Public bug reported:
Binary package hint: gnome-panel
I am using 8.04.1 Server with X and gnome installed.
I have a launcher on one of my gnome panels for "gnome-system-monitor".
I wanted to run it with root privileges so I added "sudo" before the
command (I did not know I should have been using
Thanks for the fast response, Sebastien. The cursor was not stuck, it
remained an arrow. However, the default animation that plays when
clicking a launcher (icon gets bigger and bigger while fades) was stuck.
The icon appeared large and transparent when the screen froze and the
keyboard became un
Success! Thanks to this comment from a similar, if not the same, bug:
https://bugs.launchpad.net/ubuntu/+bug/291371/comments/5
I disabled my unused onboard audio chip on my motherboard. When I
booted into Ubuntu all sounds were working. Even in Flash! There is
definitely a bug somewhere in thi
Public bug reported:
Binary package hint: soundconverter
Using Ubuntu 8.10, any mp3 file I convert to wav format using
soundconverter 1.3.2 produces an audio file with many artifacts. The
file will play but does not sound good. Instead of sounding like the
original file, there are many pops, sc
** Attachment added: "test_sounds.7z"
http://launchpadlibrarian.net/20325018/test_sounds.7z
--
mp3 file converted to wav format produces garbled output
https://bugs.launchpad.net/bugs/306599
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubu
Hello,
The old server I originally encountered this issue finally succumbed to
age and is no more. Since then, I have built a new server. I tried to
reproduce this issue on both my desktop and my server.
The desktop is running a fresh install of 9.04 and I am not able to
reproduce the issue the
It didn't really make sense to me either but it did work. I had tried
restarting the installation 3 or 4 times before I changed the mount
point. The moment it was not top-level it worked. Maybe it was a
coincidence though. Only the NTFS partition was affected by this
behavior.
This is not same
Until this is "fixed", what can we as a user community do to help
mitigate the annoyances caused by this bug? Would it be sufficient to
describe the issue and various workarounds in the relevant places in the
community documentation? Maybe here...
https://help.ubuntu.com/community/Fstab
https:/
*** This bug is a duplicate of bug 353126 ***
https://bugs.launchpad.net/bugs/353126
jjericho is right. The mouse clicks are actually doing something on the
server but the client screen does not refresh.
I was able to reproduce this connecting to Ubuntu 9.04 from Windows XP
using either Real
*** This bug is a duplicate of bug 353126 ***
https://bugs.launchpad.net/bugs/353126
** This bug has been marked a duplicate of bug 353126
Compiz / vnc screen refresh with nvidia-restricted driver/VirtualBox/ATI
fglrx driver
--
VNC Server not running correctly
https://bugs.launchpad.net/
Frédéric, thanks for the tip and fast response. Based on my googling,
this package is no longer necessary with 8.10. See this bug:
https://bugs.launchpad.net/ubuntu/+source/libflashsupport/+bug/267749
Since I used the Update Manager to upgrade to 8.10 I am guessing it
removed that package autom
I have libasound2-plugins already installed. I tried reinstalling and
rebooting but had the same behavior.
I tried an old deb of libflashsupport I found from here:
http://www.derekhildreth.com/blog/how-to-fix-the-no-sound-issue-in-
firefox-flash/ which I got from a Ubuntu forums post
http://ubunt
So, what is stopping this from getting fixed then?
--
mp3rename -p gives error
https://bugs.launchpad.net/bugs/199853
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists
Yep, libasound2-plugins is installed but still no sound. Is there
something else I need to install?
--
No sound when using Flash player (i.e. youtube.com, jamendo.com)
https://bugs.launchpad.net/bugs/291861
You received this bug notification because you are a member of Ubuntu
Bugs, which is subs
Sebastien, what is the expected behavior in this situation? If a user
prefixes his command in a launcher with 'sudo' instead of 'gksudo' what
should happen?
--
adding "sudo" before command in launcher in gnome panel freezes X session
https://bugs.launchpad.net/bugs/253504
You received this bug n
Alexander, I performed the following (please let me know if I did
something incorrectly)
1. renamed .asoundrc and .ascoundrc.asoundconf to .asoundrc.backup and
.asoundrc.asoundconf.backup
2. verified I have the libasound2-plugins package installed
3. added the following repositories using syn
I tried it on a different computer running 8.04.1 Desktop (as opposed to
8.04.1 Server with X and Gnome installed). I was unable to reproduce
the issue. The launcher did not open the application and I also saw
that sudo was not even running after clicking the launcher. However,
the machine did n
After upgrading to 8.10, I am no longer able to reproduce this bug.
