** Also affects: baltix
Importance: Undecided
Status: New
--
Remove ZTE Modem ZeroCD from unusual_devs.h
https://bugs.launchpad.net/bugs/373821
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu
** Description changed:
-
- Like discuted here
https://bugs.launchpad.net/ubuntu/+source/hal-info/+bug/305968 the ZTE MF 622
Modem and some others 3G Modens have 2 devices using same USB port, in ZTE MF
622 case: ZeroCD (19d2:2000) and Modem (19d2:0001).
+ Like discuted here https://bugs.l
Can you please delete also all my posts above as they are below the
"fixed & working" 3rd comment.
Regards,
George
--
Remove ZTE Modem ZeroCD from unusual_devs.h
https://bugs.launchpad.net/bugs/373821
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Based on the comment,
https://bugs.edge.launchpad.net/ubuntu/+source/linux/+bug/373821/comments/3
, from @Cleber Santz, the original bug reporter, I'm marking this bug
Fix Released for Karmic. Cleber, feel free to open a bug against udev
for the rule you'd like to see included.
For anyone else s
Just "keep trying",
approx. same behavior with "Linux pc 2.6.30-020630rc8-generic #020630rc8"
Attached before/after boot= 19d2 : 2000
After Eject of sr0= 19d2 : 0031
Loop creates ttyUSB7, 8 and 9, Network Manager stops running, the system
freezes at all, within dmesg found:
option 1-3:1.1 device
This is not a bug in the linux-meta package, moving to the linux
package.
** Package changed: linux-meta (Ubuntu) => linux (Ubuntu)
--
Remove ZTE Modem ZeroCD from unusual_devs.h
https://bugs.launchpad.net/bugs/373821
You received this bug notification because you are a member of Ubuntu
Bugs, wh
And attached here is the full kernel compilation error.
** Attachment added: "kernel compilation errors"
http://launchpadlibrarian.net/27332705/compile_kernel.txt
--
Remove ZTE Modem ZeroCD from unusual_devs.h
https://bugs.launchpad.net/bugs/373821
You received this bug notification because y
Hello all,
I read this bug report and a thousand of howto's on the net but I still can't
get my MF622 working properly.
I'm using Jaunty (fresh install) with Kernel 2.6.28-12-generic on a HP
Pavillion dv2137us. Not sure if I should
post this here or in the original bug report
http://bugs.la
"Frozen" photos:
http://www.acomelectronics.com/GeorgeVita/froz_26_1.jpg
http://www.acomelectronics.com/GeorgeVita/froz_26_2.jpg
http://www.acomelectronics.com/GeorgeVita/froz_26_3.jpg
http://www.acomelectronics.com/GeorgeVita/froz_26_4.jpg
syslog_g (attached)
My notes on "Using ZTE MF636 with va
Hi Cleber,
I firstly "debug" the "debugging instructions" from the wiki!
NO_PUBKEY W: GPG error: http://ddebs.ubuntu.com jaunty
>>> followed instructions from
>>> http://ubuntuforums.org/showpost.php?p=7082357&postcount=2
E: Couldn't find package libnm-util0-dbgsym
>>> I used libnm-util1-dbgsym vi
George,
Install debug symbols and post here the NW backtrace, see
https://wiki.ubuntu.com/DebuggingNetworkManager#Debugging%20Crashes.
--
Remove ZTE Modem ZeroCD from unusual_devs.h
https://bugs.launchpad.net/bugs/373821
You received this bug notification because you are a member of Ubuntu
Bu
Finally I continued with: complete removal of rc7, full 9.04 update
(update manager), shut down, MF636 attached, boot. The ZTEMODEM drive
not shown. Within dmesg I found "usb-storage: device ignored". Stated as
19d2 : 2000 at lsusb. A removal/reinsertion gives:
[ 323.366334] usb 1-3: USB disconne
I continued with the reject and stucked!
