daponz did you try my weird method ?
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/210725/comments/87
@ martin : I use Kubuntu Intrepid (KDE4) with knetworkmanager, fresh
install with Stephane's ppa driver, nothing more. My router is WPA-PSK
(AES I try to remember). I can't try WPA2 since
The Stephane's driver does not work properly with WPA. I looked at
/usr/src/rt.../RT2860STA.dat, and I saw that the driver seems to have been
compiled for open authentication ? I'm not expert so don' t blame me if I'm
wrong. I wanted to recompile it with correct parameters, but I do not know ho
New driver version :
[1.8.0.0]
1. Fixed compile error when CARRIER_DETECTION_SUPPORT is enabled.
2. Add "iwpriv ra0 set CarrierDetect=0(or 1)"
3. Add new WSC hardware push button function
4. Add Ad-Hoc to support N rate.
5. Migrate Mesh supporting to Draft-2
I hope that ubuntu team will make a new dkms driver, since WPA does not
work for me. (With no encryption it is ok.)
--
Please include RaLink RT2860 driver
https://bugs.launchpad.net/bugs/210725
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubun
Hmm, I really got the feeling that hardwares don't work in the same way.
I use an EEEPC901, and 1.8.0.0 has the same issue than Stephane's package : I
see access points, but no connection is achieved, it seems to fail when WPA
protocol comes.
So I think we should indicate in each post the hardwar
I've just installed new Stephane's driver, but NetworkManager even dont see it.
(eeepc 901)
iwconfig seems ok...
I'll try wicd.
--
Please include RaLink RT2860 driver
https://bugs.launchpad.net/bugs/210725
You received this bug notification because you are a member of Ubuntu
Bugs, which is subsc
yop, wicd does see the wifi AP, but connection fails. I try to get dbg msg.
For NM, still nothing appears, though iwconfig is ok.
--
Please include RaLink RT2860 driver
https://bugs.launchpad.net/bugs/210725
You received this bug notification because you are a member of Ubuntu
Bugs, which is subs
mmmh, it seems that the config.mk is strange, N for wpasupplicant
support. Maybe i'm wrong, but it was not the way we did compile the
driver last time ?
--
Please include RaLink RT2860 driver
https://bugs.launchpad.net/bugs/210725
You received this bug notification because you are a member of Ubu
Still cannot connect with my WPA access point.
I use eeepc901 and wicd (which does show ra0).
--
Please include RaLink RT2860 driver
https://bugs.launchpad.net/bugs/210725
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs m
With today's intrepid upgrade to 2.6.27-6, driver was broken, no wifi
available. Reinstallation solved the issue, but I don't think it's normal since
the driver is designed to be automatically installed when a new kernel is
available ?
I reinstalled networkmanager, which does see the wifi AP, bu
Youhouu !!
I managed a success for wpa-eeepc901 :
- use knetworkmanager as usual
- install the last Stephane's driver
- configure a new ra0 WPA connection with Expert Settings
- select Use Specific Cipher and un-select CCMPs
- click Connect and Save
- it fails
- edit this new connection
-
Public bug reported:
Edgy CD does not boot on my Toshiba U200-163, celeron duo 2300.
Few lines and freeze, with fan acceleration. Physical turn-off needed.
Talking about BIOS bug... Version 6.06 is working properly on the same
laptop. CD 6.10 is ok on my Fujitsu Amilo.
** Affects: Ubuntu
Im
** Description changed:
- Edgy CD does not boot on my Toshiba U200-163, celeron duo 2300.
+ Edgy CD does not boot after startup menu on my Toshiba U200-163, celeron duo
2300.
Few lines and freeze, with fan acceleration. Physical turn-off needed.
Talking about BIOS bug... Version 6.06 is wo
shutdown grey blocks issue solved for me too (intel 945)
Great !
--
laptop hangs when switching video mode
https://bugs.launchpad.net/bugs/127101
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-b
[Toshiba U200, intel gma 945, kubuntu gutsy up-to-date]
I get the issue (dark screen with grey squares) on my kubuntu gutsy (new
install), as i did in feisty.
And I get more often this issue than in feisty (see last paragraph for
explanation...) !
