Public bug reported:
(minor issue)
Steps to reproduce:
- Install a snap application, e.g: sudo snap install retroarch
- Open application menu and go to group where apllication is supposed to show
up, e.g. games
What should happen:
- An entry to run the application should be shown
What happens
I haven't tried restarting the LXQt panel, but I suppose it would work.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801423
Title:
snap applications only show up in the applications menu after a
I am unsure what do you mean by "make the changes"? It only happens when
I save a configuration and restart the pc. If I change the display
resolution, but don't save it then it doesn't happen (neither
immediately and neither after I restarting the PC). I hope this answers
your question...
--
You
This bug is still affecting me and others that I know.
When using IPv6 with SLAAC you randomly get a new address since you
can't be sure which interface is choosen on boot.
A solution to this problem would be very welcome!
--
You received this bug notification because you are a member of Ubuntu
There is indeed a difference between xorg and wayland. If I login using an
xorg session it works.
Op wo 21 feb. 2018 om 14:11 schreef Robert Orzanna <
1733...@bugs.launchpad.net>:
> Maybe the issue is actually related to Wayland? Do you notice a difference
> between Xorg and Wayland session?
>
>
It's back! Me too on Ubuntu 18.04.2 LTS.
Maybe it was package keyboard-configuration_1.178ubuntu2.8_all.deb?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/520546
Title:
Alt+KEY incorrectly behaves l
Updated Ubuntu-18.04 LTS, rebooted and problem is gone.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/520546
Title:
Alt+KEY incorrectly behaves like Ctrl+Alt+KEY, and/or unwanted VT
switch from Al
I disabled screensaver (Mode, select Disable Screen Saver).
After it turns black, it stays black.
I have installed Lubuntu 19.04 and I noticed the same issue. However, I
also noticed that the screen fades to black on if auto login is enabled.
I searched the internet for autologin and black screen
** Changed in: lxqt-config (Ubuntu)
Status: Incomplete => New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801421
Title:
lqxt-config-monitor saved altered display resolution triggers displa
On Debian the group name is 'adm' as , so i think keeping it that way
would indeed prevent confusion.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1767801
Title:
Wrong group name "admin" instead of
Noticed this as well. I saw the iscsid daemon running on my systems, but
found out that these were installed by default.
root@sat01:~# apt remove open-iscsi
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically ins
I just ran into the same issue on a 16.04 system in a IPv6-only network.
My network configuration looks like this:
auto eno1
iface eno1 inet6 dhcp
The fix posted by Graham works for me. After modifying that line I succesfully
get DHCPv6 after a clean reboot.
** Changed in: ifupdown (Ubuntu)
I have sent a patch for this upstream to Debian. Waiting for it to get
accepted.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1543352
Title:
inet6 dhcp doesn't wait for link-local address to leave
The patch has been accepted upstream: https://anonscm.debian.org/cgit
/collab-
maint/ifupdown.git/commit/?id=bfca5654959d27603eb50747d9998b92f1d7eb41
Version 0.8.11 should be released soon which should fix this issue.
Ubuntu can then fetch this from upstream.
--
You received this bug notificati
Public bug reported:
Just popped up while working in the terminal.
ProblemType: Package
DistroRelease: Ubuntu 13.04
Package: libwxgtk-media2.8-0 (not installed)
ProcVersionSignature: Ubuntu 3.8.0-33.48-generic 3.8.13.11
Uname: Linux 3.8.0-33-generic i686
NonfreeKernelModules: openafs
ApportVersio
Public bug reported:
Used Control-Alt-F1 to run the do-release-upgrade and left overnight. In
the morning it was stuck on a screen asking if I wanted to keep the old
file or replace with the package managers new version. After the
selection it requested the root password or Control-D to continue.
0.8.11 is out now in Ubuntu and has these fixes.
Ubuntu 16.04 LTS is now released with this bug in there.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1543352
Title:
inet6 dhcp doesn't wait for li
Public bug reported:
Tried running "di-netboot-assistant install utopic", it complains:
For security reasons, it is recommended to use the installer packages
debian-installer-*-netboot-*.
This is probably relevant when trying to prepare a debian netbook, but on
ubuntu these packages are not ava
Public bug reported:
CephFS filesystems can become huge. It's networking filesystem for a
client and clients should not index data on CephFS filesystems.
