ught the I2C to TWL4030 is
initialized by the ROM code.
And why can the SPL read the u-boot.img in the next step?
Thomas
Cc: Thomas Weber
Cc: Steve Sakoman
Original patch for Beagleboard is:
Signed-off-by: Peter Meerwald
Extended to cover all other boards:
Signed-off-by: Tom Rini
---
inc
Signed-off-by: Thomas Weber
---
include/configs/omap4_common.h |2 +-
include/configs/omap5_evm.h|2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index a989721..390ee8a 100644
--- a/include/configs
Ccing Albert
Thomas
On 04/02/2012 01:58 PM, Thomas Weber wrote:
> From: Bernhard Walle
>
> In addition to the error message also display the error code. I had the
> problem that my malloc memory was not enough (ENOMEM), and if u-boot
> had displayed the error code immediately
Am 08.09.2010 22:05, schrieb Paulraj, Sandeep:
>
>
>> Yes, I know.
>>
>> The problem we're discussing is that the version of mach-types.h as
>> included in the mainline LInux kernel tree is relatively old when
>> compared to the current state of the ARM machine registry. The
>> question was if w
This patch updates the mach-types.h based on the latest linux kernel
Signed-off-by: Thomas Weber
---
arch/arm/include/asm/mach-types.h | 1230 -
1 files changed, 1226 insertions(+), 4 deletions(-)
diff --git a/arch/arm/include/asm/mach-types.h
b/arch/arm
Am 07.09.2010 16:28, schrieb Eric Cooper:
> This patch series adds support for the Seagate FreeAgent DockStar.
> The DockStar is almost identical to the Marvell SheevaPlug,
> but has 256M of NAND flash, 128M of SDRAM, and different LED pins.
>
> A new machine ID (2998) has already been registered
The version numbering scheme was changed in Oct, 2008.
This patch brings the documentation to the actual level.
The description is taken from:
http://www.denx.de/wiki/U-Boot/ReleaseCycle
Signed-off-by: Thomas Weber
---
README | 18 ++
1 files changed, 10 insertions(+), 8
Signed-off-by: Thomas Weber
---
board/bmw/bmw.c |1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/board/bmw/bmw.c b/board/bmw/bmw.c
index 4039145..5ba6c09 100644
--- a/board/bmw/bmw.c
+++ b/board/bmw/bmw.c
@@ -22,7 +22,6 @@
*/
#include
-#include
#include
#include
Signed-off-by: Thomas Weber
---
arch/arm/cpu/ixp/npe/IxNpeDlNpeMgr.c |5 -
1 files changed, 0 insertions(+), 5 deletions(-)
diff --git a/arch/arm/cpu/ixp/npe/IxNpeDlNpeMgr.c
b/arch/arm/cpu/ixp/npe/IxNpeDlNpeMgr.c
index f5a4c5f..a9ea8bc 100644
--- a/arch/arm/cpu/ixp/npe/IxNpeDlNpeMgr.c
Signed-off-by: Thomas Weber
---
0 files changed, 0 insertions(+), 0 deletions(-)
mode change 100755 => 100644 arch/arm/cpu/armv7/imx-common/timer.c
mode change 100755 => 100644 drivers/fpga/ivm_core.c
mode change 100755 => 100644 include/lattice.h
diff --git a/arch/arm/cpu/armv7/i
Hello Chandan,
On 10.01.2012 07:38, Chandan Nath wrote:
> This patch is added to replace CONFIG_AM335X symbol
> with CONFIG_AM333XX for AM33XX platforms.
>
One 3 in CONFIG_AM333XX too much, but only in description.
It runs on the Beaglebone.
Tested-by: Thomas Weber
Thanks.
Thomas
>
From: Thomas Weber
Tricorder is a board which is very similar to the Devkit8000. It
is designed as a base platform for further medical devices.
www.corscience.de/en/medical-engineering/products/multiparameter/mp10-board.html
Signed-off-by: Thomas Weber
---
Sorry for the long time between V1
Adding CONFIG_MTD_ECC_SOFT to config file fixes this problem.
Signed-off-by: Thomas Weber
---
include/configs/tricorder.h |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index f87696b..0e8003f 100644
--- a
This patch removes ONFIG_SYS_NAND_ECCSTEPS and
CONFIG_SYS_NAND_ECCTOTAL from tricorder config.
