10.04: it works!
GNOME up and running out of the box, both in live session and after
installation. The "netbook 2d" session/launcher is also working, while
the standard (non-EFL) netbook launcher doesn't work.
There's still a frequency/whatever problem while booting, between GRUB
and GDM (usplash
I'm seeing pretty much the same behaviour as previously described.
Environment is a GA-PCV2 Idot motherboard with VIA PC-1000
Samuel2/VT8235M/CLE233. None of the Ubuntu 8 or 9 versions which I
have run get as far as a working GUI, even for the installer. I tested
also with a PCI video card, whic
We're closing this bug since it is has been some time with no response from the
original reporter. However, if the issue still exists please feel free to
reopen with the requested information. Also, if you could, please test against
the latest development version of Ubuntu, since this confirm
** Changed in: xserver-xorg-video-openchrome (Ubuntu)
Status: Confirmed => Incomplete
** Changed in: xserver-xorg-video-openchrome (Ubuntu)
Importance: Undecided => High
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchpad.net/bugs/197514
You received this b
To workaround your problem, please add following line into your
xorg.conf:
Option "ActiveDevice" "CRT"
or
Option "ActiveDevice" "LCD"
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchpad.net/bugs/197514
You received this bug notification because you are a member of
The VIA driver is "not found" since it was removed with 8.10, see
https://help.ubuntu.com/community/OpenChrome
The openchrome driver fails, log attached.
** Attachment added: "X11 log of openchrome failing at it"
http://launchpadlibrarian.net/25954553/Xorg.0.log
--
VIA/S3G VT8623 [Apollo CLE
> Short version: 9.04, broken.
>
Yes, and in several respects, suspend/restore broken on a HP-Compaq 6720
too.
Starts with a command line too, then wait and goes to a menu without PF
keys and starts up wrong language and keyboard, then concludes in 800 x 600.
--
VIA/S3G VT8623 [Apollo CLE2
Short version: 9.04, broken.
I just found out I have a laptop with this hardware and I need to have
it working by next week. Cool. Tried to boot gNewSense 2.2 live session:
nothing can be seen on screen. Tried to boot Ubunt 8.04, same behaviour
(well, since they are almost the same thing, I was ki
** Attachment added: "X11 log of trying with André's xorg.conf"
http://launchpadlibrarian.net/25937931/IB-0004-Xorg.0.log.2
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchpad.net/bugs/197514
You received this bug notification because you are a member of Ubuntu
Bu
** Attachment added: "Jaunty-generated xorg.conf"
http://launchpadlibrarian.net/25937849/IB-0002-xorg.conf
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchpad.net/bugs/197514
You received this bug notification because you are a member of Ubuntu
Bugs, which is subs
As of late 8.10 beta tests, the only improvement is a tiny bit at Live
CD startup.
Live CD now starts in graphic menu mode, but continues to install
800x600 system.
Installed system works, but 800x600 and 600x480 are the only mode to
choose from.
Workarounds: stay at 7.04 or applying my xorg.co
no need to keep open for xorg.
** Changed in: xorg (Ubuntu)
Status: New => Invalid
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchpad.net/bugs/197514
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
-
** Tags added: valid-xorg-conf
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchpad.net/bugs/197514
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
htt
Has there been any resolution to this issue? I recently built a system
with a VT8623 and am having pretty much the exact same problem.
I would be happy to help troubleshoot the issue, if there is anything I
can do...
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchp
To make it clear about 'Option "UseFBDev" "true"': it wasn't in the first
autoconfiged xorg.conf (first backup) but it was in the xorg.conf (second
backup) that resulted from my first booting in recovery mode and selecting xfix.
I never added it myself and it never appeared again later, even by u
To make it clear about 'Option "UseFBDev" "true"': it wasn't in the first
autoconfiged xorg.conf (first backup) but it was in the xorg.conf (second
backup) that resulted from my first booting in recovery mode and selecting xfix.
I never added it myself and it never appeared again later, even by u
** Attachment added: "xorg.conf"
http://launchpadlibrarian.net/13051256/xorg.conf
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchpad.net/bugs/197514
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ub
** Attachment added: "Xorg.0.log.old"
http://launchpadlibrarian.net/13051275/Xorg.0.log.old
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchpad.net/bugs/197514
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubunt
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/13051281/Xorg.0.log
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchpad.net/bugs/197514
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Attachment added: "logs.tar.gz"
http://launchpadlibrarian.net/13051338/logs.tar.gz
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchpad.net/bugs/197514
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Could you add 'Option "ModeDebug" "true"' to the Device section of the
vanilla (=non-working) xorg.conf and attach the resulting Xorg.0.log.
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchpad.net/bugs/197514
You received this bug notification because you are a member
So adding the 'Option "UseFBDev" "true"' made it work? What if you don't
use a framebuffer at all, or is it even possible?
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchpad.net/bugs/197514
You received this bug notification because you are a member of Ubuntu
Bugs, w
** Attachment added: "xorg.conf"
http://launchpadlibrarian.net/12955763/xorg.conf
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchpad.net/bugs/197514
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ub
** Attachment added: "xorg.conf.20080328224124"
http://launchpadlibrarian.net/12955751/xorg.conf.20080328224124
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchpad.net/bugs/197514
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I think I have seen & misplaced a message saying this bug is corrected.
There is a change in 8.04 beta regarding it indeed.
But the problem got worse, I'm afraid.
(1) Desktop Live CD still starts in line mode, not character fullscreen.
(2) After boot progress bar screen disappears
- Either the
** Changed in: xserver-xorg-video-openchrome (Ubuntu)
Status: Incomplete => Confirmed
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchpad.net/bugs/197514
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Xorg.0.log for 7.04 for comparison.
"incomplete status" still there? :-)
Les petits ruisseaux font les grandes rivières.
Thanks. André.
** Attachment added: "Xorg.7.04.log"
http://launchpadlibrarian.net/12374730/Xorg.7.04.log
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://
/Xorg.0.log for 8.04a5. Note the number of
"Not using default mode "1024x768" (hsync out of range)"
messages apparently being the source of the problem.
Cheers.
André.
** Attachment added: "Xorg.8.04a5.log"
http://launchpadlibrarian.net/12374709/Xorg.8.04a5.log
--
VIA/S3G VT8623 [Apollo CLE
** Attachment added: "xorg_new.conf"
http://launchpadlibrarian.net/12371379/xorg_new.conf
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://bugs.launchpad.net/bugs/197514
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Timo Aaltonen wrote:
> So only changing the xorg.conf made it work right? Please attach the
> working version.
>
Right, right.
Here is the working version.
Please remember it's made of two parts :
1) beginning built by 8.04a5
2) screen related rest taken from 7.04,
overlaid starting at Section "
So only changing the xorg.conf made it work right? Please attach the
working version.
** Changed in: xserver-xorg-video-openchrome (Ubuntu)
Sourcepackagename: xorg => xserver-xorg-video-openchrome
Status: New => Incomplete
--
VIA/S3G VT8623 [Apollo CLE266] display no longer works
https://
31 matches
Mail list logo
