Michael wrote:
> I wonder if it's a typo?
And I wonder if you've read the page you posted? :-D
Just kidding.
No, not kidding... It says the *build* requires 1.4, 1.5 AND 1.6. I don't know
why, but that's what it says.
Further down ("known limitations"), it says: "For the platforms were JDK 1.6
s
Hi, attached the lshal for HP pavillion tx2120us
Ubuntu 9.04
Kernel 2.6.28-14-generic
** Attachment added: "evtouch_hal.out"
http://launchpadlibrarian.net/29664079/evtouch_hal.out
--
evtouch meta bug to collect lshal info
https://bugs.launchpad.net/bugs/317094
You received this bug notificat
Problem (crash) still exists in latest Release Candidate *** 64 BIT ***
Yes, maybe that's the news here. I just tested Eclipse 3.3 (and even 3.4 M6) in
a Virtual Machine (32 bit) and it worked fine. That had me hoping...
I then tested my "real machine" (64 bit) again and there is no change - Ecli
@Ashton: "If you need ... Eclipse, use Fedora":
Well, thanks for the hint, but *you can't be serious*! As far as I'm
concerned, Fedora is a completely different OS than Ubuntu and (for me
at least) just as much of a difference as, let's say, MacOS would be...
Having to switch the OS to make someth
that's ok, the crash was not reproducible anyway... just wanted to help in
debugging Hardy, you never know what the "collected data" is good for :-)
I'm updating frequently now just to be sure all my crashes occur with the
latest versions *g*
--
nautilus crashed when displaying folder propertie
HARDY, latest beta:
1) Having Eclipse 3.3 in the repos would be "nice", but I think
unpacking it myself is "acceptable" (but not so nice...).
2) For me, this doesn't work. I (probably) have the same problem as Ілля
Романенко above
(https://bugs.launchpad.net/ubuntu/+source/eclipse/+bug/123064/c
same here. I just installed a Samsung CLX-2160 and I don't know if the
scanner driver is working properly. HOWEVER, when I start xsane as root
(as mentioned in a different report), it does *not* crash. Instead, it
reports "no scanner found". That may be a problem with the driver or
with xsane, I'm
I have the exact same experience klaxian does on comment #63 - it's when
I'm pushing a lot of data or just have a lot of connections in general.
Dell m1330 w/updated Jaunty, card is intell 4965 - did not happen with
intrepid. Error in dmesg;
[245265.239792] phy0: failed to restore operational cha
This bug also effects Toshiba A215 series laptops.
Jens Janssen's work around of running at 1.6ghz or higher CPU clock also
can be confirmed. So it would seem to be an issue with memory timing at
the lower clock frequency since the x1250 uses system ram instead of
dedicated.
I am willing to test
You may want to try entering some boot options to get around this. At
the Live CD menu screen, press F6. Then type in:
acpi=off noapic nolapic
There are other boot options to try, see here:
https://help.ubuntu.com/community/BootOptions
If this doesn't work, you should provide details of your ha
I tried July 10th, snapshot and found that it still flickers on the Toshiba
A215. It does seem improved and the most obvious flicker seems to occur
when there is a progress dialog, such as on Firefox download window.
Mark
On Wed, Jun 10, 2009 at 10:34 AM, bwashed
wrote:
> Onakas link is specif
With my i845, I lost direct rendering after upgrading to Edgy. My
desktop resolution is 1280x1024, but I was able to solve my problem by
removing "1600x1200" from the resolution lines in my xorg.conf. It seems
possible that if it can't get direct rendering in the highest
resolution, it won't try in
Public bug reported:
Binary package hint: gnome-utils
I pressed the printscreen key, saved a screenshot, and after the
screenshot was saved, it crashed and a Bug Buddy window popped up. It
happened once, and could not be reproduced on 14 subsequent attempts.
Bug Buddy output:
Memory status: size
Known bug since 2001: http://bugs.xmms.org/show_bug.cgi?id=149
The equalizer only supports mp3's.
--
Equalizer not working
https://launchpad.net/bugs/44023
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Thanks for taking the time to report this bug and helping to make Ubuntu better.
This could be a problem with the servers getting overloaded. Could you try it
again? You might also want to check you are connecting to the best server:
In System/Admin/Software Sources, in the drop down beside "Dow
I think I've experienced this since Dapper on my 2400.
usplash was working fine in previous releases going back to Warty.
Perhaps worse is that the default text mode has become 40x25 with the
bottom half cut off instead of the normal 80x25, if I press ctrl-alt-f1
to get to a text login.