The ecc data are stored on stack after:
commit 25efd99dbb1352314c9eacdfae42064c2ca15499
nand_spl: store ecc data on the stack
Signed-off-by: Thomas Weber
---
include/configs/tricorder.h |5
Because the tricorder uses the CONFIG_OMAP_HSMMC the
initialization command is mmc rescan and not mmc init.
Signed-off-by: Thomas Weber
---
include/configs/tricorder.h |7 ---
1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/include/configs/tricorder.h b/include/configs
Signed-off-by: Thomas Weber
---
include/configs/mcx.h |5 -
include/configs/omap3_overo.h |4
include/configs/tricorder.h |5 -
3 files changed, 0 insertions(+), 14 deletions(-)
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 0940e86..f3d26ea
Signed-off-by: Thomas Weber
---
0 files changed, 0 insertions(+), 0 deletions(-)
mode change 100755 => 100644 arch/arm/cpu/armv7/imx-common/timer.c
mode change 100755 => 100644 drivers/fpga/ivm_core.c
mode change 100755 => 100644 include/lattice.h
diff --git a/arch/arm/cpu/armv7/i
Hello Rachna,
On 01/23/2012 10:44 AM, Patil, Rachna wrote:
Existing OMAP I2C driver does not support address
length greater than one. Hence this patch is to
add support for 2 byte address read/write.
Signed-off-by: Philip, Avinash
Signed-off-by: Hebbar, Gururaja
Signed-off-by: Patil, Rachna
---
Hello Rachna,
I get multiple timeouts from wait_for_status_mask() during i2c_write(),
line 481.
The Result is 1410h und status_mask is 7h.
I use a devkit8000, booting from sd-card.
Regards,
Thomas
U-Boot SPL 2011.12-00323-g9a3aae2-dirty (Feb 17 2012 - 09:30:36)
Texas Instruments Revision de
Hello Rachna,
On 17.02.2012 10:37, Patil, Rachna wrote:
> Hi Thomas,
>
> On Fri, Feb 17, 2012 at 14:32:02, Thomas Weber wrote:
>> Hello Rachna,
>>
>> I get multiple timeouts from wait_for_status_mask() during i2c_write(),
>> line 481.
>>
>> The R
Hello Stefano,
On 02/04/2012 11:22 AM, Stefano Babic wrote:
From: Simon Schwarz
Linux crashes if the GPMC isn't configured for the dm9000.
Signed-off-by: Simon Schwarz
CC: Tom Rini
CC: Stefano Babic
CC: Wolfgang Denk
---
arch/arm/include/asm/omap_common.h |2 ++
board/timll/devkit8000/d
On 02/04/2012 11:22 AM, Stefano Babic wrote:
From: Simon Schwarz
This adds a spl command to the u-boot.
Related config:
CONFIG_CMD_CPL
activate/deactivate the command
CONFIG_CMD_SPL_NAND_OFS
Offset in NAND to use
Signed-off-by: Simon Schwarz
CC: Tom Rini
CC: Stefano Babic
CC: W
Hello Tom, hello Rachna,
I don't know if this is related to the i2c changes or mmc changes?
When I boot from nand and then make "mmc rescan" the card is not detected.
When booting with boot_key on Devkit8000 directly from sd-card
everything is okay.
Thomas
Log below:
U-Boot SPL 2011.12-003
Hello Tom,
On 02/20/2012 11:23 PM, Tom Rini wrote:
On Sun, Feb 19, 2012 at 10:44:52AM +0100, Thomas Weber wrote:
Hello Tom, hello Rachna,
I don't know if this is related to the i2c changes or mmc changes?
When I boot from nand and then make "mmc rescan" the card is not detecte
This patch removes the definition of stack sizes for
irq and fiq if the CONFIG_USE_IRQ is undefined before.
Acked-by: Igor Grinberg
Signed-off-by: Thomas Weber
---
Changelog v1->v2
Add maintainers of boards as suggested by Igor.
Add Acked-by from Igor
include/conf
This patchset removes some unused definitions from the config files.
It is mostly omap3 centred.
Changelog v1->v2
Add maintainers of boards as suggested by Igor.
Add Acked-by from Igor
Thomas Weber (3):
ARM: OMAP3: Remove unused define CONFIG_OMAP3430
ARM: OMAP3: Rem
This patch removes the CONFIG_OMAP3430, because it is unused.