Notice that one time I got the same issue with c
Public bug reported:
hi,
since Edgy my Toshiba U200 (intel 945 video) crashes randomly on
shutdown as follows :
- power button or shutdown from K menu
- black screen
- black screen with grey squares at some places of the screen
- a few seconds
- fan speeds up up up
- hard-reset needed
My feelin
(my Gutsy is a new install, not an upgrade.)
--
[Gutsy] Toshiba U200 random crashes on shutdown
https://bugs.launchpad.net/bugs/150943
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.u
ok thanks i'll look at it and i'll tell you !
--
Cannot shutdown computer with Kubuntu Feisty
https://bugs.launchpad.net/bugs/105102
You received this bug notification because you are a member of Kubuntu
Team, which is a bug contact for kubuntu-default-settings in ubuntu.
--
kubuntu-bugs mailin
i still get the issue...
It is strange that, leaving KDE, there's everytime a dark screen, then some
seconds pass (that is not normal i think), and there i get 2 possibilities :
normal shutdown (or deconnexion, or X-restart) or dark screen with grey squares.
--
Cannot shutdown computer with Kub
i still get the strange "turned off twice" behaviour, but the initial issue is
OK since ubuntu9 version of the intel driver.
Shutdown is successful everytime now for me.
--
[Gutsy] Toshiba U200 random crashes on shutdown
https://bugs.launchpad.net/bugs/150943
You received this bug notification b
Public bug reported:
Hi,
When I do "sudo dpkg-reconfigure -phigh xserver-xorg " the new xorg.conf
contains no information about my screen. When I look at the driver
automatically selected, I find "i810".
So I change the driver to "intel" in System Preferences from Kubuntu, but my
xorg.conf con
I'm on Hardy up-to-date.
--
select driver "intel" causes wrong resolution
https://bugs.launchpad.net/bugs/219270
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubun
Public bug reported:
[Toshiba U200, Hardy, Intel 945, Intel 3945]
Hi,
My autonomy is very low ~45min (with wifi switched off). It seems that the
power consumption is ~13500mW with low screen backlight.
I got ~1h45 with Gutsy several months ago.
Switching to Windows XP shows me that battery sta
Oh ! sorry, I'm now on Hardy, and this bug has been fixed since a long time
(Gutsy or Hardy).
No special issues with my X server now. (Just : the game is slower than in
Windows XP, quite strange.)
Sorry again.
--
X dark display with games
https://bugs.launchpad.net/bugs/92848
You received this
Public bug reported:
Hi,
My TI SD card reader still does not work (Hardy, Toshiba U200) : lsusb
gives nothing. I know that there are some other bugs like that, but it's
quite annoying that this card reader WAS working on Edgy, and a lot of
us are disappointed of this regression since Feisty.
Tha
Public bug reported:
[Hardy]
Hi,
The KDE fonts are not applied in my GTK (?, I'm not an expert) softwares like
Firefox or Adept : appearance is bad.
The same problem appears in KDE4.
Thanks
** Affects: ubuntu
Importance: Undecided
Status: New
--
gtk software (eg Firefox) appea
I comfirm that on Toshiba U200 - Hardy : no multimedia keys are working, no
controls are working (eg brightness).
All was ok last october on Gutsy.
--
Multimedia keyboard keys only partially work
https://bugs.launchpad.net/bugs/31215
You received this bug notification because you are a member of
Public bug reported:
[Hardy]
Hi,
When I move the sound control of my Toshiba U200 laptop, the sound level varies
from 0% to 4%. Moreover, when I put up the volume, the microphone gets on ;
when I put down the volume, the microphone gets off.
The mute action doesn't work ; the master channel se
I confirm this bug on Hardy, 2.6.24-5, Toshiba U200.
I found that turning off the wifi switch solves the problem (at work I uses
wired ethernet).
BUT when the switch is off during boot, I cannot turn it on with any effect
after the boot...
--
intel_rng: FWH not detected
https://bugs.launchpad.
all that is obsolete, updates solved it !
--
[Gutsy] Toshiba U200 random crashes on shutdown
https://bugs.launchpad.net/bugs/150943
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
no more issue since recent updates.
--
kmix don't work with the sound control button
https://bugs.launchpad.net/bugs/186113
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:/
here !