--
Dell
Open /usr/share/applications/mplayer.desktop
change "Exec=gmplayer %U" to "Exec=gmplayer %f"
That'll make it pass mplayer the local path rather than constructing a url.
--
gmplayer fails to play a file whose filename contains spaces
https://bugs.launchpad.net/bugs/164709
You received this bug no
Debian bug #449298 posted on November 4th:
http://lists.alioth.debian.org/pipermail/pkg-gnome-maintainers/2007-November/039535.html
A reply with the fix was posted 11 hours later.
This is dated November 16th:
http://patches.ubuntu.com/by-release/extracted/debian/m/mplayer/1.0~rc2-6/24mplayer.deskt
It looks like mplayer depends on their own fork of libdvdnav:
http://svn.mplayerhq.hu/dvdnav/trunk/libdvdnav/
Theirs differs significantly from the one in Gutsy (presumably from
http://sourceforge.net/projects/dvd/, last updated in 2004).
--
dvdnav not supported by mplayer-nogui
https://bugs.lau
Not sure why this was changed to "Fix Released". There was never a fix.
--
Equalizer not working
https://launchpad.net/bugs/44023
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
If I install python 2.4, download the upstream Democracy Player 0.9.5.1
deb, modify its dependencies to install on feisty, comment out the
crashing portions of "onetime.py", and remove MozillaBrowser references
from "frontend.py" and "frontend_implementation/HTMLDisplay.py", I can
get it to start u
Public bug reported:
When gnome checks a file's type, it looks at the file extension and also
sniffs the file. If both methods yield different results, which is
probably half the time, it'll refuse to open the file.
For example, I double clicked a .planner file, and instead of opening it, it
war
I would have accepted it if I could. In my case the only symptom was
that the installation had frozen with zero cpu or io activity, and I had
to kill something to resume it (it's been a year so I don't remember
details), and I got that problem. Then hours later, as I was shutting
the computer down,
I get this too on Lucid. I tried to give Empathy a week because it's the
default, but it's unusable without notifications.
Someone could be trying to talk to me for hours, and I'd have little way
of knowing. I don't find out until I manually bring the contact list to
the foreground and notice the
If you're getting this error:
*** ERROR: MLT Python bindings failed to import ***
*** ERROR: MLT Python bindings failed to import ***
Exception in thread Thread-1:
Traceback (most recent call last):
File "/usr/lib/python2.6/threading.py", line 525, in __bootstrap_inner
self.run()
File "/us
The Openshot PPA to use for Karmic now is here:
https://launchpad.net/~jonoomph/+archive/openshot-edge
The old one at https://launchpad.net/~openshot.developers/+archive/ppa
is no longer maintained.
--
[needs-packaging] OpenShot Video Editor
https://bugs.launchpad.net/bugs/441678
You received t
Once you have dragged the effect onto a clip item on the track, you then
need to right click on the clip and set the properties for the effect.
On the effects tab there is a preview window where you can see how your
settings affect the clip.
** Changed in: openshot
Status: New => Invalid
-
https://bugs.launchpad.net/ubuntu/+source/mlt
or, proabably the better option:
http://www.mltframework.org/twiki/bin/view/MLT/
and their bug tracker:
http://sourceforge.net/tracker/?atid=613414&group_id=96039&func=browse
--
openshot crashed with SIGSEGV in mlt_properties_count()
https://bugs.
** Changed in: openshot
Status: New => Incomplete
--
openshot crashed with AttributeError in on_motion_notify_x()
https://bugs.launchpad.net/bugs/533460
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
** Changed in: openshot
Status: New => Incomplete
--
openshot crashed with AttributeError in save_project_state()
https://bugs.launchpad.net/bugs/532305
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I'm not sure what is causing your problem, but I can't reproduce this.
Whether I import 1 or 100 JPG files, I don't have a problem.
--
openshot crashed with SIGSEGV in mlt_properties_count()
https://bugs.launchpad.net/bugs/555769
You received this bug notification because you are a member of Ubun
** Changed in: openshot (Ubuntu)
Status: New => Invalid
** Changed in: openshot (Ubuntu)
Status: Invalid => New
--
openshot crashed with SIGSEGV in mlt_properties_count()
https://bugs.launchpad.net/bugs/555769
You received this bug notification because you are a member of Ubuntu
Bu
Acer Aspire 5935g
dmidecode -s system-product-name
Aspire 5935
dmidecode -s system-version
V1.08
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series
Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
01:00.0 VGA compatible controller [0300]: nVidia Corpor
I am also effected by this. My employer has just bought me an Acer Aspire
5935G specifically so I can do development work on an OpenGL based application.