I suggest that "ceph" and "fuse.ceph" is added to "PRUNEFS" in
/etc/updatedb.conf to prevent all the clients to start indexing this
network fil
I agree. At least installed the vlan and ifenslave-2.6 package by
default.
Sure, I can select these packages during the installation, but that's a
lot of work and something which is easily forgotten.
I can also attach the ISO later on and use apt-cdrom, but again, it's a
hassle.
If there is no o
Hi Kevin,
No, I didn't. If you could do that it would be great.
Wido
> Op 21 mei 2015 om 01:20 heeft Ken Dreyer \(Red Hat\) het
> volgende geschreven:
>
> Wido, did you end up filing a bug with Debian on this? If not, I can do
> so.
>
> --
> You received this bug notification because you a
Public bug reported:
Whenever i start and log in on ubuntu, this message appears
ProblemType: Package
DistroRelease: Ubuntu 13.10
Package: fonts-droid 1:4.2.r1-2
ProcVersionSignature: Ubuntu 3.11.0-13.20-generic 3.11.6
Uname: Linux 3.11.0-13-generic x86_64
ApportVersion: 2.12.5-0ubuntu2.1
Archite
*** This bug is a duplicate of bug 1368094 ***
https://bugs.launchpad.net/bugs/1368094
Many applications will require Java 8 during the lifetime of 14.04. It
would be very useful if OpenJDk 8 was backported to Ubuntu 14.04.
--
You received this bug notification because you are a member of Ub
I know this is an old thread, but this bug was also affecting me on
Ubuntu 15.10.
Removing ~/.config/transmission/ also fixed the problem for me
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/959616
T
I'm seeing the same behavior on my 12.04 and 14.04 systems.
I wanted to deploy a fairly large (50 servers) IPv6 only setup using
SLAAC but I had to revert to static IPv6 configuration due to this issue
with Ubuntu.
Configuring static mac addresses isn't something I want either, so for
now I'm sti
Public bug reported:
Already had a reaction from the debug department, that this issue was
reported and upgraded to status priority HIGH!
ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: software-center 2.0.7
ProcVersionSignature: Ubuntu 2.6.32-33.72-generic 2.6.32.41+drm33.18
Uname: Lin
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/862274
Title:
package software-center 2.0.7 failed to install/upgrade: subproces
installed post-installation script gaf een foutwaarde 1 terug
To mana
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/872746
Title:
package software-center 2.0.7 failed to install/upgrade: subproces
installed post-installation script gaf een foutwaarde 1 terug
To mana
Public bug reported:
same problem again.
ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: software-center 2.0.7
ProcVersionSignature: Ubuntu 2.6.32-34.77-generic 2.6.32.44+drm33.19
Uname: Linux 2.6.32-34-generic i686
Architecture: i386
Date: Wed Oct 12 11:21:3
I'm seeing the same issue.
We have a Intel Dual NIC in a Ubuntu 12.04.1 machine with LACP Bonding
configured.
I tried this kernel: 3.5.0-030500-generic
Still having packets being dropped on eth0, eth1 and bond0.
** Changed in: linux (Ubuntu)
Status: Expired => Confirmed
--
You received
Has there been any progress on this? I see that librbd is still in
universe?
You might want to take a look at:
https://bugs.launchpad.net/ubuntu/+source/ceph/+bug/837667/
Currently version 0.38 is in Ubuntu, but the Ceph project is going
pretty fast, I suggest that another pull of the Ceph code i
Could this be reviewed for the upcoming LTS (12.04) again? Currently
Ceph 0.39 is out, but the project is moving pretty fast in a good
direction.
Users of Ubuntu would get the best experience if a more recent version
(Like the upcoming 0.40) was included in 12.04.
--
You received this bug notifi
Same problem on Mint 14 KDE (based on ubuntu 12.04),
Using a HP 550 laptop.
Shutdown results in end logo showing... indefenitly.
I am not using nvidia drivers btw, i got one of the crappy intel
chipsets.
However, on my main system i dont have a problem with any ubuntu build.
I'm suspecting some
Just noticed something... the wireless drivers.
My problems start after installing both the linux-nonfree-firmware and the b34
drivers.