Acked-by: Igor Grinberg
Signed-off-by: Thomas Weber
---
Changelog v1->v2
Add maintainers of boards as suggested by Igor.
Add Acked-by from Igor
include/configs/cm_t35.h |1 -
include/configs/devkit8
This patch removes the unused definition of SDRC_R_C_B
from the config files.
Acked-by: Igor Grinberg
Signed-off-by: Thomas Weber
---
Changelog v1->v2
Add maintainers of boards as suggested by Igor.
Add Acked-by from Igor
include/configs/am3517_crane.h |1 -
incl
This patchset removes some unused definitions from the config files.
It is mostly omap3 centred.
Changelog
v1->v2
Cc:ed board maintainers
v2->v3
Remove comment and empty line around removed definition
Thomas Weber (3):
ARM: OMAP3: Remove unused define CONFIG_OMAP3430
This patch removes the CONFIG_OMAP3430, because it is unused.
Acked-by: Enric Balletbo i Serra
Acked-by: Tom Rini
Acked-by: Igor Grinberg
Signed-off-by: Thomas Weber
---
include/configs/cm_t35.h |1 -
include/configs/devkit8000.h |1 -
include/configs/dig297.h
This patch removes the unused definition of SDRC_R_C_B
from the config files.
Acked-by: Enric Balletbo i Serra
Acked-by: Igor Grinberg
Signed-off-by: Thomas Weber
---
Changelog
v2->v3
Remove comment and empty line around removed definition too
include/configs/am3517_cran
This patch removes the definition of stack sizes for
irq and fiq if the CONFIG_USE_IRQ is undefined before.
Acked-by: Enric Balletbo i Serra
Acked-by: Tom Rini
Acked-by: Igor Grinberg
Signed-off-by: Thomas Weber
---
include/configs/am3517_crane.h |4
include/configs/am3517_evm.h
Signed-off-by: Thomas Weber
---
MAINTAINERS |8
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index f6f6b72..6ea465d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -696,10 +696,6 @@ Chander Kashyap
Torsten Koschorrek
scb9328
MALLOC_START 0x8020
> #define CONFIG_SYS_SPL_MALLOC_SIZE 0x10/* 1 MB */
>
> #endif /* __CONFIG_H */
Tested-by: Thomas Weber
boots from NAND and from MMC now, on both Devkit8000 versions (128 MiB
and 256 MiB).
Thomas
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signed-off-by: Thomas Weber
---
Changelog:
v2: Remove DEBUG definition instead of commenting
common/env_nand.c |2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/common/env_nand.c b/common/env_nand.c
index ce13def..3cb75c8 100644
--- a/common/env_nand.c
AND_U_BOOT_OFFS 0x8
> #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x20
>
> -#define CONFIG_SYS_SPL_MALLOC_START 0x80108000
> +#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
> #define CONFIG_SYS_SPL_MALLOC_SIZE 0x10/* 1 MB */
>
> #endif /* __CONFIG_H */
Tested-by
Use enable_gpmc_cs_config instead of local writing
timing configuration for GPMC.
Signed-off-by: Thomas Weber
---
board/timll/devkit8000/devkit8000.c | 19 ---
1 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/board/timll/devkit8000/devkit8000.c
b/board/timll
Hello Tom,
On 07.12.2011 18:14, Tom Rini wrote:
> On Wed, Dec 7, 2011 at 2:38 AM, Thomas Weber wrote:
>> Use enable_gpmc_cs_config instead of local writing
>> timing configuration for GPMC.
>>
>> Signed-off-by: Thomas Weber
>> ---
>> boa
Use enable_gpmc_cs_config instead of local writing
timing configuration for GPMC.
