Public bug reported:
Symptoms:
On login, the desktop takes a long time to load, and when it does, everything
blinks. It is possible (but difficult) to open a terminal and execute commands,
through the right-click desktop menu.
I first noticed the issue in mid-July of 2018.
System:
Acer 5100
Ub
The following packages seem to be leftover from an old release of Ubuntu
which you were running. Could you try using 'sudo apt autoremove' to see
if they are removed automatically or try removing them manually and then
upgrading? Thanks in advance.
>From VarLogDistUpgradeMain.log:
emacs24-common
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: gnome-shell (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1797174
Title:
@Mario: Wanted you to know that I saw your objection, but too late..
Sorry. Let's deal with it in the beginning of the 19.04 cycle.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1791367
Title:
Airpl
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: iio-sensor-proxy (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1797174
Ti
Thanks, Joe. And urgh, whenever I wrote 90 degrees in the previous
comment I meant 180. I copied the fixed description to the other bug.
By the way, the other bug says that this enables the sensors on kernel
4.18 as well:
modprobe intel-ish-ipc
echo "8086 a135" > /sys/bus/pci/drivers/intel_ish_ip
Thank you. I had written bug #1792813 about the sensors not being found
with kernel 4.18. This is fixed in the mainline 4.19 (see the other
report).
The incorrect automatic back rotation also happens with 4.19. However,
note that what exactly happens depends on whether the keyboard vs
display angl
No worries, as the Dell shows it seems not a no-brainer anyway, so
better to postpone. Thanks
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1791367
Title:
Airplane mode key on Asus ZenBook Flip UX56
Please install the updated version of the nvidia-304 package and then
try the upgrade process again.
** Changed in: ubuntu-release-upgrader (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
http
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: timidity (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1798466
Title:
C
** Changed in: kernel-sru-workflow/promote-to-proposed
Status: Confirmed => Fix Committed
** Changed in: kernel-sru-workflow/promote-to-proposed
Assignee: Ubuntu Stable Release Updates Team (ubuntu-sru) => Steve
Langasek (vorlon)
--
You received this bug notification because you are
hi Joseph,
I understand this patch will make the next SRU, correct?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1792957
Title:
Provide mode where all vCPUs on a core must be the same VM
To manag
Is any developer actively working on this?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1724876
Title:
libreoffice soffice.bin using 100% cpu
To manage notifications about this bug go to:
https://
Found another non-working tip:
change the configuration file "sofficerc" and change Logo=1 to Logo=0
Tried, to no resolve. Bug and high cpu load persists
see: https://community.alfresco.com/thread/184308-sofficebin-has-cpu-
pinned-at-100
--
You received this bug notification because you are a
I've tested this with MAAS in a remote s390x system, and confirm it
works out of the box. So I'm +1.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1790901
Title:
How to use s390x pxelinux style netw
** Changed in: kernel-sru-workflow/promote-to-updates
Status: Confirmed => Fix Committed
** Changed in: kernel-sru-workflow/promote-to-updates
Assignee: Ubuntu Stable Release Updates Team (ubuntu-sru) => Steve
Langasek (vorlon)
** Changed in: kernel-sru-workflow/promote-to-security
@Eric,
i just tested what you suggested at your comment #31 with Ubuntu 18.10 release
...
KERNEL http://pxe-server/nfs/ubuntu-x64/casper/vmlinuz
INITRD http://pxe-server/nfs/ubuntu-x64/casper/initrd
APPEND nfsroot=192.168.1.1:/srv/nfs/ubuntu-x64 ro netboot=nfs
file=/cdrom/preseed/ubun
** Changed in: kernel-sru-workflow/promote-to-proposed
Status: In Progress => Fix Committed
** Changed in: kernel-sru-workflow/promote-to-proposed
Assignee: Łukasz Zemczak (sil2100) => Steve Langasek (vorlon)
--
You received this bug notification because you are a member of Ubuntu
Bu
The package has been published and the bug is being set to Fix Released
** Changed in: kernel-sru-workflow/promote-to-security
Status: Fix Committed => Fix Released
** Changed in: kernel-sru-workflow/promote-to-updates
Status: Fix Committed => Fix Released
** Changed in: kernel-sr
Public bug reported:
In order to deal with the fact that users often modify /usr/bin/python
DistUpdgradeControler.py attempts to verify it is set to the correct version:
...