** Attachment added: "dmesg.log"
http://launchpadlibrarian.net/12683802/dmesg.log
--
SD card reader does not work
https://bugs.launchpad.net/bugs/186115
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing l
Linux ~ 2.6.24-12-generic #1 SMP Wed Mar 12 23:01:54 UTC 2008 i686 GNU/Linux
Ubuntu 2.6.24-12.22-generic
Thanks
--
SD card reader does not work
https://bugs.launchpad.net/bugs/186115
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
u
yes but with gksudo ! On kubuntu I had to change it to kdesudo.
--
Provide likewise-open-gui and likewise-open binaries rather than domainjoin-gui
and domainjoin-cli
https://bugs.launchpad.net/bugs/196778
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
here they are !
Thanks !
** Attachment added: "lspci.log"
http://launchpadlibrarian.net/12619430/lspci.log
--
SD card reader does not work
https://bugs.launchpad.net/bugs/186115
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
u
oups...
** Attachment added: "dmesg.log"
http://launchpadlibrarian.net/12619431/dmesg.log
--
SD card reader does not work
https://bugs.launchpad.net/bugs/186115
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
Public bug reported:
Binary package hint: firefox-3.0
Only since the new beta 4 my Firefox (on Hardy) crashes everytime i do :
1- go on Yahoo mail (the new one)
2- read a message and delete it
3- new tab to kubuntu-fr.org (e.g. ;-) )
It seems to be a Java issue ?
The console shows "Core dumpe
I could do that, but I did that during my searches to solve this issue.
The dmesg shows absolutely nothing : nobody in my Ubuntu knows that my Toshiba
owns a SD reader...
I was told that there was a patch at Mandriva :
http://svn.mandriva.com/cgi-bin/viewvc.cgi/packages/updates/2008.0/kernel-2.6/
OK for the FPS increase, but see how Sauerbraten looks after
intel_batch=1, there are bugs in ammo and health amount display.
--
INTEL_BATCH=1 should be enabled per default for Intel graphic hardware
https://bugs.launchpad.net/bugs/195843
You received this bug notification because you are a membe
** Attachment added: "xorg.conf.4"
http://launchpadlibrarian.net/12806363/xorg.conf.4
--
[Hardy beta] Xorg fails to configure an usable xorg.conf
https://bugs.launchpad.net/bugs/205045
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
Binary package hint: xserver-xorg
Hi,
Toshiba U200, intel 945, driver "intel", Kubuntu Hardy beta last
updates.
When I did a "dpkg-reconfigure -phigh etc...", my xorg.conf became wrong (see
attachment).
When rebooting, it fails to initialize.
I replaced it with an old xorg
** Also affects: linux-source-2.6.24 (Ubuntu)
Importance: Undecided
Status: New
--
intel_rng: FWH not detected
https://bugs.launchpad.net/bugs/102982
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
Hi,
[Hardy up-to-date, Sun Java 6 installed]
When installing Iced Tea (proposed in Adept without any special action), I was
not asked for a choice between Sun Java and Iced Tea.
(Some softwares do experience issues with IT... GeoGebra e.g.)
So I uninstalled ITea, and again
Hi,
1) when Iced Tea was being installed I was not asked for the default
Java VM tu use, and Iced Tea was my new Java VM without giving me the
choice
2) when I uninstalled Iced Tea the only Java VM remaining (Sun Java) was
not set as default Java VM, I had to do it myself in konsole as no Java
VM
Public bug reported:
The multiformat card reader don't work, nothing with lsusb.
It was working properly on Edgy.
[Toshiba, kernel 2.6.20-15]
** Affects: Ubuntu
Importance: Undecided
Status: Unconfirmed
--
SD card reader don't work on Toshiba laptop
https://bugs.launchpad.net/bugs
Public bug reported:
Binary package hint: kaffeine
the size of a screen-fitted video on Kaffeine-Xine (Feisty) is not correct. VLC
is working ok so it's maybe a kaffeine bug.
It seems to appear only with the xserver-xorg-driver-inteln not the -i810 one.
(video intel 945GM)
** Affects: kaffeine
Public bug reported:
When I resume my previous session with KNM activated and wifi-connected, I get
sometimes "DCopServer is asking to open KWalletManager..." or the same with
"kdm" ; it never works is these cases.
(The good one is "KNetworkManager wants to open etc...")
I have in bad cases to r
Public bug reported:
On Sauerbraten (Cube 2), Feisty display (with sometimes small bugs) is darker
than Edgy's one.
The same problem seems to appear with TC:Elite.