Any of you that have the same?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launc
wireless card is the infamous broadcom chip.
dunno the type from top of my head... but forums are full of "how to get it
working"
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/987220
Title:
System
Public bug reported:
I'm using the Ubuntu Cloud Archive and I'm encountering a incomplete
libvirt AppArmor profile.
My libvirtd.log is showing lines like this:
2013-07-24 13:41:35.254+: 2995: warning : virAuditSend:135 : Failed
to send audit message virt=kvm op=start reason=booted vm="r-1163
Public bug reported:
On Ubuntu 11.04:
xen-utils-3.3 : Depends: python-xen-3.3 but it is not going to be installed
Recommends: libc6-xen but it is not installable
E: Broken packages
E: Package 'libc6-xen' has no installation candidate
** Affects: xen-3.3 (Ubuntu)
Importance
No matter why it "exits with code 1", the message is utterly useless.
Might as well be code 42!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/784174
Title:
kpackage fails on maverick (10.10) to natt
Public bug reported:
i think some parts of install are conflicting.
ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: software-center 2.0.7
ProcVersionSignature: Ubuntu 2.6.32-32.62-generic 2.6.32.38+drm33.16
Uname: Linux 2.6.32-32-generic i686
Architecture: i386
Date: Fri Jul 15 10:5
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/810954
Title:
package software-center 2.0.7 failed to install/upgrade: subproces
installed post-installation script gaf een foutwaarde 1 terug
To mana
Public bug reported:
this happend after installing a new version of firefoxdifferent than
the version within Ubuntu package
ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: software-center 2.0.7
ProcVersionSignature: Ubuntu 2.6.32-33.70-generic 2.6.32.41+drm33.18
Uname: Linux 2.6.32-
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/815569
Title:
package software-center 2.0.7 failed to install/upgrade: subproces
installed post-installation script gaf een foutwaarde 1 terug
To mana
The bug is closed already, but here is an update on this 'bug'. I
recently installed Windows XP on this notebook and.. guess what, the
same problem is there after an unexpected shutdown. Rebooting about 5-6
times reenables the network. My best guess now is that this is a
hardware problem and has ne
Thank you for the response!
ii freeipmi-common 1.6.4-3ubuntu1.1
all GNU implementation of the IPMI protocol - common files
ii freeipmi-tools1.6.4-3ubuntu1.1
amd64GNU implementation of the I
I tried this on two Dell R6525 machines running. One with 18.04 the
other with 20.04
On the 20.04 machine the Lan6_Conf section is missing.
** UBUNTU 18.04 **
root@hv-138-e14-25:~# dmidecode memory|grep R6525
Product Name: PowerEdge R6525
SKU Number: SKU=NotProvided;ModelName=Po
I would love to test this with a PPA package on one of our systems.
We rely on IPv6 for our IPMI systems and have now noticed this has
broken after upgrading to 20.04
We follow a rather 'slow' process. We usually use HWE kernels for a
longer period prior to upgrading. This is now breaking many of
See the attached file where I used the PPA from Fantu with an updated
version of freeipmi.
The Lan6_Conf section is back as expected.
And yes, this seems like a major regression to me. This all worked fine
under Ubuntu 18.04 LTS and is suddenly removed when going to a newer LTS
version.
We depen
Public bug reported:
In bug #1645912 support for the Lan6_Conf section was added:
https://bugs.launchpad.net/ubuntu/+source/freeipmi/+bug/1645912
This also worked on our Ubuntu 18.04 systems, but does not seem to work
anymore on our Ubuntu 20.04 systems.
We use these systems:
- SuperMicro AS-11
Is there a way I can help here?
The code works and we are happy with it. What else is needed to get the
packages into 22.04 Jammy?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1962743
Title:
[BPO]
Yes, that backport works for me. However, we want it in Focal as well.
How do we get that fixed?