fs_default_version = os.readlink('/usr/bin/python')
except OSError as e:
logging.error("os.readlink faile
** Summary changed:
- Removal fails with `update-inetd: error: --group is only relevant with --add`
+ install or removal fails with `update-inetd: error: --group is only relevant
with --add`
** Changed in: sendmail (Ubuntu)
Importance: Undecided => High
** Changed in: sendmail (Ubuntu)
*** This bug is a duplicate of bug 1792582 ***
https://bugs.launchpad.net/bugs/1792582
Public bug reported:
I was just trying to install sendmail and it didn't install.
ProblemType: Package
DistroRelease: Ubuntu 18.10
Package: sendmail-base 8.15.2-11
ProcVersionSignature: Ubuntu 4.18.0-10.11
Public bug reported:
https://github.com/pop-os/pop/issues/370
** Affects: gnome-control-center (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1
Public bug reported:
Description:Ubuntu 16.04.5 LTS
Release:16.04
apt-cache policy libgvc6:armhf
libgvc6:armhf:
Installed: 2.38.0-12ubuntu2.1
Candidate: 2.38.0-12ubuntu2.1
Version table:
*** 2.38.0-12ubuntu2.1 500
500 http://ports.ubuntu.com/ubuntu-ports xenial-update
Thanks for taking the time to report this bug and helping to make Ubuntu
better. We appreciate the difficulties you are facing, but this appears
to be a "regular" (non-security) bug. I have unmarked it as a security
issue since this bug does not show evidence of allowing attackers to
cross privile
There are two cifs specific commits between -rc2 and -rc3:
395a2076b406 cifs: connect to servername instead of IP for IPC$ share
c15e3f19a6d5 fs/cifs: don't translate SFM_SLASH (U+F026) to backslash
I built a test kernel with these commits to rule them out as being the fix.
The test kernel ca
Public bug reported:
It just fails to install and/or upgrade.
ProblemType: Package
DistroRelease: Ubuntu 18.10
Package: elpa-helm 2.9.7-1
ProcVersionSignature: Ubuntu 4.18.0-10.11-generic 4.18.12
Uname: Linux 4.18.0-10-generic x86_64
ApportVersion: 2.20.10-0ubuntu13
Architecture: amd64
Date: Fri
** Attachment added: "version.log"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798880/+attachment/5203154/+files/version.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1798880
Title:
Thanks for taking the time to report this bug and helping to make Ubuntu
better. We appreciate the difficulties you are facing, but this appears
to be a "regular" (non-security) bug. I have unmarked it as a security
issue since this bug does not show evidence of allowing attackers to
cross privile
Public bug reported:
[ 1276.702446] pcieport :00:1c.5: AER: Corrected error received:
:00:1c.5
[ 1276.702457] pcieport :00:1c.5: PCIe Bus Error: severity=Corrected,
type=Physical Layer, (Receiver ID)
[ 1276.702466] pcieport :00:1c.5: device [8086:a115] error
status/mask=00
This change was made by a bot.
** Changed in: linux (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1798880
Title:
PCIe Bus Error: severity=Corrected, type=Ph
Hello Mauricio, or anyone else affected,
Accepted node-tap into bionic-proposed. The package will build now and
be available at https://launchpad.net/ubuntu/+source/node-
tap/11.0.0+ds1-2ubuntu0.1 in a few hours, and then in the -proposed
repository.
Please help us by testing this new package. S
Just want to add that this is observed with any snap application on
Ubuntu 18.10. Not limited to System monitor or calculator.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1798629
Title:
[snap] Sys
Hello Simon, or anyone else affected,
Accepted vlc into bionic-proposed. The package will build now and be
available at https://launchpad.net/ubuntu/+source/vlc/3.0.4-1ubuntu0.2
in a few hours, and then in the -proposed repository.