However I can not access the Nvidia graphics card. The machine has two graphics
cards:
00:02.0 VGA compatible controller: Intel Corporation
I looked really hard! Typically for a laptop the bios is pretty minimal.
--
support graphics card hot switch
https://bugs.launchpad.net/bugs/312756
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bu
Public bug reported:
Binary package hint: ubuntuone-client
ubuntuone-client crashes on connect
ProblemType: Bug
.home.les..config.ubuntuone.syncdaemon.conf:
[bandwidth_throttling]
read_limit = 0
write_limit = 0
on = False
.home.les..config.ubuntuone.ubuntuone.client.conf:
[ubuntuone]
bookm
** Attachment added: ".home.les..cache.ubuntuone.log.oauth.login.log.txt"
http://launchpadlibrarian.net/40136081/.home.les..cache.ubuntuone.log.oauth.login.log.txt
** Attachment added:
".home.les..cache.ubuntuone.log.syncdaemon.exceptions.log.txt"
http://launchpadlibrarian.net/40136082/.
This seems like the same problem I had. I was installing "Ubuntu
restricted extras" through "Ubuntu Software Center", and the installer
stopped progressing at 54%, with zero indication as to what was going
on. I ran "ps -A" and noticed there was a "preinst" process holding up
the install. I was pre
Public bug reported:
Hyper-V VM type 2 with the Secure Boot with EFI signing password.
Installed using the GUI installer, setting the EFI password when prompted.
System boots fine.
On 'apt upgrade', new grub2-signed post-install script didn't prompt for
the password, that may be what went wrong.
Fresh install, not upgrading from prior release.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1871992
Title:
package grub-efi-amd64-signed 1.139+2.04-1ubuntu24 failed to
install/upgrade: Hyper-V
Public bug reported:
upgrade failed
ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: update-manager 1:0.134.11.2
ProcVersionSignature: Ubuntu 2.6.32-55.117-powerpc 2.6.32.61+drm33.26
Uname: Linux 2.6.32-55-powerpc ppc
Architecture: powerpc
Date: Fri Jan 3 10:41:07 2014
InstallationMedia: Xu
** Changed in: juju-core
Assignee: (unassigned) => Nate Finch (natefinch)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1304407
Title:
juju bootstrap defaults to i386
To manage notificati
** Branch linked: lp:~natefinch/juju-core/045-amd64plz
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1304407
Title:
juju bootstrap defaults to i386
To manage notifications about this bug go to:
htt
*** This bug is a duplicate of bug 984063 ***
https://bugs.launchpad.net/bugs/984063
Public bug reported:
Turned on system it said cryptically that the system encountered an
error did I want to send a report. (that screen could be improved it
almost looked like a trojan)
ProblemType: Package
*** This bug is a duplicate of bug 984063 ***
https://bugs.launchpad.net/bugs/984063
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/987356
Title:
package ruby-rvm 1.6.9-0ubuntu2 [modified: var/li
I think you need to log this as a sync-request bug against Ubuntu.
** Changed in: openshot
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/970901
Title:
Update MLT ve
Public bug reported:
I run Startup Applications select Guake (a quake style terminal) and
click the close button. Reboot the system and Guake is not loaded.
Check Startup Applications and Guake is unselected again. Select it and
click close then reopen and it is again unselected.
To test if it
It still affects RVM on my system. This just occurred (for a few weeks,
but not a big rush for me)
$ sudo apt-get install ruby-rvm
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
ruby-rvm
0 upgraded,
** Changed in: openshot (Ubuntu)
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/693190
Title:
could not find glade file at startup
--
ubuntu-bugs mailing list
ubuntu-b
I get this too when I install something while copying files over the
network with rsync, to a raid which was on different drives than the
root partition. dpkg freezes at the unpacking step for many minutes,
even though the file copying is happening on different drives. dpkg
should not be waiting on
I also get entries like this in /var/log/messages after dpkg's hang on sync():
kernel: [ 4918.834150] dpkg D 0 6043 6022
0x
kernel: [ 4918.834156] 880108747d38 0082 00015bc0
00015bc0
kernel: [ 4918.834161] 88011e0d4890
My root / was on an sd card (ext4), which would count as usb, though the
only other disk access besides dpkg at the time was rsync writing to
physical disks (ext4 mounted to /backup on lvm on md raid 1 made of two
sata disks connected to an lsi 1068e sas controller). If not for dpkg's
reliance on s
This started happening to me when I upgraded to 15.04 (from 14.04
stepping through 14.10). After several deletions (seemed like every
update or every couple boots), I ended up disabling the gpu-manager
service and making xorg.conf read-only and sticky for added measure.