--
computer locks up when I select screen saver
https://bugs.launchpad.net/bugs/256785
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubunt
Public bug reported:
Binary package hint: flashplugin-nonfree
I upgraded from 8.04 and lost my audio capabilities. Going to System >
Preferences > Sound and changing the Playback from ALSA to my specific
card (Audigy 1 [SB0090]...(ALSA)) restored my ability to play songs
through Rhythm Box or To
Alright, I'm back. I had to reinstall 8.10.
Before I reinstalled: I disabled the PPAs, downgraded the packages,
added the crimsun PPA, upgraded, no change. Removed the PPA and
downgraded again. Added the themuso PPA, upgraded, no change.
Rebooted. Then I couldn't login. I do not recall the e
I've also encountered a lockup when selecting a screen saver on Ubuntu
8.04. The mouse still moves around but I cannot click on anything. I
am unable to switch to a VT or kill X via CTRL+ALT+Backspace but I can
ssh in.
When the machine is frozen, I can ssh into it from another computer and
top r
bluespell, can you try something?
I clicked on a different screen saver after my computer locked up.
Nothing appeared to happen but after about 10 or 15 minutes, it became
responsive again.
It appears that instead of locking up, it was just running really really
slow. Do you get the same behavio
I have also encountered this bug. I found this patch from 2005 in the
debian mailing list http://www.mail-archive.com/debian-bugs-
[EMAIL PROTECTED]/msg130897.html I don't know if actually fixes the
problem though.
** Changed in: mp3rename (Ubuntu)
Status: New => Confirmed
--
mp3rename
I was able to reproduce the issue by adding "sudo" before my "gnome-
terminal" launcher as well. I was actually hoping I would not be able
to reproduce the issue :) The animation did not get stuck this time but
the keyboard became unresponsive again.
When I SSHed into the machine the sudo proces
Well, I saw the notification in the panel that some updates were
available. I noticed one of them was for gnome-panel (and other
packages). I thought "why not?" and installed them. I then tried to
reproduce the issue.
Having a sudo before the command in a launcher is no longer locking up
the X s
Yeah, still freezing up. So the problem is with sudo then?
--
adding "sudo" before command in launcher in gnome panel freezes X session
https://bugs.launchpad.net/bugs/253504
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bu
Can this be considered a papercut?
--
screensaver won't release with mouse movement
https://bugs.launchpad.net/bugs/273142
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://
*** This bug is a duplicate of bug 273142 ***
https://bugs.launchpad.net/bugs/273142
** This bug has been marked a duplicate of bug 273142
screensaver won't release with mouse movement
--
mouse movement doesnt stop screensaver
https://bugs.launchpad.net/bugs/320870
You received this bug n
Awe, oh well.
I'm not sure I am convinced it is hardware specific. People with
nvidia, ati, and intel drivers have all reported it in the comments.
I just did a quick test because it used to happen on my machine but
doesn't anymore. However, it's one of the first things my wife ran into
on the
"...how long to wait for the bug to arise?"
I did not measure it, but about a minute seems to consistently reproduce
the behavior for me using Pacman which, as you stated, is not a default
screensaver.
Regarding the hardware, could it be related to using a USB mouse vs. a
PS/2 mouse? I am using
Public bug reported:
I performed a clean install of Ubuntu 7.10.
I added a new user with non-administrator privileges, but I remained
logged in as an admin user.
I enabled restricted drivers for my NVIDIA video card and restarted the
computer. The video card is a GeForce4.
I logged in using th
This problem has been resolved by installing the xserver-xgl package.
However, if this is the normal solution, shouldn't this be installed as
a dependency?
--
No window decorations using compiz fusion after creating new user
https://bugs.launchpad.net/bugs/154596
You received this bug notificatio
Here's some more information. Installing xserver-xgl is not a permanent
solution. The window decorations disappear after switching users
multiple times. Running gnome-compiz-preferences seems to restore them,
but this is annoying.
--
No window decorations using compiz fusion after creating new
** Tags added: 8.04 hardy installer partman
--
Installer couldn't mount NTFS partitions.
https://bugs.launchpad.net/bugs/32178
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https
Hello,
I also experience this bug and found a work-around on the ubuntu forums.
If you try to mount it as a "top-level" location, it will not work.
However, mounting under another existing location worked.
For example:
setting mount to "/windows" did not work but setting mount to
"/media/windows
ilikeyoureyes, the screenshot is not the same issue I am experiencing.
In my case, there are no window decorations at all (not even a blank
border). I have done some more testing and it appears that the issue is
not actually related to creating a new user as I originally thought but
is actually tr
Pedro,
Thanks for getting back to me on this. I have since reverted back to
Ubuntu 6.06 LTS. I will attempt to reproduce this bug when I upgrade to
8.04 LTS.
--
No window decorations using compiz fusion after creating new user
https://bugs.launchpad.net/bugs/154596
You received this bug notifi
Can someone provide me with tips how I can move this bug along? What
other information is needed? I wouldn't want this bug showing up in
hardy heron.