Please help us by testing this new package. See
https://wiki.ubu
Public bug reported:
Today I've got an update to openssh-server version 1:7.2p2-4ubuntu2.5
but installation fails. Also when I purge the package and install it
again, I get the same error message:
openssh-server (1:7.2p2-4ubuntu2.5) wird eingerichtet ...
insserv: warning: script 'screen-cleanup'
Public bug reported:
I have a file server running Ubuntu 18.04 LTS which has strange behavior
with systemd and dbus during heavy I/O load. The file server is set up
with RAID60 with mdadm serving via NFS. When I/O load becomes high, it
appears that dbus and systemd-logind are slowing down for SSH
** Changed in: kernel-sru-workflow/automated-testing
Status: New => Confirmed
** Changed in: kernel-sru-workflow/promote-to-proposed
Status: Fix Committed => Fix Released
** Changed in: kernel-sru-workflow/regression-testing
Status: New => Confirmed
** Changed in: kernel-sru
Did this issue start happening after an update/upgrade? Was there a
prior kernel version where you were not having this particular problem?
Would it be possible for you to test the latest upstream kernel? Refer
to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
v4.19 kernel[0
As I had too much network interfaces, I uninstalled the lxc package
which I didn't use anyway. Then I removed the recently created network
to have everything as simple as possible. As this didn't help at all I
configured the IPv4 address statically (in the guest). I must have
screwed something up t
I am concerned about the implementation in the package in the queue,
which is applying its own heuristics to determine which build system
should be used. Why is this not leveraging the debhelper Buildsystem
module, which would ensure dh_translations would be consistent with
dh(1) - and, in particu
Please update the package! It breaks vim for ale users, which surely
make up a significant percentage of serious users.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1768026
Title:
echo message hide
Public bug reported:
Upon upgrading from 18.04 to 18.10, only one of my displays is working.
Only one display shows in control centre. I have two, one connected via
DisplayPort, one via VGA.
The VGA works, DP doesn't.
If I unplug the VGA display, then the DisplayPort display turns on.
Plug it
I have the same problem. tested on several fresh installs of Xubuntu
17.10 and Xubuntu 18.04.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1778069
Title:
[xfce] nautilus don't open files if set as
** Changed in: gnome-initial-setup (Ubuntu)
Status: New => Confirmed
** Changed in: gnome-initial-setup (Ubuntu)
Importance: Undecided => Medium
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs
*** This bug is a duplicate of bug 1722478 ***
https://bugs.launchpad.net/bugs/1722478
I had the same issue, and got it fixed by using the following comment:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1722478/comments/72
--
You received this bug notification because you are a memb
Public bug reported:
[Impact]
After installing octavia-api the systemd unit fails to start:
Failed 'systemctl status octavia-api' output shows:
error: unrecognized arguments: --http-socket [::]:9876 --ini
/etc/octavia/octavia-api-uwsgi.ini
[Test Case]
1) sudo apt install octavia-api
2) watch s
The package: xul-ext-lightning should be installed when Thunderbird is
installed. That would be the best fix for this.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1798799
Title:
lightning add on n
Bit of feedback: It might make sense in the future to have some better
error messages about how to fix an error like this.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1798814
Title:
Could not dete
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: thunderbird (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1798799
Title:
Yes, that solved it, and I am now running 18.10!
Thanks for the help and a great job :)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1798814
Title:
Could not determine the upgrade ubuntu 18.04 to
** Changed in: kernel-sru-workflow/automated-testing
Status: New => Confirmed
** Changed in: kernel-sru-workflow/promote-to-proposed
Status: Fix Committed => Fix Released
** Changed in: kernel-sru-workflow/regression-testing
Status: New => Confirmed
** Changed in: kernel-sru
Hello James, or anyone else affected,
Accepted ceph into bionic-proposed. The package will build now and be
available at
https://launchpad.net/ubuntu/+source/ceph/12.2.8-0ubuntu0.18.04.1 in a
few hours, and then in the -proposed repository.
