could not retrieve logs; found them using Ctrl-Shift-F1 (via terminal)
while error is on screen. need some way to copy logfiles to a safe place
as they get deleted even on hard reset. might try to copy logfiles to
filesystem root.
at the same time, found a workaround: unplugging the network cable
Public bug reported:
- message box on fresh ubuntu/wubi on Win7 install:
"Could not initialize the package information
An unresolvable problem occurred while initializing the package information.
Please report this bug against the 'update-manager' package and include the
following error message:
Public bug reported:
- dual-boot along Win7
- wubi install (11.04-desktop-amd64) always crashes while "Checking for
packages to remove..."
- message box:
"Installation failed
The installer encountered an unrecoverable error and will now reboot. [OK]"
- opened \ubuntu\disks\root.disk with ext2expl
Installed 2.6.36 and it didn't fix the problem for me. But in my case
this is because I have a manual addition to xorg.conf:
Section "InputDevice"
Identifier "TouchAsusET2002T"
Driver "evtouch"
Option "device" "/dev/input/evtouch-AsusET2002T"
In my specific case, the devices I use are ZWave, and they have this
habit of sharing USB ID with genuine serial cables.
But that doesn't matter. Network-manager made one of my genuine serial
cables unusable, which means that even if it had an old serial modem
attached it would probably prevent me
The devices I tested this with are (from lsusb):
ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device
ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
That commit doesn't include any of these. The first two are Z
** Also affects: network-manager
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/700316
Title:
usbserial stopped working during a recent upgrade, no serial
Public bug reported:
Binary package hint: network-manager
In Ubuntu and Kubuntu 10.10, and 11.04 alpha1, network-manager breaks
usb serial. I assume its looking for a USB modem or broadband device and
on of the tests does this. Removing the package network-manager fixes
the issue.
Also reported
Purged network-manager and all packages depending on it, rebooted, and
the serial devices seem fine now without the reloading of usbserial. I
can't use it properly in Kubuntu anyway, so bye bye it goes. I was
keeping it under the impression that it will pull kubuntu-desktop with
it, but it didn't!
The network-manager + network-manager-gnome hypothesis may not be true.
I encountered this problem with Kubuntu 10.10, which doesn't have the
network-manager-gnome package installed. LiveCD test is enough.
How I did the test:
strace cat /dev/ttyUSB0
When it doesn't work, it gets stuck at:
Public bug reported:
Binary package hint: parcellite
I just did something and triggered a bug that makes parcellite unusable:
it won't respond anymore (even when killed and restarted), and it uses
100%.
Luckily, this seems to have been fixed recently in 0.9.3:
http://parcellite.sourceforge.net/?
Public bug reported:
These lines are in libupnp-1.6.6/upnp/src/api/upnptools.c
// There is some unnecessary allocation and
// deallocation going on here because of the way
// resolve_rel_url was originally written and used
// in the future it would be nice to clean this up
I was
Sorry, I totally forgot about this bug report.
I just tested the machine in question with Ubuntu 10.04 and the
backlight stays on when X starts on the Live CD (intel driver).
xbacklight says "No outputs have backlight property", but that's not
such a big issue.
--
asus eeetop backlight needs ker
Still no ideas on this one huh?
More info:
* If I start typing before the desktop-to-desktop transition slide finishes,
and this bug decides to occur, the first 1-2 keys do get painted in the field
I'm typing in, but then the slide transition finishes and the window stops
updating until I swit
To make a note, in parallel with the screen not repainting, I also lose
keyboard events on the machine where I get these symptoms. On the
machine where I don't get the repaint issue, I don't lose keyboard
events either.
Does this ring any bells in order to triage this report better?
The lost keyb
Latest updates didn't fix it.