--
No window decorations using compiz fusion after creating new user
https://bugs.launchpad.net/bugs/154596
You received this bug notification bec
Martin, you are right, it's not a time issue and I was also able to
consistently reproduce it when hitting the number '2' key (or @ key as
described in your bug) on my keyboard.
--
GDM logs out after some minutes of typing on the keyboard
https://bugs.launchpad.net/bugs/396226
You received this b
I also encountered this bug in Lucid. It appears to consistently happen
for me when hitting the number 2 key on the keyboard.
Moreover, when two monitors are connected, instead of my session ending
and getting returned to the login screen, both of my monitors shutoff
and the keyboard becomes unre
It may be the same bug. I had autologin enabled so it bypassed the
initial password prompt in my case.
--
Logged out when typing 2 or @
https://bugs.launchpad.net/bugs/522554
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bu
Public bug reported:
Binary package hint: nvidia-settings
For rotation testing of the NVIDIA proprietary drivers, the test case is
as follows:
Rotation
Case ID: xpr-004
1. Test rotation using xrandr --output $OUTPUT --rotate
Expected failure on -nvidia: use the nvidia GUI config tool for this i
** Attachment added: "BootDmesg.txt"
http://launchpadlibrarian.net/39747577/BootDmesg.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/39747578/Dependencies.txt
** Attachment added: "Lspci.txt"
http://launchpadlibrarian.net/39747579/Lspci.txt
** Attachment adde
** Summary changed:
- [Lucid Alpha] testing Fallback Jokey is unable to restore missing kernel
module
+ [Lucid Alpha] testing Fallback Jockey is unable to restore missing kernel
module
--
[Lucid Alpha] testing Fallback Jockey is unable to restore missing kernel module
https://bugs.launchpad.ne
** Changed in: nvidia-graphics-drivers (Ubuntu)
Status: New => Confirmed
--
Lucid upgrade broke nvidia proprietary drivers
https://bugs.launchpad.net/bugs/522328
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mail
Federico, you're English was correct. My interpretation of "Manual
Install" for this test scenario was...
1. Go to nvidia's website
2. Download their installation script for Linux graphics drivers
3. Stop X/gdm
4. Run their script
The expected results as defined in the test case did not match th
Federico, your* English was correct (apparently better than mine!)
--
Lucid upgrade broke nvidia proprietary drivers
https://bugs.launchpad.net/bugs/522328
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubun
Probably. I wasn't sure so I submitted this bug.
--
There is no way to rotate a display using nvidia proprietary drivers
https://bugs.launchpad.net/bugs/527428
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
Binary package hint: ubuntuone-client
I am using Ubuntu 9.10 - the Karmic Koala - released on A Packard bell
desktop with 2 X intel pentium D 2.80 GHZ , 2.0GB memory, 160 HD.
I expected when I click on the connect icon on the ubuntu one folder to
connect to my online accoun
** Attachment added: ".home.ramon..cache.ubuntuone.log.oauth.login.log.txt"
http://launchpadlibrarian.net/36794861/.home.ramon..cache.ubuntuone.log.oauth.login.log.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/36794862/Dependencies.txt
** Attachment added: "Ubu
I have this exact same behavior from both the 3-10 and 3-12 images
Is this a duplicate of #531027?
** Changed in: linux (Ubuntu)
Status: New => Confirmed
--
Lucid LiveCD crashes on boot attempt, displays error messages, no input possible
https://bugs.launchpad.net/bugs/538310
You receive
Confirming. I just did a vanilla install 8.04, performed all updates,
then upgraded using update-manager -d. Was prompted to replace custom
configuration file that I did not modify.
** Changed in: apport (Ubuntu)
Status: New => Confirmed
--
[8.04 -> 10.04 a3] Configuration prompt reques
After clicking Close on the error message, many other xserver-xorg-
video-* packages also fail to install/upgrade.
--
[upgrade 8.06 -> 10.04 a3] package xserver-xorg-video-rendition 1:4.2.3-1
failed to install/upgrade: problèmes de dépendances - laissé non configuré
https://bugs.launchpad.net/bu
I was doing some testing of lucid today for the nvidia prop. drivers and
am getting behavior that sounds the same as this bug. How can I verify
it's the same issue?
--
GDM logs out after some minutes of typing on the keyboard
https://bugs.launchpad.net/bugs/396226
You received this bug notificat
With a single monitor connected, the behavior is as described in this
bug.
With two monitors connected, instead of going into power saving mode, my
monitors remains active. However, after a few minutes, the splash
screen animation freezes and I never get to the installation screen.
This was with
Public bug reported:
Binary package hint: gnome-control-center
This is probably filed against the wrong package but I don't know which
one is correct.