Please help us by testing this new package. See
https:/
Getting this "task kworker blocked for more than 120 seconds" with
nvidia-drivers-390 on Ubuntu 18.04 (Kernel 4.15.0.36-generic). I have a
GTX 1070Ti and GTX 770 installed.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.l
I'm also running into this problem:
[ 775.468546] xhci_hcd :02:00.0: ERROR unknown event type 15
[ 780.582774] xhci_hcd :02:00.0: xHCI host not responding to stop endpoint
command.
[ 780.582807] xhci_hcd :02:00.0: xHCI host controller not responding,
assume dead
[ 780.582838] xhc
There is another bug like this, to which I added some more info:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1795763
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1794074
Title:
xhci_hcd
** Description changed:
[Impact]
After installing octavia-api the systemd unit fails to start:
Failed 'systemctl status octavia-api' output shows:
error: unrecognized arguments: --http-socket [::]:9876 --ini
/etc/octavia/octavia-api-uwsgi.ini
[Test Case]
1) sudo apt insta
Hello Michael, or anyone else affected,
Accepted docker.io into bionic-proposed. The package will build now and
be available at
https://launchpad.net/ubuntu/+source/docker.io/18.06.1-0ubuntu1~18.04.1
in a few hours, and then in the -proposed repository.
Please help us by testing this new package.
** Description changed:
[Impact]
After installing octavia-api the systemd unit fails to start:
Failed 'systemctl status octavia-api' output shows:
error: unrecognized arguments: --http-socket [::]:9876 --ini
/etc/octavia/octavia-api-uwsgi.ini
+
+ The problem is that init files
Public bug reported:
Ubuntu 14.04.5 LTS i686
libstdc++6:i386 = 4.8.4-2ubuntu1~14.04.4
libc6:i386 = 2.19-0ubuntu6.14
Installed ORACLE Java using oracle-java8-installer = 8u191-1~webupd8~1
Installer works fine, but palemoon does not start:
palemoon: symbol lookup error:
/usr/lib/jvm/java-8-oracl
Same issue. Resolved installing packages from @maarten repo. Thanks
@maarten!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1790966
Title:
Electron apps segfault on glibc 2.28 (cosmic)
To manage no
--- Comment From stefan.ra...@de.ibm.com 2018-10-19 16:03 EDT---
Uh, now that would be me :O
Two aspects:
kvm_stat would need commit 58f33cfe73076 "tools/kvm_stat: fix python3 issues"
from the kernel tree, which came with 4.19. I believe it was pulled into the
stable kernels, but upon che
Confirmed on Dell G3 3579, Ubuntu 18.10
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:Ubuntu 18.10
Release:18.10
Codename: cosmic
$ uname -a
Linux masked 4.18.0-10-generic #11-Ubuntu SMP Thu Oct 11 15:13:55 UTC 2018
x86_64 x86_64 x86_64 GNU/Lin
I've uploaded a fix for this to the cosmic review queue:
https://launchpad.net/ubuntu/cosmic/+queue?queue_state=1&queue_text=
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1798891
Title:
[SRU] octav
I too have this problem on multiple computers. Laptops behave the worst.
I tried a temporary work around:
in .bashrc I added:
alias text='systemctl isolate multi-user.target'
alias graphical='systemctl isolate graphical.target'
I then can type text to get to the virtual terminals and
type graphica
** Tags added: patch
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1793458
Title:
Overlayfs in user namespace leaks directory content of inaccessible
directories
To manage notifications about thi
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: pulseaudio (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1797714
Title:
My hardware
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller
(rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor
PCI Express x16 Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family
USB xH
I've upgraded today to 18.10, after fist reboot no audio and the UI only
shows a 'Dummy Device'.
With a "alsa force-reload" the sound become available, but after a reboot same
problem.
Removing timidity the issue appear solved.
--
You received this bug notification because you are a member of U
This bug is missing log files that will aid in diagnosing the problem.
While running an Ubuntu kernel (not a mainline or third-party kernel)
please enter the following command in a terminal window:
apport-collect 1786139
and then change the status of the bug to 'Confirmed'.