A sponsor is needed? I can say the code works, but how to resolve the
backport issue?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
htt
There's an addititional problem though: to make mod_evasive send mails
properly it should be using mailx -t, but that'd most likely break
alternatives.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/189
Public bug reported:
I tried to change the nameservers like
netplan set "ethernets.eth0.nameservers.addresses=[192.168.100.1,
192.168.100.19]"
and found
nameservers:
addresses:
- 192.168.100.1
- 8.8.8.8
- 192.168.100.19
Existing nameservers do not get del
Although the bug persists, there is quite an easy workaround for this:
* Instead of opening Revelation and configure it to open a password file
on start up, open the password file directly. Gnome has associated the
application to open the password file with (which is Revelation) and
will start Rev
Public bug reported:
hallo... ik werk met firefox 3.0.5 en ubuntu linux 8.10 en ACS kaartlezer
ACR38Utelkenmale ik ergens op een website met EID toepassingen (bv. op 1
van deze sites : http://eid.startpagina.be// geweest ben , en ik trek mijn
paspoort uit de lezer, of ik trek mijn USB fiche
My sound is still locked. For example I want to listen to music, youtube
& Skype, that is no go :( I can only run 1 program for using sound
--
[Fiesty] Sound device is locked when playing a movie in VLC
https://bugs.launchpad.net/bugs/128151
You received this bug notification because you are a me
@Realtime Dutchman
Have you got a amd64 build for the rt-kernel, or could you give me instructions
how to do it ?
I've build an rt-kernel in the last couple of weeks following the advice
from vivichrists post https://bugs.launchpad.net/ubuntu/+source/linux-
rt/+bug/290498/comments/26 and the Mast
Public bug reported:
Binary package hint: dictd
I'd like all network services to be dual-stack, both ipv4 and ipv6
For as far as I can see, dictd only listens on an ipv4 address
version 1.10.10.dfsg-1ubuntu1
ProblemType: Bug
Architecture: amd64
Date: Thu May 28 16:17:36 2009
DistroRelease: Ubunt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/27240862/Dependencies.txt
--
dictd does not support ipv6
https://bugs.launchpad.net/bugs/381324
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mai
Problem still not solved!?
--
Compiz / vnc screen refresh with nvidia-restricted driver/VirtualBox/ATI fglrx
driver
https://bugs.launchpad.net/bugs/353126
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubun
*** This bug is a duplicate of bug 353126 ***
https://bugs.launchpad.net/bugs/353126
The newest version of Vino from Jonh Wendell has solved my problem thx.
--
compiz / vnc screen updates with nVidia restricted
https://bugs.launchpad.net/bugs/77442
You received this bug notification because
Sorry, it's with the newest version of Vino from Jonh Wendell has solved
my problem thx.
--
Compiz / vnc screen refresh with nvidia-restricted driver/VirtualBox/ATI fglrx
driver
https://bugs.launchpad.net/bugs/353126
You received this bug notification because you are a member of Ubuntu
Bugs, whi
Public bug reported:
Release: Ubuntu 9.04
Version: 1:0.8.2-0ubuntu8.1
Problem: I assigned 2 of my mouse buttons to 'rotate cube'. This works most of
the time, but sometimes the mouse event gets redirected to the window the
cursor is currently over, and 'rotate cube' is not triggered. ( I tested
this is what I get when I lauch kdenlive from the command line
~$ kdenlive
kdenlive(15546) MainWindow::parseProfiles: RESULTING MLT PATH:
"/usr/share/mlt/profiles/"
kdenlive(15546) initEffects::parseEffectFiles: // INIT EFFECT SEARCH
kdenlive(15546) Render::Render: // USINGÂ PROFILE:
Solved for me too. Thnks
--
kdenlive crashes with SIGSEV 11 upon starting
https://bugs.launchpad.net/bugs/363265
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubun
I just installed a fresh Jaunty and I am experiencing the same problem.
When I'm copying large files the responsiveness of the system goes down
dramatically. You practically cannot use the system any more. It takes
ages for the top menu to load (its icons) and when you start a simple
program like t
Pete,
I've worked around this problem (so far anyway) by pinning my Xorg back to the
hardy version, following the apt-pinning howto at:
http://www.howtoforge.com/a-short-introduction-to-apt-pinning
The -t argument to apt-get didn't seem to work quite as described, so I ended
up with a very ve
Milan: I did a fresh install of Jaunty on an empty SATA harddisk. The
rest of the machine is the same and I kept my PATA harddisk in to copy
the old files. That's when I noticed that while copying the interface
was sluggish. Something I always cursed Windows for and was one of my
true beliefs Linux
@Sebastien
I haven't tried it yet sorry. But my main Os (Ubuntu 9.04) was it solved after
a few days :S
@mbro
Thx, i gonna tried that if it happens after a reinstall soon...
