB device ports
Hello world from rank 0 out of 1 processors
So it seems to work apart the error message.
2017-05-19 9:10 GMT+02:00 Gilles Gouaillardet :
> Gabriele,
>
>
> so it seems pml/pami a
Gabriele,
as Gilles says if you are running within a single host system, you don not
need the pami layer.
Usually you would use the btls sm,selfthough I guess 'vader' is the
more up to date choice
On 19 May 2017 at 09:10, Gilles Gouaillardet wrote:
> Gabriele,
>
>
> so it seems pml/pami ass
Allan,
i just noted smd has a Mellanox card, while other nodes have QLogic cards.
mtl/psm works best for QLogic while btl/openib (or mtl/mxm) work best
for Mellanox,
but these are not interoperable. also, i do not think btl/openib can be
used with QLogic cards
(please someone correct me i
Gabriele,
so it seems pml/pami assumes there is an infiniband card available (!)
i guess IBM folks will comment on that shortly.
meanwhile, you do not need pami since you are running on a single node
mpirun --mca pml ^pami ...
should do the trick
(if it does not work, can run and post the
-- Forwarded message --
From: Gabriele Fatigati
Date: 2017-05-19 9:07 GMT+02:00
Subject: Re: [OMPI users] IBM Spectrum MPI problem
To: John Hearns
If I understand well, when I launch mpirun by default try to use
Infiniband, but because there are no infiniband module the run fail
Hi John,
Infiniband is not used, there is a single node on this machine.
2017-05-19 8:50 GMT+02:00 John Hearns via users :
> Gabriele, pleae run 'ibv_devinfo'
> It looks to me like you may have the physical interface cards in these
> systems, but you do not have the correct drivers or librarie
27 matches
Mail list logo