[graphics : intel 945]
** Affects: Ubuntu
Importance: Undecided
Status: Unconfirmed
--
X dark display with games
htt
Public bug reported:
[Kubuntu]
When I shutdown my Toshiba laptop with the dedicated button (on the computer),
I get some odd things. It does everytime work (poweroff), but in between I get
truncated usplash screen, or a screen filled xith euro symbol, etc...
I did have the same behaviour on Edgy
Public bug reported:
[Kubuntu]
The green power applet show the 2 cpu frequencies with correct numbers, but the
blue bars don't move at all and stay at minimal position.
** Affects: Ubuntu
Importance: Undecided
Status: Unconfirmed
--
[Feisty] Power applet don't show CPU bars
https
I run Feisty for 2 weeks, and I got the same problem (here KNM does have
a startup launching option), but it happens much less often.
--
KNetworkManager sometimes fails when resume session
https://launchpad.net/bugs/85289
--
kubuntu-bugs mailing list
kubuntu-bugs@lists.ubuntu.com
https://lists.
Public bug reported:
When I resume my previous session with KNM activated and wifi-connected, I get
sometimes "DCopServer is asking to open KWalletManager..." or the same with
"kdm" ; it never works is these cases.
(The good one is "KNetworkManager wants to open etc...")
I have in bad cases to r
Public bug reported:
Binary package hint: kcm-touchpad
I use kcm-touchpad to turn off touchpad (because I get a trackpoint, not
supported by kcm-touchpad, argh !).
When I return from ram-suspend, my touchpad is NOT turned off (my personal
script to emulate the mouse wheel via some xinput comman
Public bug reported:
Binary package hint: acroread
When I have to read more than 1 pdf (not only at the same time in
different tabs) with the adobe reader acroread firefox plugin, I get
some strange screens (white, black or anything non-readable).
In Konsole (sorry for error logs length, I'm not
Ok Sébastien, I confirm it works well too in my Focal.
Please consider another TB snap send-to bug here:
https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/1898206
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.l
Note that I cannot open attachments in a compose window. Nothing happens
(because confinement/apparmor, as far as I can see in Logs).
That's very annoying to check I send the good files.
The url of the attachment begins with file:///run/user/1000...
If I choose to send a file through Nautilus rig
No it's only another attachment handling bug, but you showed it is not related.
The original bug stands still.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1898206
Title:
Thunderbird snap 78.3.1 ex
** Tags removed: verification-needed-focal
** Tags added: verification-done-focal
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1904859
Title:
[snap] cannot send file from Nautilus
To manage notifi
I agree but the link to Discourse given in bug description does show a
typical part of this issue.
** Summary changed:
- Thunderbird snap 78.3.1 experiences some oddities to open attachment
+ [snap] Issues associating attachments with default apps
--
You received this bug notification because
Another concern:
https://github.com/kewisch/gdata-provider/issues
this very common addon that manages Google Calendar does not always show Google
calendars at TB startup. It's not snap nor Ubuntu nor Linux related. There are
numerous similar bug reports.
Another one with task creation:
https://gi
Same here, very annoying through my usage.
20.04 GNOME session
GS 3.34
Wayland
Intel iGPU
kernel 5.8 hwe
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1878247
Title:
CTRL-Shift-PrntScreen screensho
GS 3.36.4 sorry...
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1878247
Title:
CTRL-Shift-PrntScreen screenshots sometimes don't work
To manage notifications about this bug go to:
https://bugs.lau
Public bug reported:
Hi,
Thunderbird snap & deb are displayed separately in Snap Store.
This does not help beginners to find out which version has to be
installed. Additionally we should briefly explain, in Snap Store
description, the differences between these two packages.
** Affects: thunderb
Focal up to date.
apt policy nautilus-sendto
nautilus-sendto:
Installé : 3.8.6-3ubuntu0.20.04.1
Candidat : 3.8.6-3ubuntu0.20.04.1
Table de version :
*** 3.8.6-3ubuntu0.20.04.1 500
500 http://archive.ubuntu.com/ubuntu focal-proposed/main amd64 Packages
100 /var/lib/dpkg/status
Well, I do still experience this bug. I was too optimistic, because it
happens less often than some time ago.
snapd 2.48.3 in Focal
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1873550
Title:
Snap
FYI I still do experience this bug with latest 1030 kernel oem.