gpu-manager only caught my
To help narrow down the problem, please can you try speeding up your
videos using ffmpeg & melt:
for ffmpeg, something like this:
ffmpeg -i input.mkv -filter:v 'setpts=0.5*PTS' output.mkv
for melt, I don't know the exact cmd line syntax to use, so create a
simple project in OpenShot that has the
Public bug reported:
Tried to use empath to connect and chat on facebook today and it keeps
authenticating and being dropped. The authentication last long enough
to see my friends list, but before I could chat it drops the connection.
Empathy Version 3.4.1
Ubuntu 12.04
All updates applied
This
** Attachment added: "Empathy Debug Log"
https://bugs.launchpad.net/bugs/995542/+attachment/3133664/+files/Facebook%20broken%20-%20All-06-05-12_09-30-08.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net
Today Facebook is working without changing anything. I am guessing this
is not a bug. Probably some kind of service failure on Facebook. I
will update this bug if it happens again with the debug log.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
** Changed in: openshot
Status: Incomplete => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/970901
Title:
Update MLT version in 12.04 repo. Unstable, outdated, and unreleased
versi
** Changed in: openshot
Importance: Medium => High
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/672483
Title:
openshot crash when exporting to a read-only directory
To manage notifications abou
** Changed in: openshot (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/958056
Title:
I have distro 11.10 .- I install Editor video Openshot but I cannot
o
** Changed in: openshot (Ubuntu)
Status: Confirmed => Fix Committed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/927755
Title:
Dragging video to timeline eats RAM
To manage notifications ab
Even a small amount of research would reveal this PPA:
https://launchpad.net/~sunab/+archive/kdenlive-release
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/970901
Title:
Update MLT version in 12.04
Deinterlace filter is included in Openshot 2.0
** Changed in: openshot
Status: New => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/910073
Title:
No option to deinterlace a vide
I get this on startup when chrome is running in the background. And
then tabs in chrome randomly crash. Only happened after upgrading to
utopic, same chrome version otherwise booting to the kernel from
trusty doesn't help either.
--
You received this bug notification because you are a membe
** Changed in: juju-core
Assignee: Nate Finch (natefinch) => Wayne Witzel III (wwitzel3)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1078213
Title:
logs are not logrotated
To man
So, yes, this is something that should be fixed, however, if you have
access to the database, you can just add data to it to tell Juju to spin
up a unit on the bootstrap node that runs as root and you can then do
whatever you want with it. So, while it would be better for
appearances' sake to not
Public bug reported:
I got a notice that not all upgrades could be run, as shown in the
attached image. The problem is that the UI is confusing.
There's a "partial upgrade" button, whose purpose is clear, but there's
alternatively a "continue" button, and I have no idea what that will do.
Contin
This happens sporadically on my 2013 Dell XPS-15 (same model Mark
Shuttleworth uses... just sayin' ;)
For me, the passowrd text box often just doesn't show up at all the
rest of the UI is there, but not the text box.
Sometimes I can click on guest session from the gear menu to get it
back, bu
Is there a more complete log output? This seems like just a snippet.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1347322
Title:
juju ssh results in a panic: runtime error
To manage notifications
I'm looking at this right now.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1318366
Title:
jujud on state server panic misses transaction in queue
To manage notifications about this bug go to:
htt
Is there a more complete log than the one posted on james-page's link?
That one appears to be cut off at a million lines, and doesn't contain
the full panic output, and nothing before the panic, which would be very
helpful.
--
You received this bug notification because you are a member of Ubuntu
Note: I received full logs privately, as they may have sensitive info.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1318366
Title:
jujud on state server panic misses transaction in queue
To manage
** Changed in: openshot
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/827630
Title:
application crash on startup
To manage notifications about this bug go to:
https
** Changed in: openshot
Status: Triaged => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/574870
Title:
Need ability to extract videos from AVCHD camcorders with metadata
To manage
This bug has been fixed in version 1.4.3 of OpenShot.
https://bugs.launchpad.net/openshot/+bug/900796
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/874906
Title:
can't import files more than one ti
*** This bug is a duplicate of bug 900796 ***
https://bugs.launchpad.net/bugs/900796
** This bug has been marked a duplicate of bug 900796
when i run openshot i am able to import a file one time only.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
When editing in gedit I go to create a folder or file by right clicking
in the file browser in empty white space and gedit terminates. This is
very frustrating as I have backup turned off to prevent the litter which
has caused me to loose work.
