Silly question but is this in the latest stable kernel (2.6.35-25) or do
I have to apply a patch manually? I ask because it's not working for me
in Ubuntu 10.10 with the standard kernel but does work if I use any of
the patched kernels here:
http://people.canonical.com/~lexical/archive/lp446889/
-
Fix as per the tested patch is already in Karmic and later kernels,
closing out the development task Fix Released.
** Changed in: linux (Ubuntu)
Status: Incomplete => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Tags added: maverick
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubu
** Changed in: linux (Ubuntu)
Assignee: Keng-Yü Lin (lexical) => (unassigned)
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
A solution to this problem may have been found by a poster on an
Ubuntu forum (see
http://ubuntuforums.org/showthread.php?p=9720270#post9720270) which
involves changing the router security scheme from AES+TKIP to AES alone,
along with blacklisting rt2800usb.
As long as this doesn't present a sec
The original patch is already in Lucid kernel. I will suggest to `rmmod
rt2800usb` and `modprobe rt2870sta` directly or add rt2800usb in
/etc/modprobe.d/blacklist.conf. No need to get patched kernel.
Not seen any report that WPA2 works so change the status as incomplete.
--
Linksys WUSB54GC v3 (
** Changed in: linux (Ubuntu)
Status: In Progress => Incomplete
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
>From a nearly fresh Kubuntu install, I just installed the latest ppa
kernel and headers from this link:
http://kernel.ubuntu.com/~kernel-ppa/mainline/v2.6.34-rc7-lucid/
When I rebooted it displayed an error saying firmware rt3070.bin wasn't
available.
As I understood rt2870 and rt3070 were usin
I am running 32-bit Lucid and trying to get my Linksys WUSB54GC working.
After following different instructions I could see the green light on
and all the wireless signals detected. However, the WPA security is
still not working for me. It keeps trying and asking again and again the
password as if
Im very new to linux, and still rough around the edges. Will this patch
work on the latest verison of Mint? Does anyone know?
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which
Well, it looks like it's recognized in some way at least if there's so
much activity. The result I have in 'dmesg' when I plug it in for the
first time is similar to the first dozen or so lines of your output. I
assume you are using the generic kernel, not the server one? I don't
have WPA or WPA2,
I followed your instructions above (both packages) on a fresh install
of Lucid and the device does NOT work for me. You did not mention if
you were using WPA2 security or were unsecured. Here is the dialog:
ay 11 15:58:24 HOME AptDaemon: INFO: Initializing daemon
May 11 15:58:33 HOME kernel: [
The Linksys WUSB54GC v3 (ID 1737:0077) now works after installing
"linux-backports-modules-wireless-lucid-generic" and "linux-backports-
modules-headers-lucid-generic", yay! Blinking light and everything. I
have not stress tested it to see if it has the same eventual lag and
disconnect problems tha
You will not break your computer with what you have done. It appears
that we still must blacklist rt2800usb in /etc/modprobe.d/blacklist.conf
to get the device to work in kernel 2.6.32-21-generic. After that the
device will work fine as long as the access point is unsecured. Trying
to use WPA2
I am too afraid of breaking my computer, but which would we install to
test? And is there a way to add it to repositories instead of
downloading the file?
I have just upgraded to Lucid and dmesg shows the same as before for the
"1737:0077 Linksys" device:
[ 863.290142] usb 2-1: new high speed US
Hi all:
I sent the patch through SRU, but Ubuntu kernel team prefers it upstream
first.
I think it's good to confirm whether it works upstream or not with the latest
mainline build: http://kernel.ubuntu.com/~kernel-ppa/mainline/ . If the problem
still exists, I will the patch upstream. Ple
** Changed in: linux (Ubuntu)
Status: Incomplete => In Progress
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
@Keng-Yü Lin: The patched kernel 2.6.32-17 worked for me. WPA2 with
AES+TKIP. I didn't have to modify the firmware at all--stock 9.10 as
far as I can tell.
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you ar
I uploaded a patched lucid (2.6.32-17) kernel at
http://people.canonical.com/~lexical/archive/lp446889/. Please try and
reply whether it works with the encrypt. setup (WEP/WPA/WPA2) on your
AP. Some reported the rt3070 driver in the staging tree has some problem
with WPA2. So it will be nice if som
@jimbib #74 : I did not install 2.6.31-18-generic headers but just
linux-image-2.6.31-18-generic
@Keng-Yü Lin #67 :
> Since 2.6.31-stable is frozen upstream now and karmic is going to frozen
> in mid-February. I suggest to test
> Lucid(http://cdimage.ubuntu.com/releases/lucid/alpha-2/)
> and up
I was unable to install the above *.deb package because it couldn't
find the 2.6.31-18-generic headers. However it was encouraging in that
the green light on the device showed it was working and it got as far as
asking for the WPA2 key.