No issue running 5.8 hwe or 5.11 hwe.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1926597
Title:
Linux 5.10.0-1024.25 breaks HDMI wi
Public bug reported:
(Was the same before v. 78.11.)
TB does not play a sound when a new mail incomes, even if the correct option is
selected.
Changing from default to custom sound does not change the issue.
New emails notifications do work as intended, except sound.
** Affects: thunderbird (U
Firefox snap gets this one, TB snap does not:
pulseaudiofirefox:pulseaudio :pulseaudio
-
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1930887
Title:
[snap] Thunderbird
I can select a custom sound from /usr/share/sounds, I don't get a deny
of access.
Enter snap name: thunderbird
Available connections:
Interface Connecteur Prise
Notes
audio-playbackthunderbird:audio-playback :audio-playba
I can confirm it works (TB 78.11 snap, Debian 11) with default sound.
I can select a custom sound and it works too (displayed location:
file:///run/user/1000/[etc.]).
Great, thanks!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
htt
(Yes!)
I now do use a Debian 11 system:
Linux fthx 5.10.0-7-amd64 #1 SMP Debian 5.10.40-1 (2021-05-28) x86_64 GNU/Linux
and hdmi works as intended, FYI.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/19
Hi,
[Focal, Thinkpad T480s, 8550u/intel igpu]
Unfortunately I suspect this:
* Fix no picture from HDMI when it's plugged after boot (LP: #1924238)
- drm/i915/display: Handle lane polarity for DDI port
in *-1024 OEM 5.10 kernel, that I do use in Focal, did break HDMI hotplug after
GNOME is
Previous one: *-1023
I'm sure of that because I use HDMI every day, at work or at home. And I
checked my apt/Synaptic's history. Nothing else was updated this day
apart kernels. I updated GS and Mutter to 3.36.9 *way after* having
experienced the issue for the first time.
And kernel 5.8 hwe is wo
Public bug reported:
Hi,
[Thinkpad T480s, Intel iGPU 8550u, Ubuntu Focal up-to-date, GNOME
Wayland session]
Previous 5.10.0-1023.24 was ok. Kernel 5.8 HWE is ok. I did not test a X
session.
Plugging HDMI after GNOME is loaded fails to display anything on the HDMI
display.
Plugging HDMI at boot
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1926597
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1924238
Title:
Fix no picture from HDMI when it's plugged after boot
To manage notificatio
I cannot install this 5.12 kernel because dependencies issue against
libc6 (>2.33 needed).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1926597
Title:
Linux 5.10.0-1024.25 breaks HDMI with Intel i9
This one did not fix the issue.
(Booting again with 5.8 hwe kernel, I can still confirm that there is no
issue, as 5.10 < *-1024.)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1926597
Title:
Linux
Unfortunately, I never compiled any kernel and don't know how to do it.
There's one thing I don't understand here: why hdmi does work in gnome
after having connected it *before* login in gdm?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ub
Additionally:
1) boot without hdmi plugged
2) login to gnome session
3) plug in hdmi, nothing happens (but my monitor seems to detect something few
seconds but stays black)
4) enter laptop sleep
5) resume from sleep
6) hdmi monitor works as intended
--
You received this bug notification because
I don't have the time to compile kernels, at the moment.
But I tried latest CKT hwe kernel:
Linux 5.11.0-16-generic #17~20.04.5-Ubuntu SMP Tue Apr 27 07:37:47 UTC 2021
x86_64 x86_64 x86_64 GNU/Linux
And hdmi is working like a charm.
--
You received this bug notification because you are a member
Still happens, Focal.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1861558
Title:
Snap 'ed applicaitons have garbage on top of the window Close [x]
button
To manage notifications about this bug
Seems to be Wayland related, from other sources.
(I did not test it in X, though.)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1861558
Title:
Snap 'ed applicaitons have garbage on top of the windo
Public bug reported:
TB 78.5.0 snap
Focal
Nothing happens when I right-click on a file (using Nautilus) from my
home and choose 'send to'. I did not have such a problem using TB deb.
** Affects: thunderbird (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notif
Public bug reported:
Randomly and often GNOME-Shell crashes when resuming from sleep.
Upstream bug report :
https://gitlab.gnome.org/GNOME/mutter/issues/509
The fix already exists :
https://gitlab.gnome.org/jadahl/mutter/commit/5174b9e105a78730f2f09be920bf56e3ef0c3776
** Affects: mutter
Imp
merge request (still being worked) :
https://gitlab.gnome.org/GNOME/mutter/merge_requests/506
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1822373
Title:
[Disco] crash when resuming from sleep
To
I'm affected too (Ubuntu focal, kernel 5.4).