When I set the compose key to 'right CTRL' using gnome-keyboard-
properties and then try to use a virtual machine in VirtualBox OSE, I am
unable
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/40711625/Dependencies.txt
--
Setting compose key as 'right CTRL' traps cursor in VirtualBox
https://bugs.launchpad.net/bugs/536832
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscri
I tested with the 3/10 image and it no longer turns off the monitor or
freezes at the splash screen. I am still frozen at this screen though:
https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/531027
--
Lucid Alpha3 live cd failing to boot properly, monitor powers off during boot.
https:
To be clear, when my compose key is something other than right CTRL then
VirtualBox correctly releases the mouse when hitting right CTRL.
--
Setting compose key as 'right CTRL' traps cursor in VirtualBox
https://bugs.launchpad.net/bugs/536832
You received this bug notification because you are a m
Unlike the bug reporter, I never get to the gdm login screen. They
keyboard is not responsive. Every two minutes I get the messages in the
attached screenshot.
** Attachment added: "Screenshot of messages received during lucid boot"
http://launchpadlibrarian.net/40751310/lucid-03-10-boot-free
Public bug reported:
Binary package hint: brasero
On Ubuntu 9.04 while making a standard audio CD, I dragged and dropped a
song from my Music Library in Banshee to the Audio Disc Project window
in Brasero hoping it would add it to the project like Rhythmbox does.
Instead Brasero crashed with a se
*** This bug is a duplicate of bug 424377 ***
https://bugs.launchpad.net/bugs/424377
** This bug has been marked a duplicate of bug 424377
drag and drop from banshee to brasero causes segmentation fault
--
drag and drop from banshee to brasero causes segmentation fault
https://bugs.launch
I confirmed I have a profile selected and have tried all available input
devices.
It turns out this bug
https://bugs.launchpad.net/ubuntu/+source/checkbox/+bug/459606 was
affecting my tests results. The scripts to record audio were not
actually being executed. The scripts run now, but they never
The fix for
https://bugs.launchpad.net/ubuntu/+source/checkbox/+bug/459606 fixed
this for me.
--
[karmic] Checkbox gives no results for disk_bench
https://bugs.launchpad.net/bugs/420868
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Fixed by https://bugs.launchpad.net/ubuntu/+source/checkbox/+bug/459606
I believe.
--
Switching test to virtual terminal does not work
https://bugs.launchpad.net/bugs/425178
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
In Karmic, it doesn't crash, but it doesn't add the file to the project
either.
--
drag and drop from banshee to brasero causes segmentation fault
https://bugs.launchpad.net/bugs/424377
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Way ahead of you :)
https://bugzilla.gnome.org/show_bug.cgi?id=588323#c4
--
drag and drop from banshee to brasero causes segmentation fault
https://bugs.launchpad.net/bugs/424377
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubunt
Philippe has fixed the bug upstream.
--
drag and drop from banshee to brasero causes segmentation fault
https://bugs.launchpad.net/bugs/424377
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists
This is at 200% zoom level. The error is only visible after moving the
icon. Drawing a selection box over the icon fixes the emblem.
** Attachment added: "bad_emblem_zoomed.png"
http://launchpadlibrarian.net/35124784/bad_emblem_zoomed.png
--
Emblems get cut when scaled to a zoom >= 150% (re
Wow, you must be right. I can no longer reproduce the issue on 9.04 and
both files play fine now. Weird.
--
mp3 file converted to wav format produces garbled output
https://bugs.launchpad.net/bugs/306599
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
** Changed in: linux (Ubuntu)
Status: New => Confirmed
--
[Acer, inc. Aspire 5050] suspend/resume failure
https://bugs.launchpad.net/bugs/423934
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-b
Public bug reported:
While running through "System Testing", none of the microphone tests
worked. When I hooked up a headset, I could hear sounds through the
headphones but could not hear my voice played back after hitting the
"Test" button.
ProblemType: Bug
Architecture: i386
AudioDevicesInUse:
** Attachment added: "AlsaDevices.txt"
http://launchpadlibrarian.net/34300595/AlsaDevices.txt
** Attachment added: "AplayDevices.txt"
http://launchpadlibrarian.net/34300596/AplayDevices.txt
** Attachment added: "ArecordDevices.txt"
http://launchpadlibrarian.net/34300597/ArecordDevices.t
I don't know if this is the same bug, but I noticed that the
disk_bench_test script did not have execute permissions on it. When I
added it, the test ran successfully and displayed results.
--
[karmic] Checkbox gives no results for disk_bench
https://bugs.launchpad.net/bugs/420868
You received t
Same happens to me plus that I want to install a local(USB) printer but ubuntu
only shows network printers which are added automatically and doesn't show usb
printers connected locally..
Ubuntu use to be very good before with printing. but it's all messed up since
the last 3 upgrades I'm having
75 matches
Mail list logo