As an addition, if I don't notice that nothing is repainting, and I
press Alt+F4 just after Alt+Tab (to close Gnome Calculator in this
case), the closed window goes away as far as X is concerned (the mouse
cursor behaves correctly for the window underneath, and all th
apport information
** Attachment added: "glxinfo.txt"
http://launchpadlibrarian.net/49614973/glxinfo.txt
--
Windows don't repaint after alt+tab, desktop switch (compiz, nvidia)
https://bugs.launchpad.net/bugs/583401
You received this bug notification because you are a member of Ubuntu
Bugs, w
apport information
** Attachment added: "XsessionErrors.txt"
http://launchpadlibrarian.net/49614972/XsessionErrors.txt
--
Windows don't repaint after alt+tab, desktop switch (compiz, nvidia)
https://bugs.launchpad.net/bugs/583401
You received this bug notification because you are a member of
apport information
** Attachment added: "Xrandr.txt"
http://launchpadlibrarian.net/49614969/Xrandr.txt
--
Windows don't repaint after alt+tab, desktop switch (compiz, nvidia)
https://bugs.launchpad.net/bugs/583401
You received this bug notification because you are a member of Ubuntu
Bugs, whi
apport information
** Attachment added: "XorgLog.txt"
http://launchpadlibrarian.net/49614966/XorgLog.txt
--
Windows don't repaint after alt+tab, desktop switch (compiz, nvidia)
https://bugs.launchpad.net/bugs/583401
You received this bug notification because you are a member of Ubuntu
Bugs, w
apport information
** Attachment added: "XorgLogOld.txt"
http://launchpadlibrarian.net/49614967/XorgLogOld.txt
--
Windows don't repaint after alt+tab, desktop switch (compiz, nvidia)
https://bugs.launchpad.net/bugs/583401
You received this bug notification because you are a member of Ubuntu
B
apport information
** Attachment added: "XorgConf.txt"
http://launchpadlibrarian.net/49614964/XorgConf.txt
--
Windows don't repaint after alt+tab, desktop switch (compiz, nvidia)
https://bugs.launchpad.net/bugs/583401
You received this bug notification because you are a member of Ubuntu
Bugs,
apport information
** Attachment added: "UdevLog.txt"
http://launchpadlibrarian.net/49614963/UdevLog.txt
--
Windows don't repaint after alt+tab, desktop switch (compiz, nvidia)
https://bugs.launchpad.net/bugs/583401
You received this bug notification because you are a member of Ubuntu
Bugs, w
apport information
** Attachment added: "UdevDb.txt"
http://launchpadlibrarian.net/49614928/UdevDb.txt
--
Windows don't repaint after alt+tab, desktop switch (compiz, nvidia)
https://bugs.launchpad.net/bugs/583401
You received this bug notification because you are a member of Ubuntu
Bugs, whi
apport information
** Attachment added: "ProcModules.txt"
http://launchpadlibrarian.net/49614922/ProcModules.txt
--
Windows don't repaint after alt+tab, desktop switch (compiz, nvidia)
https://bugs.launchpad.net/bugs/583401
You received this bug notification because you are a member of Ubuntu
apport information
** Attachment added: "ProcInterrupts.txt"
http://launchpadlibrarian.net/49614919/ProcInterrupts.txt
--
Windows don't repaint after alt+tab, desktop switch (compiz, nvidia)
https://bugs.launchpad.net/bugs/583401
You received this bug notification because you are a member of
apport information
** Attachment added: "ProcCpuinfo.txt"
http://launchpadlibrarian.net/49614917/ProcCpuinfo.txt
--
Windows don't repaint after alt+tab, desktop switch (compiz, nvidia)
https://bugs.launchpad.net/bugs/583401
You received this bug notification because you are a member of Ubuntu
apport information
** Attachment added: "Lspci.txt"
http://launchpadlibrarian.net/49614914/Lspci.txt
--
Windows don't repaint after alt+tab, desktop switch (compiz, nvidia)
https://bugs.launchpad.net/bugs/583401
You received this bug notification because you are a member of Ubuntu
Bugs, which
apport information
** Attachment added: "GconfCompiz.txt"
http://launchpadlibrarian.net/49614910/GconfCompiz.txt
--
Windows don't repaint after alt+tab, desktop switch (compiz, nvidia)
https://bugs.launchpad.net/bugs/583401
You received this bug notification because you are a member of Ubuntu
apport information
** Attachment added: "CurrentDmesg.txt"
http://launchpadlibrarian.net/49614904/CurrentDmesg.txt
--
Windows don't repaint after alt+tab, desktop switch (compiz, nvidia)
https://bugs.launchpad.net/bugs/583401
You received this bug notification because you are a member of Ubun
apport information
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/49614905/Dependencies.txt
--
Windows don't repaint after alt+tab, desktop switch (compiz, nvidia)
https://bugs.launchpad.net/bugs/583401
You received this bug notification because you are a member of Ubun
apport information
** Tags added: apport-collected
** Description changed:
Binary package hint: compiz
I upgraded from Ubuntu 9.10 to Ubuntu 10.04, and since then I seem to be
getting a strange artefact.
When I switch windows with Alt+Tab, regardless of the used switcher (I
used
** Description changed:
Binary package hint: compiz
I upgraded from Ubuntu 9.10 to Ubuntu 10.04, and since then I seem to be
getting a strange artefact.
When I switch windows with Alt+Tab, regardless of the used switcher (I
used both the Ring Switcher and the Static Application Swi
** Description changed:
Binary package hint: compiz
I upgraded from Ubuntu 9.10 to Ubuntu 10.04, and since then I seem to be
getting a strange artefact.