I found a simple workaround here using thermald :
https://forums.lenovo.com/t5/Other-Linux-Discussions/X1C6-T480s-low-cTDP-and-trip-temperature-in-Linux/m-p/4637873#M14378
helped from here :
https://github.com/intel/thermal_daemon/issues/215
It's just a
Note this is fixed now in Focal, since colorama 0.4 upload in december.
** Tags removed: focal
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1856215
Title:
Numba 0.42 needs Colorama >= 0.3.9
To ma
Public bug reported:
Focal up to date
python3-numba 0.42.0-1build1
python3-colorama 0.3.7-1
Spyder says :
runfile('my_script.py', wdir='my_folder')
/usr/lib/python3/dist-packages/numba/errors.py:104: UserWarning: Insufficiently
recent colorama version found. Numba requires colorama >= 0.3.9
w
Already reported upstream :
https://gitlab.gnome.org/GNOME/mutter/-/issues/1138
** Bug watch added: gitlab.gnome.org/GNOME/mutter/-/issues #1138
https://gitlab.gnome.org/GNOME/mutter/-/issues/1138
** Also affects: mutter via
https://gitlab.gnome.org/GNOME/mutter/-/issues/1138
Importance:
Public bug reported:
Running :
Ubuntu GNOME session 20.04 up to date
GNOME Shell + Mutter 3.35.91
Wayland session
French language configuration (fr in kb config files)
AZERTY keyboard
Upgrading from 2.26-2ubuntu4 to 2.29-1 caused my French AZERTY keyboard to be
QWERTY.
If I run :
setxkbmap fr
in
Seems clearly related to this one :
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=952731
** Also affects: xkeyboard-config via
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=952731
Importance: Unknown
Status: Unknown
--
You received this bug notification because you are a mem
Following above Timo Aaltonen's statement, we have to upgrade to 7.7+5:
https://packages.debian.org/fr/sid/x11-xkb-utils
too.
Tested and approved !
** Changed in: xkeyboard-config (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
B
I confirm a power usage issue.
Dell 7510 (too !)
Ubuntu (GNOME) 18.04
Nvidia M1000M
I found that the file :
/etc/modprobe.d/blacklist-nvidia.conf
is not removed by prime when switching to Nvidia, so the module cannot be
loaded (as far I understand the stuff). When I remove it and load with Nvidia
Running Quadro M1000M, no crash running Nouveau (just poor perf as
everybody)
Well, if I select intel through prime, the line nouveau.run-pm=0 is put in
kernel parameters in grub. I've excluded nvidia & nouveau from runtime pm in
tlp, to not interfere here.
The result is that I get 15 W power us
Definitely not TLP-related since I experience the same difference
without TLP installed.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1765363
Title:
prime-select intel is not powering off the nvidi
Public bug reported:
pyqt5 and python3-qtpy are installed but :
Traceback (most recent call last):
File "/usr/bin/spyder3", line 6, in
from pkg_resources import load_entry_point
File "/usr/lib/python3/dist-packages/pkg_resources/__init__.py", line 3147,
in
@_call_aside
File "/usr
Public bug reported:
I run Firefox 60 in Ubuntu 18.04 without window title bar (new option).
The extra space option to grab the window does not change anything.
There is no issue with Adwaita or Communitheme. In Ambiance (see
screenshot), there is a rather big vertical padding above the tabs ;
th
** Attachment added: "Communitheme"
https://bugs.launchpad.net/ubuntu/+source/light-themes/+bug/1770931/+attachment/5138676/+files/Capture%20d%E2%80%99%C3%A9cran%20de%202018-05-13%2010-53-58.png
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Please note that
RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
is TLP's default (happens too if the line is commented), so if you don't want
to blacklist any driver you have to set
RUNTIME_PM_DRIVER_BLACKLIST=""
as TLP config file's comments warn us about this trick.
--
You receive
Checked and approved running my HP laptop too.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1745816
Title:
[Bionic] 1.9.4-2ubuntu1 makes touchpad jumpy on Dell Precision 7510
and HP 450 G3
To ma
1 - 100 of 473 matches
Mail list logo
