As far as I can tell this has not been fixed in Ubuntu.
This here finally solved my problem:
http://foo2zjs.rkkda.com
follow ALL instructions!
NOTE:
usb://HP/LaserJet%201020
worked. NOT
usb:/dev/usb/lp0
(see Printer Properties > Device URI).
--
cups: no printer output (hp 1020)
https://bu
Hi - as a relative newbie I am confused about this bug. I have a
laserjet 1020 and am running 10.04 and like the above people the printer
stopped working when I upgraded to 10.04. The printer is discovered by
the system but it fails to download the driver to the printer. from what
I see above this
Christopher, this bug is about problems of the HP LaserJet 1020 and its
necessity to load its firmware file every time when it is turned on.
Your LaserJet 2420d has its firmware built in as most printers have. So
your problem is different. Please report a new bug and follow the
instructions on http
I have an HP LasterJet 2420d and for the most part my pdfs print fine
from evince. I have run into documents though, that just fail completely
to print. They leave the print queue as if they had been printed. When I
use Adobe Reader to print these documents, gs takes 100% cpu for quite
some time be
Had some succes with manual compiling according to instructions from
http://foo2zjs.rkkda.com/
After a reboot the effects were undone, however.
But at least we know it's not the printer ;)
--
cups: no printer output (hp 1020)
https://bugs.launchpad.net/bugs/401140
You received this bug notifica
Unfortunately, all problems have not been fixed in Lucid.
I've tried all solutions I could find. HP LaserJet 1020
still not printing with Ubuntu 10.04. Full details and info
is here:
https://answers.launchpad.net/hplip/+question/109292
http://pastebin.org/240020
This goes on for two weeks now w
In Lucid, hp-plugin is run automatically when the printer is discovered
and no firmware file on the system. Also timing problems for loading the
firmware into the printer are fixed. So all the problems should be fixed
there.
** Changed in: hplip (Ubuntu)
Status: Incomplete => Fix Released
Finally, in 10.4 Lucid, (I'm using the 64 bit version) this appears to
be correctly resolved. The printer firmware is sent at a later time in
the process - after the desktop is up on the screen, in fact - and it
loads fully and properly. I assume this must have something to do with
the HAL changes?
To follow up the previous...
I went to the motherboard BIOS setup (Gigabyte motherboard) and disabled all
'legacy' ports - serial, parallel... everything I could find.
Now, FINALLY, for the first time in two years I can leave my printer turned on,
reboot the computer, and still have a working pr
Same bug as in Jaunty... never been fixed. I posted here long ago...
forwarded all info as requested... tried every 'fix' I ever saw on the
internet... same problem.
Basically: you can install this printer perfectly - either after Jaunty
or Karmic clean installs or by using the HP plugins, whateve
Today I was going to test the poppler downgrade as suggested,
but first I updated to all the latest packages and then tried printing, it
worked flawlessly.
So it seems after a clean install, all I hav eto do is run hp-plugin to make
the printer work.
--
cups: no printer output (hp 1020)
https:/
hp-plugin installed the printer's firmware, so that you can print at
all, but your reinstall of Karmic made bug 409962 apply. So please
downgrade Poppler as described there and then try again and report back
here.
--
cups: no printer output (hp 1020)
https://bugs.launchpad.net/bugs/401140
You rec
** Attachment added: "hp-info3.txt"
http://launchpadlibrarian.net/30080788/hp-info3.txt
--
cups: no printer output (hp 1020)
https://bugs.launchpad.net/bugs/401140
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs maili
After a fresh reinstall of Ubuntu Karmic,
the printer stopped working.
I ran hp-plugin, and then the printer starts printing, but the pages are
always blank.
** Attachment added: "troubleshoot3.txt"
http://launchpadlibrarian.net/30080785/troubleshoot3.txt
--
cups: no printer output (hp 1020
I changed number-up to 1 in system-config-printer and now everyting
works.
Thank you very much!
(except one certain PDF document that seems to take ages to send to the
printer, and in the mean time, process "gs" (ghostscript?) is using 100%
CPU power)
--
cups: no printer output (hp 1020)
https:
The error_log in your troubleshoot2.txt contains following line:
D [18/Jul/2009:23:24:01 +0200] [Job 15] argv[5]="job-
uuid=urn:uuid:8917bdd0-9cc0-3ccd-7a05-8cb7920df26c number-up=2
orientation-requested=3"
This line shows that your print job was sent with the option "number-
up=2", which means 2
New output of hp-info after installing the HP proprietary firmware.
** Attachment added: "hp-info2.txt"
http://launchpadlibrarian.net/29233899/hp-info2.txt
--
cups: no printer output (hp 1020)
https://bugs.launchpad.net/bugs/401140
You received this bug notification because you are a member o
Now I have run hp-plugin -i and downloaded the firmware form HP.
At the end of the installation the printer made some sounds, but when I print a
page nothing happens.
I ran the printer troubleshooter again and this time a test page was
actually printed, only it was printed half size (as when you
When I execute the hp-info command as root, all but the last line of hp-
info.txt above disappears.
--
cups: no printer output (hp 1020)
https://bugs.launchpad.net/bugs/401140
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bu
** Attachment added: "hp-info.txt"
http://launchpadlibrarian.net/29233612/hp-info.txt
--
cups: no printer output (hp 1020)
https://bugs.launchpad.net/bugs/401140
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
Can you run
hp-info -i -x --id -dhp:/usb/HP_LaserJet_1020?serial=FN07RRW
and post the output here? Does the output contain "FWVER"?
Can you run "hp-plugin" (or if it does not work "hp-plugin -i")? This
installs HP's proprietary plug-in. Does this help?
** Changed in: cups (Ubuntu)
Statu
** Attachment added: "troubleshoot.txt"
http://launchpadlibrarian.net/29228439/troubleshoot.txt
--
cups: no printer output (hp 1020)
https://bugs.launchpad.net/bugs/401140
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bu
** Attachment added: "BootDmesg.txt"
http://launchpadlibrarian.net/29228350/BootDmesg.txt
** Attachment added: "CupsErrorLog.txt"
http://launchpadlibrarian.net/29228353/CupsErrorLog.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/29228358/Dependencies.txt
** A
23 matches
Mail list logo