--
Deleted files not moving to trash
https://bugs.launchpad.net/bugs/367385
You received this bug notification because yo
rate
bugs? One bug? Some of my backtraces reference other mi* functions, some
don't.
Thank you for your assistance on this.
Kind regards,
Christian van den Bosch
Bryce Harrington wrote:
> Christian and Tobias, neither of you have the same backtrace as Pete, as
> neither of y
@Sebastien Bacher
1) I think it is reproducible, because I did twice a fresh Ubuntu 9.04
installation. Onetime with ext4 and with ext3. The problem still exists.
However I haven't try it yet on a other pc/laptop.
2)
2.1) Burn the Image on a RW CD.
2.2) Try the install the Ubuntu 9.04 i386 in Dutc
This problem still exits with Ubuntu 9.04!
--
pulseaudio uses too much CPU
https://bugs.launchpad.net/bugs/207135
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubu
Sorry, but where can I find "gvfs-ls trash" list and "gvfs-monitor"? What is it?
Is this a file in username/.local/share/Trash?
--
Deleted files not moving to trash
https://bugs.launchpad.net/bugs/367385
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct
Ah thx, it is a command.
==This is on my working partition==
It seems that there is no trash (or prullenbak, that is Dutch for trash) folder
in my home directory.
However it's gvfs-ls trash: with :
Yes then I see the files...
Example:
gvfs-open trash:
Open trash:///, so that seems OK.
All of t
Public bug reported:
Binary package hint: netspeed
I removed the tracker package with synaptic and the netspeed applet disappeared.
Dunno if it has anything to do with the applets crash
Here's what I found in the output of dmesg :
netspeed_applet [3993] general protection ip:7f2a711a3308
sp:7ff
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/26114860/Dependencies.txt
--
netspeed applet crashed
https://bugs.launchpad.net/bugs/369052
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
KhaaL: thanks for pointing to that thread, but there is so much
information there that I cannot really separate all the issues at hand.
The test suite does not give any satisfactory results which I could
interpret. For now my best test is just to copy big files from PATA to
SATA disk, however the X
Update: running with 'mem=512m' seems to make performance just as bad as
on older/other kernels. Then I recalled some information about native
command queueing (thanks for the hint on your picture Jamie :)) and how
this could trash your disk on some older drive models. I already
disabled it on my f
@Thomas, I can try the 'time cat..' line later but I don't think it will
reveal information other than that catting the SATA harddisk is probably
faster, because the drive is generally faster (higher capacity per
platter, more cache).
@KhaaL, I must say that for the last test I used Anticipatory a
I haven't tried the patch suggested above but I can confirm that the
problem still exists in version shipped with the current beta of Ubuntu
8.10.
--
When auto-open a revelation password file, it gives an error
https://bugs.launchpad.net/bugs/96968
You received this bug notification because you a
No, the interface has changed in a way that when you select 'open file'
it will immediately give you a browse window, so the problem seems to
have disappeared.
--
[VLC] 'Open file' dialog fails when typing a directory in the location bar (or
even crashes VLC)
https://bugs.launchpad.net/bugs/9697
I have the same problem on my Ubuntu 8.10 beta/64 Bit. What I find
particularly strange is that I do have some VPN connections setup
manually in the /etc/ppp folder and these are working fine when I start
them with pon or poff.
--
[Intrepid] nm-applet VPN tab greyed out
https://bugs.launchpad.net
Public bug reported:
See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=455235
** Affects: multisync0.90 (Ubuntu)
Importance: Undecided
Status: New
--
convcard doesn't work at all
https://bugs.launchpad.net/bugs/237127
You received this bug notification because you are a member
Yes, I use crossfading. I have tested the file again with crossfading
turned off: then the track plays well.
--
Rhythmbox doesn't play some ogg files or stops playing them.
https://bugs.launchpad.net/bugs/249951
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
Binary package hint: compiz-fusion-plugins-main
I modified the wall.xml configuration file, to enable the edge delay.
Upon update of the compiz-fusion-plugins-main package, the user-modified
config file got overwritten by the package default without any prompt or
warning. I w
Same happens here. I uploaded another song that doesn't play here with
Rhythmbox, but does in Totem and also plays with the in this thread
suggested commandline.
** Attachment added: "Another file that does not play with Rhythmbox"
http://launchpadlibrarian.net/16675119/08%20Hysteria.ogg
--
R
For the record, working with Hardy 8.04, Rhythmbox 0.11.5...