What I did: shut down, attach the MF636, boot, ZTEMODEM drive shown to
desktop, wait around 1 minute, eject ZTEMODEM, wait till the wizard
started, setup the new Connection, wizard finished, open a terminal
window, dmesg > dmesg_g12.txt every 5-6 seconds ti
Fresh install from "ubuntu-9.04-desktop-i386.iso" (md5sum=ok) resulting to:
Linux pc 2.6.28-11-generic #42-Ubuntu
Then rc7 kernel installed from
"linux-image-2.6.30-020630rc7-generic_2.6.30-020630rc7_i386.deb", shut down,
boot, uname -a shows:
Linux pc 2.6.30-020630rc7-generic #020630rc7
Shut d
I'm using the 2.6.30 RC7 kernel right now. All working fine.
--
Remove ZTE Modem ZeroCD from unusual_devs.h
https://bugs.launchpad.net/bugs/373821
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@l
George,
Seems that your problem is in "nm-modem-probe"
Pid: 3736, comm: nm-modem-probe Tainted: G D C
(2.6.30-020630rc7-generic #020630rc7) 1000H
Please, check your NetworkManager version/configuration and, if you
could, try the new kernel with a fresh Jaunty installation. Maybe
I do more test today, and now get my modem works fine in RC6. At
afternoon, will try the RC7.
Maybe I don't do the test yesterday so good. Because I don't make
nothing different today, just try again. The modem was detected like a
pen drive, and not like a CD. Just eject the drive and wait about 1
EeePC 1000H, 2GB RAM, Wireless and Bluetooth Enabled, no Ethernet connection,
all previous Connections Deleted to prevent auto connection via wifi and let
the Broadband Wizard begin.
Linux pc 2.6.30-020630rc7-generic #020630rc7
Boot with the ZTE MF636 (original mode 19d2 : 2000) attached
The ZTEM
full file attached, including the looping creation of ttyUSBxx:
dmesg_7.txt
** Attachment added: "dmesg_7.txt"
http://launchpadlibrarian.net/27141620/dmesg_7.txt
--
Remove ZTE Modem ZeroCD from unusual_devs.h
https://bugs.launchpad.net/bugs/373821
You received this bug notification because
George/Danne
Boot with modem connected and after boot run "dmesg > dmesg.txt" and
post dmesg.txt here.
--
Remove ZTE Modem ZeroCD from unusual_devs.h
https://bugs.launchpad.net/bugs/373821
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubun
This image: http://www.acomelectronics.com/GeorgeVita/ZTEMF636_rc7.jpg
shows the last lines of "dmesg" just before the stuck.
--
Remove ZTE Modem ZeroCD from unusual_devs.h
https://bugs.launchpad.net/bugs/373821
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Hi again,
I tested above in ALL possible parameters and did NOT work.
My EeePC 1000H was a -proposed updated "Linux pc 2.6.28-12-generic #43-Ubuntu"
(normal 9.04 and not Netbook remix). Both rc6 and rc7 tested. Possibilities
tried: Wireless enabled/disabled, modem attached before or after boot. E
On Sat, May 23, 2009 at 7:42 PM, GeorgeVita
wrote:
> Hi to all above trying hard for this bug.
>
> Custavo can you please determine if at the above "test procedure" I have to
> install only the:
> linux-image-2.6.30-020630rc6-generic_2.6.30-020630rc6_i386.deb
> or I need also a Header package? If
I've tested the 2.6.30 RC6 kernel and my modem doesn't work. I'm still
in 2.6.28-11, waiting for new RC.
--
Remove ZTE Modem ZeroCD from unusual_devs.h
https://bugs.launchpad.net/bugs/373821
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Hi to all above trying hard for this bug.
Custavo can you please determine if at the above "test procedure" I have to
install only the:
linux-image-2.6.30-020630rc6-generic_2.6.30-020630rc6_i386.deb
or I need also a Header package? If yes which one?
I have a ZTE MF636 and would like to test it o
I'll try this kernel in my notebook monday.