If, due to the nature
** Changed in: chromium-browser (Ubuntu)
Importance: Undecided => High
** Changed in: colord (Ubuntu)
Importance: Undecided => High
** Changed in: eog (Ubuntu)
Importance: Undecided => High
** Changed in: gnome-control-center (Ubuntu)
Importance: Undecided => High
--
You received t
Many thanks Theo. I replied to your linked bug and also created this bug
report: https://bugzilla.xfce.org/show_bug.cgi?id=14774
** Bug watch added: Xfce Bugzilla #14774
https://bugzilla.xfce.org/show_bug.cgi?id=14774
--
You received this bug notification because you are a member of Ubuntu
Bu
** Also affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1786139
Title:
[GLK/CLX] Enhanced IBRS
To manage notifications about this b
** Changed in: linux (Ubuntu)
Status: In Progress => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1568729
Title:
divide error: [#1] SMP in task_numa_migrate - handle_mm_fau
With e2fsprogs 1.44.4-2:
bunzip2 vda1b.qcow2.bz
qemu-img convert vda1b.qcow2 vda1b.raw
e2fsck -f vda1b.raw
resize2fs vda1b.raw 6200M
e2fsck -f vda1b.raw
e2fsck 1.44.4 (18-Aug-2018)
Pass 1: Checking inodes, blocks, and sizes
Inode 45746 extent block passes checks, but checksum does not match exten
I've marked the Ubuntu 14.04 LTS (Trusty) task as Won't Fix. The
backport is not nearly as simple as the other releases and I don't feel
like the risk of regression is worth it on that release considering that
this is a new hardware enablement type of a feature and Ubuntu 14.04 LTS
only has 6 month
I have this exact issue on the latest update of 18.04. It only started
after a Kernel update.
Has anyone found a fix for this outside of the modprobe?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/172
PCManFM 1.3.0.1 on Lubuntu 18.04.1 LTS
Thinking a big, I looked for PCManFM 1.3.0.-1 at launchapd.net:
https://launchpad.net/ubuntu/cosmic/arm64/pcmanfm/1.3.0-1
and downloaded the .deb file below from the "Downloadable files" section
here:
http://launchpadlibrarian.net/368633026/pcmanfm_1.3.0-1
I also installed ubuntu 18.04.1 server from an usb stick (ubuntu-18.04.1
-live-server-amd64.iso). So not using MAAS or anything like that. Still
I had a /etc/default/grub.d/50-curtin-settings.cfg that messed up my my
settings from /etc/default/grub. maas or curtin is not installed.
I must say this
Public bug reported:
https://bugs.chromium.org/p/project-zero/issues/detail?id=1633
** Affects: linux (Ubuntu)
Importance: High
Status: Fix Released
** Affects: linux (Ubuntu Bionic)
Importance: High
Assignee: Tyler Hicks (tyhicks)
Status: In Progress
** Affects
This issue is already fixed in the Cosmic kernel (which means that "D"
is also fixed). The Bionic kernel needs these patches:
db7ddef301128dad394f1c0f77027f86ee9a4edb ("mm: move tlb_table_flush to
tlb_flush_mmu_free")
a6f572084fbee8b30f91465f4a085d7a90901c57 ("mm/tlb: Remove tlb_remove_table()
n
Sorry, the links I gave (in previous message) are bad.
Now, the good ones again.
First is for launchpad.net:
https://launchpad.net/ubuntu/cosmic/amd64/pcmanfm/1.3.0-1
And the second one is for the download link (amd64 achitecture):
http://launchpadlibrarian.net/368631138/pcmanfm_1.3.0-1_amd64.
Hi all,
bug #1785081 was not mirrored completely for some reason and I'm working
on fixing this : it's just about the bug happening on 18.04 specifically
kernel 4.15.0-26. Sorry for the lag.
Also, on ppc64el, RHEL 7.5 with a 4.14 kernel uses deadline, so I guess it's
not a completely unsafe path
Can't a libgvfs-nfs package be created separate from libgvfs-backends,
the way Fedora does it? (https://apps.fedoraproject.org/packages/gvfs-
nfs) That way it could stay in universe also. (I do think it should be
included by default, but libnfs11 is still stuck in universe as of
18.10).
--
You
I did some more tests today.
Note: this is a mechanical MicroSATA laptop drive.