Signed-off-by: Thomas Weber
---
Changelog
v2: Change gpmc_net_config[6] to 0, because it is calculated
in enable_gpmc_cs_config
board/timll/devkit8000/devkit8000.c | 19
Tricorder is a board which is very similar to the Devkit8000. It
is designed as a base platform for further medical devices.
www.corscience.de/en/medical-engineering/products/multiparameter/mp10-board.html
Signed-off-by: Thomas Weber
---
MAINTAINERS|1 +
board
This patch removes the unused definitions:
CONFIG_OMAP3_MICRON_DDR
CONFIG_OMAP3_NUMONYX_DDR
CONFIG_OMAP3_INFINEON_DDR
Signed-off-by: Thomas Weber
---
include/configs/cm_t35.h|3 ---
include/configs/dig297.h|3 ---
include/configs/igep0020.h |3 ---
include
This patch removes the unused definitions:
CONFIG_OMAP3_MICRON_DDR
CONFIG_OMAP3_NUMONYX_DDR
CONFIG_OMAP3_INFINEON_DDR
Acked-by: Igor Grinberg
Acked-by: Luca Ceresoli
Signed-off-by: Thomas Weber
---
Changes: Added received acked-by's
include/configs/cm_t35.h|3 ---
include/co
Hello Andreas,
I have the following problem when switching from nandecc hw hamming to
nandecc hw bch8.
Thomas
---8<--
U-Boot 2013.04-rc2-6-g9abd2ec (Apr 05 2013 - 09:58:48)
OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz
OMAP3 DevKit8000 + LPDDR/NAND
I2C: ready
D
Hello Andreas,
On 04/03/2013 04:50 PM, Andreas Bießmann wrote:
> The kernel states:
>
> ---8<---
> The OMAP3 GPMC hardware BCH engine computes remainder polynomials, it does not
> provide automatic error location and correction: this step is implemented
> using
> the BCH library.
> --->8---
>
> A
t; In order to switch between differnet ECC algorithms we need to change the
> interface of omap_nand_switch_ecc() also.
>
> Signed-off-by: Andreas Bießmann
> Cc: Tom Rini
> Cc: Thomas Weber
> ---
> new in v2
>
> since v2:
> * use void omap_nand_switch_ecc(bool, uin
The omap serial names have changed from ttySx to ttyOx,
so the console should be also changed to support this.
Signed-off-by: Thomas Weber
---
include/configs/devkit8000.h |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/configs/devkit8000.h b/include/configs
Signed-off-by: Thomas Weber
---
include/configs/cm_t35.h | 1 -
include/configs/dig297.h | 1 -
include/configs/igep00x0.h | 1 -
include/configs/mcx.h| 1 -
include/configs/omap3_mvblx.h| 1 -
include/configs/omap3_pandora.h | 1 -
include/configs
Remove the unused PHYS_SDRAM_1_SIZE from OMAP3 config files.
Signed-off-by: Thomas Weber
---
Changelog:
v2: - Correct name of define
- Add commit message
include/configs/cm_t35.h | 1 -
include/configs/dig297.h | 1 -
include/configs/igep00x0.h | 1
Hello Tom,
will you take this patch? Or should we add the CONFIG_MTD_ECC_SOFT to
the boards?
Regards,
Thomas
On 02/13/2012 10:55 PM, Scott Wood wrote:
This reverts commit 4fee6c2f295f932b8febdc7ce8731ba045695fa5.
It breaks boards that currently rely on soft-ecc, as pointed out here:
http://
subcommand support to bootm
> [PATCH V14 13/13] cam_enc_4xx: Rename 'images' to 'imgs'
> ___
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
It applies on TI-u-boot, but TI-u-boot is stil
adresses/addresses
alernate/alternate
asssuming/assuming
calcualted/calculated
enviroment/environment
evalutation/evaluation
falsh/flash
labled/labeled
paramaters/parameters
Signed-off-by: Thomas Weber
---
doc/README.AVR32-port-muxing |4 ++--
doc/README.SNTP |2 +-
doc
instead of printf.
Add "errno=%d" in output as suggested by Albert Aribaud.
Signed-off-by: Thomas Weber
---
fs/ubifs/super.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 26b48f0..30ccd98 100644
--- a/fs/ubifs/super.c
+++
From: Bernhard Walle
Signed-off-by: Bernhard Walle
---
include/configs/tricorder.h |9 +++--
1 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index d826e19..801a24f 100644
--- a/include/configs/tricorder.h
+++ b/inc
From: Bernhard Walle
Since kernel should be in a ubifs partition, we need UBIFS.
The greater malloc size is needed for UBIFS.
Signed-off-by: Bernhard Walle
Squashed two commits (UBIFS enabled and malloc size increased) into one.