--
Remove ZTE Modem ZeroCD from unusual_devs.h
https://bugs.launchpad.net/bugs/373821
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
h
Yes, with kernel 2.6.30rc6 the modem work's better
--
Remove ZTE Modem ZeroCD from unusual_devs.h
https://bugs.launchpad.net/bugs/373821
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubun
The following has worked for me:
1. install 2.6.30rc6 kernel from
http://kernel.ubuntu.com/~kernel-ppa/mainline/v2.6.30-rc6/ in jaunty
2. reboot, gnome starts up
3. insert ZTE MF636 USB modem
4. wait icon to appear on desktop then "Eject volume"
5. wait around 30s for Network Manager to show dev
Danne,
Com esses novos Kernels (2.6.29 e superior) o seu modem é montado primeiro
como um CD, você precisa ejeta-lo para poder usar o modem, a regra do UDEV
somente automatiza este trabalho. Se você não quiser usar a regra UDEV você
pode fazer isso manualmente:
execute "dmesg | grep scsi" e pro
Thanks. I do the tests. Install the .debs (i386) and reboot. Choose the
new kernel to boot and wait. All ok at here. Plug the modem and wait...
Nothing happens, continues 19d2:2000. Use the udev rule and reboot. At
boot my cd drive open (O.o). At the session I plug the modem again and
wait, ok now
Danne,
You can test it in Jaunty with "Mainline" kernel's, go to
http://kernel.ubuntu.com/~kernel-ppa/mainline/v2.6.29.3/ and install
this files:
linux-headers-2.6.29-02062903_2.6.29-02062903_all.deb
linux-headers-2.6.29-02062903-generic_2.6.29-02062903_amd64.deb
linux-image-2.6.
... change the Jaunty* ...
--
Remove ZTE Modem ZeroCD from unusual_devs.h
https://bugs.launchpad.net/bugs/373821
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubun
OK, I installed the Karmic and did the tests. With a simple instalation,
the modem has no detected, even conected in boot or in session. With the
udev rule, it are detected in both case =]
I'm thinking about change the Ibex to Karmic already =P
Thanks to all developers and to Cleber to report thi
I have found the solution :D
the problem is on the network manager, the version 0.7.1 is only RC and don't
detect the device.
Just downgrade to 0.7.0 and use gcom to register your modem in the network
"sudo /usr/bin/gcom -d /dev/ttyUSB2"
if you want to plug the modem with the pc turned on upgrade
I having some problems with Karmic, so to test it i have installed the
Karmic kernel on Jaunty, install this packages :
http://packages.ubuntu.com/karmic/linux-image-2.6.30-5-generic and
http://packages.ubuntu.com/karmic/wireless-crda.
Remember !!! Make this at your own risk !!!
--
Remove ZTE M
I'll install Karmic today in a pc from my work to test. Frist with not
udev rule, and after with on in /etc/udev/rules.d/. brb.
--
Remove ZTE Modem ZeroCD from unusual_devs.h
https://bugs.launchpad.net/bugs/373821
You received this bug notification because you are a member of Ubuntu
Bugs, which i
Hello,
Seens that the code above are removed from unusual_devs.h in Karmic
2.6.30-5-generic
++
/* Reported by Mauro Andreolini
* This entry is needed to bypass the ZeroCD mechanism
* and to properly load as a modem device.
*/
/*UNUSUAL_DEV( 0x19d
Hello
I have a peculiar situation in my Ubuntu 9.04 with kernel 2.6.29.03 that is
already with the code
UNUSUAL_DEV( 0x19d2, 0x2000, 0x, 0x,
"Onda ET502HS",
"USB MMC Storage",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_D
This happen with me too. I try compile the kernel, but haven't free disk
space to do. Hope a fix in the next kernel, I think this can be easy to
do.
--
Remove ZTE Modem ZeroCD from unusual_devs.h
https://bugs.launchpad.net/bugs/373821
You received this bug notification because you are a member of
39 matches
Mail list logo