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https:
@Keng-Yü Lin #68/69: Firmware rt2870.bin does not work for me with kernel
2.6.31-20-generic.
Your kernel
http://people.canonical.com/~lexical/archive/lp446889/linux-
image-2.6.31-18-generic_2.6.31-18.56_i386.deb
works both with both your firmware and with the distribution firmware (
[8
@Keng-Yü Lin #68/69: I am sorry to say that the supplied rt2870.bin does
not work for me using the lastest kernel. The problem is the same: a
wireless device is created, but it does not work (no networks are
scanned).
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/b
i found the patch but how do you implement it?
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubunt
hope it works
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/ma
** Attachment added: "rt2870.bin"
http://launchpadlibrarian.net/38766008/rt2870.bin
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-
Anyone to test the new firmware either on the original kernel or patches
kernel. Put it in /lib/firmware. Of course back up the original one
first.
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member
** Changed in: linux (Ubuntu)
Status: In Progress => Incomplete
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
@darko
This is a useful information. IIRC, TKIP in WPA2 is optional to implement.
Could you try to collect some info in the WPA2 AES+TKIP and WPA2 AES settings?
Please run the following command from a Terminal
(Applications->Accessories->Terminal). It will automatically gather and
attach kernel
** Changed in: linux (Ubuntu)
Status: Confirmed => In Progress
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
** Also affects: linux (Fedora)
Importance: Undecided
Status: New
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
Hi,
I have the same problem with the WUSB54GCV3. Unfortunately, I cannot
use the patch since I'm running Fedora Core 12. Is there any chance that the
patch will be included in a new kernel soon?
Thanks!
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
Yo
Hi!
As my testing shows, the pathced kernel works with WPA2, but you should choose
AES and not AES+TKIP.
I would also be very glad if this patch could be integrated in official kernel
tree.
Darko
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You rece
** Changed in: linux (Ubuntu)
Status: New => Confirmed
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-b
I've been able to get my WUSB54GC working with the patched kernel
mentioned in comment #22 -- but not with WPA2. Unencrypted, WEP, and
WPA all work.
There's a new kernel version in the Karmic trees, however, that
supersedes the patched kernel, so after updating my system, the wireless
adapter no
This bug affects all Ralink rt3070 chips with ID(0x1737,0x0077) as the
OP specified. The new Ubuntu 9.10 Karmic Koala release with kernel
2.6.31-14-generic fails to properly detect this chip. Upon plugging the
dongle in it attempts to load driver rt2800usb which is incorrect.
Interesting readi
@Keng-Yü Lin, Ok thanks. Is there some website where you can follow the
status for this bug?
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ub
@mach3, I think this is a bug from upstream. All distros are affected.
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Hello - I am new to linux (ubuntu 9.10) and have the linksys wusb54gc v3
(1737:0077).
I have no wireless network at the moment - I am using the
RT3070USB(RT307x) from ralink website
http://www.ralinktech.com/support.php?s=2.
Is this some general ubuntu issue?
--
Linksys WUSB54GC v3 (ID 1737:007
Op maandag 23-11-2009 om 07:53 uur [tijdzone +], schreef Toni Lara:
> The installation of the patched kernel package for AMD64
> (kernel-image) kill the 3D acceleration of my computer. I have ATI
> Radeon HD3200 graphic card and need the proprietary drivers to have
> acceleration, the installat
The installation of the patched kernel package for AMD64 (kernel-image) kill
the 3D acceleration of my computer. I have ATI Radeon HD3200 graphic card and
need the proprietary drivers to have acceleration, the installation of the
patched kernel don't keep to activate the proprietary driver.
What
Encryption works if the router is set to WPA (not WPA + WPA2) and the
dongle is set to WPA + WPA2 with NetworkManager. In NetworkManager there
is no possibility to set encryption to WPA. I have not tested WEP.
Hot-plugging the dongle does not work. After plugging in the dongle I
have to reboot to
I've test the connection without encryption, and it works perfectly with
Linksys WUSB54GC v3 adapter now.