# WRITE
## 4.15.0-36
$ sync; dd if=/dev/zero of=tempfile bs=1M count=1024; sync
1024+0 registros leídos
1024+0 registros escritos
1073741824 bytes (1,1 GB, 1,0 GiB) copied, 34,2693 s, 31,3 MB/s
$ sync; dd if=/dev/zer
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: googletest (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1792827
Title:
Public bug reported:
The upgrade completed and I do not see a problem with using the system.
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: ubuntu-release-upgrader-core 1:18.04.27
ProcVersionSignature: Ubuntu 4.15.0-36.39-generic 4.15.18
Uname: Linux 4.15.0-36-generic x86_64
ApportVersion:
*** This bug is a duplicate of bug 1781294 ***
https://bugs.launchpad.net/bugs/1781294
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: alsa-driver (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of
Public bug reported:
Looks like this has been fixed in kxstudio?
https://bugs.launchpad.net/kxstudio/+bug/619014
Unfortunately still a problem in Ubuntu 18.04.
The file that grows forever is ~/.log/jack/jackdbus.log.
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: jackd2 1.9.12~dfsg-2
Pro
*** This bug is a duplicate of bug 1781294 ***
https://bugs.launchpad.net/bugs/1781294
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: pulseaudio (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of U
I got this problem as well. When the screen lock starts (due to time-out
or manually pushing the lock screen button), I will get a very fast
blinking cursor on a black screen.
I'm using XFCE with Lightdm.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is sub
Joe, for the 2nd issue initially reported here, about "After the KVP daemon is
being started the following messages appear".
We've noticed a regression for this in 18.10 - daily's and even GA.
Can you please add Cosmic 18.10 to the bug here and re-open or should I send a
new bug report for it?
T
Hi!
Had same issue. Fixed by removing from `/etc/default/grub` the `nomodeset`
parameter from the `GRUB_CMDLINE_LINUX="nomodeset"`as to obtain:
`GRUB_CMDLINE_LINUX=""` then run `sudo update-grub` and reboot the laptop
--
You received this bug notification because you are a member of Ubuntu
Bug
On Fri, Oct 19, 2018 at 14:36:35 -, Manuel López-Ibáñez wrote:
> Both of them work. I don't understand how the last command can work and
> I may still be behind a firewall.
"ntpdate -d" sends packets using an unprivileged source port, so
a firewall could allow those packets but block outgoing
I used this for now:
root@bionic-slapd-consumer:/etc/apparmor.d# cat local/usr.sbin.slapd
# Site-specific additions and overrides for usr.sbin.slapd.
# For more details, please see /etc/apparmor.d/local/README.
/etc/krb5/user/[0-9]*/client.keytab rk,
/tmp/krb5cc_[0-9]* rwk,
I'm checking if
Hi Steve,
Since I'm the formal uploader of this SRU proposal, I'd better say
something, even if I think that e.g. Laney and Didier are better
prepared to comment on the approach.
For several cycles dh_translations has used its own, pretty simplistic,
heuristic to detemine both the gettext domain
Confirmed finally, sorry for the delay. I'll get this fixed.
** Changed in: openldap (Ubuntu)
Status: Triaged => In Progress
** Changed in: openldap (Ubuntu)
Assignee: (unassigned) => Andreas Hasenack (ahasenack)
--
You received this bug notification because you are a member of Ubun
Hi -
This commit appears to fix this problem.
https://sourceware.org/git/gitweb.cgi?p=systemtap.git;a=commitdiff;h=8bc64034509474bee3fb7996b2a9e74c8bc27281
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bu
Hi Kai-Heng @kaihengfeng,
I can confirm that suspend works as expected under Ubuntu 18.10 using
the kernel from comment #162.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1728244
Title:
Touchpad s
** Changed in: xfce4-weather-plugin (Ubuntu)
Status: Expired => New
** Also affects: greybird-gtk-theme (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad
I was sent a message asking if this bug still existed. I responded that
it did, yet the bug report was changed to expired. How can this bug be
reopened? Why was it previously in an incomplete state. I believe that
I provided all of the requested information.. Am I suppose to change
the status
301 - 400 of 499 matches
Mail list logo