- When I switch Windows with Alt+Tab, regardless of the used switcher (I
+ When I switch windows with Alt+Tab, regardless of the used
Public bug reported:
Binary package hint: compiz
I upgraded from Ubuntu 9.10 to Ubuntu 10.04, and since then I seem to be
getting a strange artefact.
When I switch Windows with Alt+Tab, regardless of the used switcher (I
used both the Ring Switcher and the Static Application Switcher so far),
so
Installing the package texlive-base seems to fix this issue. Should it
be a dependency?
--
package tex-common 2.06 failed to install/upgrade: subprocess installed
post-installation script returned error exit status 1
https://bugs.launchpad.net/bugs/580881
You received this bug notification becau
Something like this just crept into Karmic, except the workaround
doesn't fix it. Just noticed it tonight.
--
[jaunty regression] Pulse Audio finds no card for output
https://bugs.launchpad.net/bugs/322374
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
I think this information may be useful: I'm running Karmic's stock Wine
with the ESounD driver just fine (i.e. PulseAudio's ESounD emulation
rather than wine-pulse drivers). I had the same ALSA issue as others, I
also tried Wine 1.2 + Wine-Pulse from PPA, but I'm back to 1.0.1 because
1.2 doesn't p
ESounD emulation in PulseAudio seems to do the trick, using the ESounD
driver that Wine already ships with.
Also, possible duplicate: #437749
--
use wine-pulse for wine-packages
https://bugs.launchpad.net/bugs/488981
You received this bug notification because you are a member of Ubuntu
Bugs, whi
You can always use PulseAudio's ESounD emulation by telling Wine to use
the ESounD driver. Works great for me under Karmic.
--
Ubuntu should ship wine with the wine-pulse patches
https://bugs.launchpad.net/bugs/437749
You received this bug notification because you are a member of Ubuntu
Bugs, whi
That SIGTERM is mine. I sent it.
--
transcode freezes at 99%
https://bugs.launchpad.net/bugs/528875
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailma
>From the log:
[framebuffer.c] (V|retrieve) requesting a new video frame
[framebuffer.c] got a new video frame reference: 0x9790f18
[[34;1mencoder-buffer.c[0m] got frame 0x9790f18 (id=1251)
[framebuffer.c] (A|retrieve) requesting a new audio frame
[framebuffer.c] (A|retrieve) audio frame not rea
Stack trace with unstripped symbols and -O0
Thread 3 (Thread 0xa5768b70 (LWP 15603)):
#0 0x00e94422 in __kernel_vsyscall ()
#1 0x00e55611 in pause () from /lib/tls/i686/cmov/libpthread.so.0
#2 0x0807089b in tc_socket_wait () at socket.c:842
#3 0x0804fcee in event_thread (blocked_=0xbf7fe490) a
Thread 2 (Thread 0xa479eb70 (LWP 17259)):
#0 0x00c46422 in __kernel_vsyscall ()
#1 0x003a8e15 in pthread_cond_wait@@GLIBC_2.3.2 () from
/lib/tls/i686/cmov/libpthread.so.0
#2 0x08060a8c in aframe_reserve ()
#3 0x0805f9b7 in ?? ()
#4 0x003a480e in start_thread () from /lib/tls/i686/cmov/libpthr
Public bug reported:
Binary package hint: transcode
I installed dvd::rip today, which uses transcode to create the AVI
files. I'm using 2-pass encoding, and quite a lot of the time transcode
freezes at 99% on the first pass.
gdb shows three threads when transcode is in this state: two threads ar
I'm not sure if this helps anyone, but I landed here after running out
of RAM and swap space. I'm not using Evolution at all, but I am using
Pidgin. The gang of three, made up by Pidgin, Notify-OSD, and Evolution-
Data-Server, were eating all my RAM. Now, I see that Notify-OSD has been
fixed in Kar
Point to the bug which the initial bug report was marked a duplicate of
** Changed in: xserver-xorg-video-intel
Bugwatch: freedesktop.org Bugzilla #18889 => freedesktop.org Bugzilla
#11645
Status: Invalid => Unknown
--
asus eeetop backlight needs kernel support
https://bugs.launchpa
Public bug reported:
The Ubuntu 8.10 network manager's wireless scan is lagging. It was fine
in 8.04
Here's what happens:
I'm in location A, with a bunch of wireless networks, and I attach to
one of them. I do my stuff, etc. etc. After a while I put my laptop into
suspend mode and go to location
Public bug reported:
Binary package hint: initramfs-tools
Hi,
Files placed in the scripts directory can no longer have a dot in their
names (i.e. no script.sh files in there). This worked in Hardy. Is there
a reason for this?
A friend pasted me this patch, but I think it may need more than just
49 matches
Mail list logo