Greetings, Ton
--
Rhythmbox doesn't play some ogg files or stops playing them.
https://bugs.launchpad.net/bugs/249951
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubunt
Reopening temporarily. This bug was closed out of the blue, without any
explanation. From my own research afterwards, it turns out it needs to
be moved to brainstorm.ubuntu.com. I'll do that in a minute.
I went to #ubuntu-bugs to ask, and found out Brainstorm now seems to be
the place to file non-
Moved to http://brainstorm.ubuntu.com/idea/12084/ as per #ubuntu-bugs
suggestions.
Please, bug triager, be more courteous next time!
** Changed in: debian-installer (Ubuntu)
Status: Incomplete => Invalid
--
geoip localisation suggestions
https://bugs.launchpad.net/bugs/34523
You received
o mistake. I really appreciate your volunteer contribution to
ubuntu! Thank you for that!
Sincerely,
Mark
--
Mark Van den Borre
Noormannenstraat 113
3000 Leuven, België
+32 486 961726
--
geoip localisation suggestions
https://bugs.launchpad.net/bugs/34523
You received this bug notification bec
Public bug reported:
eml2mbox is a utility for converting multiple eml email files to one
standard mbox file. It's a great tool for some conversions from MS
Outlook especially.
source: http://www.broobles.com/eml2mbox/
license: GPL >= 2.1.
** Affects: ubuntu
Importance: Undecided
S
** Attachment added: "Evolution_Description_field_limit_Appointment.png"
http://launchpadlibrarian.net/14621911/Evolution_Description_field_limit_Appointment%201.png
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/14621912/Dependencies.txt
** Attachment added: "ProcM
Public bug reported:
Binary package hint: evolution
1. I am using release Ubuntu 8.04.
2. The version of the package is:
evolution:
Installed: 2.22.1.1-0ubuntu2
Candidate: 2.22.1.1-0ubuntu2
Version table:
*** 2.22.1.1-0ubuntu2 0
500 http://archive.ubuntu.com hardy-proposed/main P
** Attachment added: "Evolution_Description_field_limit_Appointment.png"
http://launchpadlibrarian.net/14622150/Evolution_Description_field_limit_Appointment.png
--
Description field in Appointment, Tasks, Memos is not fully printed and
displayed in Print (Preview) output
https://bugs.launc
Bug still present in up-to-date 8.04 LTS as of 2008/05/26. Progress
upstream, but not squashed there yet.
** Summary changed:
- [Gutsy] Openstreetmap Potlatch editor is offset into the bottom-right corner
+ Openstreetmap Potlatch editor is offset into the bottom-right corner
** Tags added: hardy
Public bug reported:
Binary package hint: sysklogd
Description:Ubuntu 8.04.1
Release:8.04
/var/log/news is set up to be writable by news but syslogd tries to
write as user 'syslog' which fails. Workaround: chown syslog
/var/log/news/news.*
ProblemType: Bug
Architecture: amd64
Date:
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/20922398/Dependencies.txt
--
/var/log/news/news.* not writable by syslogd
https://bugs.launchpad.net/bugs/314107
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
This problem is still not solved!
Hopfully in Ubuntu 9?
--
iwl4965: kernel BUG at iwl4965-base.c:4222
https://bugs.launchpad.net/bugs/258485
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.
I have installed it, two things happend:
1) Nvidia drivers wouldn't install / run, so I had to use the x.org nv driver
2) after a while the pc froze; don't remember if I used ALT-F1 > sudo reboot,
or did a hard (power button) reset.
--
linux-rt restricted to one CPU
https://bugs.launchpad.net/b
Same here with a HP Compaq 6530b
Everything worked, except the wakeup
--
Wakeup timer doesn't work on HP Compaq 6710b
https://bugs.launchpad.net/bugs/349768
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ub
This freeze also occurs on KDE 4.2.2 with desktop effects after a bit of
use.
The process X has one thread stuck at
#0 0x7feeeb84dcd7 in ioctl () from /lib/libc.so.6
#1 0x7feee9e6b343 in drmIoctl () from /usr/lib/libdrm.so.2
#2 0x7feee9e6b5cb in drmCommandWrite () from /usr/lib/libd
301 - 400 of 1167 matches
Mail list logo