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ub
** Changed in: linux (Ubuntu)
Importance: Undecided => Medium
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubunt
Any feedback of testing with WEP/WPA/WPA2 is welcomed as AartCK reported
there're some problems with them.
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to U
Yes, it works!
Finally I've decided to test the patched kernel package for AMD64 (I installed
the kernel-image, because had the same problem that AartCK (#30)), and it works
perfectly!
Thanks a lot for the work!
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/
It works!
Tried the linked i386 kernel package and the Linksys dongle was picked up with
no problems.
Thank you so much for this.
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs,
I'm new here and a beginner with Ubuntu, but I have the same problem.
I want to test the patched kernel package for AMD64, but I'm afraid that this
could destabilize my Karmic, that now works quite well.
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
Yo
@AartCK No, you don't need to install the header for the testing.
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubun
I tried WAP + WPA2, that did not work. Now I also tested WPA, first on a
laptop with build-in WiFi with which WPA + WPA@ work, so I would be sure it
had nothing to do with the laptop. There WPA +WPA2 did not work with the
WUSB54GC but WPA only did work. Then the old laptop again, and there WPA
only
yes, I mean the patch from #21
BTW when I installed it, I could install the kernel-image ok, but the
kernel-headings would not install because a dependency was missing.
Should I force the installation of the headers?
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/b
@ Keng-Yu Lin
If you mean the patch from comment #21, then I wrote that.
@ AartCK
I don't know why encryption isn't working for you, but I can verify that
at least some encryption works. I personally had success using WPA2.
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launch
Still having problems with the WUSB54GC v3. When I reported it worked it was
with a unencrypted connection. Today tried to encrypt the connection (reason I
bought it, old card could only do WEP 64) Did not succeed. After fooling around
a bit I decided to restore the unencrypted connection, first
I uploaded the amd64 for testing
(http://people.canonical.com/~lexical/archive/lp446889/).
@btmorex
Can you tell where you found the patch? I need the author's name & mail in
the committing log.
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You rece
I also tested the patches on an old laptop. The headers could not be
installed because the generic headers for this kernel version were not
installed (of course) So I installed the image packet and rebooted. This
laptop is now on the net with the WUSB54GCV3. Thanks a lot
--
Linksys WUSB54GC v3 (I
I'm new here, so don't know how I should behave myself ;-)
I can confirm the bug. Tested the Linksys WUSB54GCV3 on two different laptops
and a desktop and al behave as mentioned above. With uname -a I get
2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686 GNU/Linux.
Anything I ca
Also, I'm actually surprised because I had assumed that there would need
to be a linux-firmware update as well. Upstream kernel.org apparently
just uses the firmware from the ralink 3070 driver for both 2870 and
3070, and afaik debian and ubuntu separate out the firmware (as opposed
to keeping it i
Yes, it works (with the caveat that I tested i386 instead of amd64 which
is what I normally run).
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
-
@btmorex
Would you please try the patched kernel package
(http://people.canonical.com/~lexical/archive/lp446889/) and report back
whether it works well?
** Changed in: linux (Ubuntu)
Status: Confirmed => Incomplete
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad
** Changed in: linux (Ubuntu)
Assignee: (unassigned) => Keng-Yü Lin (lexical)
--
Linksys WUSB54GC v3 (ID 1737:0077) doesn't work
https://bugs.launchpad.net/bugs/446889
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Here's a patch vs. kernel.org linux 2.6.31.4
I don't have ready access to Ubuntu kernel sources, but it probably
applies cleanly anyway.
** Attachment added: "rt3070-fix.patch"
http://launchpadlibrarian.net/34085839/rt3070-fix.patch
** Changed in: linux (Ubuntu)
Status: New => Confirme
Unfortunately we need additional information to further debug this
issue. Please run the following command from a Terminal
(Applications->Accessories->Terminal). It will automatically gather and
attach kernel debug information to this bug report.
apport-collect -p linux
** Changed in: linux (U
Same here with 2.6.31-14
Final dmesg output is:
[ 101.259686] phy0: Selected rate control algorithm 'minstrel'
[ 101.261454] Registered led device: rt2800usb-phy0::radio
[ 101.261497] Registered led device: rt2800usb-phy0::assoc
[ 101.261550] Registered led device: rt2800usb-phy0::quality
[ 1
63 matches
Mail list logo