System:
Ubuntu 12.04
gedit 3.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1006967
Title:
Right click in file browser intermittently crashes gedit
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/
I checked and there is no crash report in /var/crash. Do these stay
after a reboot? How can I force gedit to create the report?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1006967
Title:
Right c
I'm reluctant to apply this patch, because I can't reproduce the bug.
I am using Linux Mint 13 and the latest trunk source code. The Import
files dialog opens ok no matter how many times I select the Import Files
option.
--
You received this bug notification because you are a member of Ubuntu
Bu
That is fixed in the next version which will be released soon (bug here:
https://bugs.launchpad.net/openshot/+bug/1002675)
That is included in the Daily PPA, so you have the option of using that,
but with the caveat that you could experience some bleeding edge type
issues.
--
You received this b
Actually, I'm not too sure about packaging bugs and the daily ppa, as
the packaging stuff lives in a different branch. So my comment above may
or may not be accurate :-)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.laun
*** This bug is a duplicate of bug 499739 ***
https://bugs.launchpad.net/bugs/499739
** This bug has been marked a duplicate of bug 499739
Remember all settings after exporting
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
ht
** Also affects: openshot
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/672483
Title:
openshot crash when exporting to a read-only directory
To manage no
** Changed in: openshot (Ubuntu)
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/543960
Title:
Transitions are very difficult to put in place
To manage no
** Also affects: openshot
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/922203
Title:
down dissolves revert to up dissolves when moved on the timeline
To
** Also affects: openshot
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/922207
Title:
"replace clip" does not work if the new clip has the same filename b
** Changed in: openshot (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/878878
Title:
preview window shows incorrect frames
To manage notifications about thi
*** This bug is a duplicate of bug 827630 ***
https://bugs.launchpad.net/bugs/827630
** This bug has been marked a duplicate of bug 827630
application crash on startup
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bug
*** This bug is a duplicate of bug 792416 ***
https://bugs.launchpad.net/bugs/792416
** This bug has been marked a duplicate of bug 792416
Documentation
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net
openshot doesn't use phonon or gstreamer, so not sure why it's been set
as being affected by this bug.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/918688
Title:
phonon-backend-gstreamer seems to h
This sounds like bug 505578, which was fixed in 1.4.1
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1078895
Title:
Importing an image sequence messes up GUI
To manage notifications about this bug g
*** This bug is a duplicate of bug 752674 ***
https://bugs.launchpad.net/bugs/752674
By the way, it would help us from an admin point of view if you log bugs
against the Openshot Video Editor project
(https://bugs.launchpad.net/openshot) rather than openshot(ubuntu).
Thanks.
** This bug has b
It's probably best to deactivate the PPA.
** Changed in: openshot (Ubuntu)
Status: Confirmed => Invalid
** Changed in: mlt (Ubuntu)
Status: Confirmed => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https
So what happens if you double click the clip while it is in the project
files tree?
Can you follow the guide here:
https://answers.launchpad.net/openshot/+faq/983
Hopefully from that we can find out whether the problem can be traced to
either ffmpeg or MLT.
--
You received this bug notificatio
What is the source of this file? I've tried it on Openshot 1.4.2 and it
doesn't eat all the memory, it gets imported as a zero length file.
MLT (melt) shows the message "[matroska @ 0x8620be0]Estimating duration
from bitrate, this may be inaccurate".
FFMpeg shows:
[matroska @ 0x91680e0]Unknown e
Is this with version 0.7.4 of MLT? Can you try with 0.7.6, available
when you add this PPA:
sudo add-apt-repository ppa:sunab/kdenlive-release
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/927755
Tit
** Changed in: openshot (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/884050
Title:
program closed automatically when apply effect to video
To manage noti
OpenShot is developed for GTK. If Unity doesn't function properly with
it, it is a bug in Unity.
Maybe Canonical can contribute some development time to upstream
projects if they expect applications to work properly with their custom
interfaces.
** Changed in: openshot (Ubuntu)
Status: New
What action items would you suggest we ad to a Launcher? It's hard to
see any obvious uses for a video editor.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/938025
Title:
Add Unity Launcher Quicklis
1 - 100 of 129 matches
Mail list logo