Signed-off-by: Thomas Weber
---
include/configs/tricorder.h
Signed-off-by: Thomas Weber
---
drivers/net/dm9000x.c |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 73dd335..08bd794 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -74,8 +74,8 @@ TODO: external
Mike Frysinger schrieb:
> your subject line really needs a prefix to narrow down where exactly your fix
> is going. it also should not have a period.
>
> net: dm9000x: fix debug output
> -mike
>
Hello,
should i resend the patch with the corrected subject line?
Thomas
signature.asc
Descrip
Wolfgang Denk schrieb:
> Dear Thomas Weber,
>
> In message <1260177679-18337-1-git-send-email-we...@corscience.de> you wrote:
>
>> Signed-off-by: Thomas Weber
>> ---
>> drivers/net/dm9000x.c |4 ++--
>> 1 files changed, 2 insertions(+), 2 d
Wolfgang Denk schrieb:
> Dear Thomas Weber,
>
> In message <4b1cfef3.7080...@corscience.de> you wrote:
>
>>> Which problem is this supposed to fix?
>>>
> ...
>
>> In commit 60f61e6d7655400bb785a2ef637581679941f6d1 the following calls
&
commit 60f61e6d7655400bb785a2ef637581679941f6d1 breaks compile with gcc by
introducing __func__
instead of constant string "func" in the macro call but missed to change the
macro.
Signed-off-by: Thomas Weber
---
drivers/net/dm9000x.c |2 +-
1 files changed, 1 insertions(+), 1
I executed 'find . -name "*.[chS]" -perm 755 -exec chmod 644 {} \;'
Signed-off-by: Thomas Weber
---
0 files changed, 0 insertions(+), 0 deletions(-)
mode change 100755 => 100644 board/spear/common/spr_lowlevel_init.S
mode change 100755 => 100644 board/spear/comm
On 04/26/10 04:51, Ben Warren wrote:
> Mike,
>
> ApplOn 4/14/2010 1:29 PM, Mike Frysinger wrote:
>> The current dm9000x driver accesses its memory mapped registers directly
>> instead of using the standard I/O accessors. This can cause problems on
>> Blackfin systems as the accesses can get out o
On 07.05.2010 15:37, Thomas Weber wrote:
> On 04/26/10 04:51, Ben Warren wrote:
>
>> Mike,
>>
>> ApplOn 4/14/2010 1:29 PM, Mike Frysinger wrote:
>>
>>> The current dm9000x driver accesses its memory mapped registers directly
>>> instead of u
In commit a45dde2293c816138e53c26eca6fd0322583f9a6 the I/O accessor for
the DM9000 is changed.
The definition of __io is required to use the standard I/O accessors from
asm/io.h.
Signed-off-by: Thomas Weber
---
include/configs/devkit8000.h |2 ++
1 files changed, 2 insertions(+), 0
On 07.05.2010 17:15, Wolfgang Denk wrote:
Dear Thomas Weber,
In message <1273242366-6552-1-git-send-email-we...@corscience.de>
<1273242366-6552-1-git-send-email-we...@corscience.de> you wrote:
In commit a45dde2293c816138e53c26eca6fd0322583f9a6 the I/O accessor for
the DM9000 is c
Hello Marek,
On 05/11/10 04:25, Marek Vasut wrote:
> Dne Út 11. května 2010 05:47:40 Marek Vasut napsal(a):
>> Dne Út 11. května 2010 05:28:38 Marek Vasut napsal(a):
>>> Dne Pá 7. května 2010 18:58:34 Thomas Weber napsal(a):
>>>> On 07.05.2010 17:15, Wolfgang Denk
> +void __aeabi_unwind_cpp_pr0(void)
> +{
> +};
Thanks for the patch.
Compiled for and tested on Devkit8000
Tested-by: Thomas Weber
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
fine readw(c) ({ u16 __v = __arch_getw(c); __iormb(); __v; })
> +#define readl(c) ({ u32 __v = __arch_getl(c); __iormb(); __v; })
>
> /*
> * The compiler seems to be incapable of optimising constants
Tested-by: Thomas Weber
on Devkit8000 with codesourcery arm2010.09 (gcc4.5.1) and arm2010q1 (gcc
4.4.1)
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Am 07.11.2011 14:18, schrieb Mariya Abdul Ghafoor:
>
> I configured Angstrom on DevKit8000 (clone
> of Beagleboard) now the touch screen shows shell prompt i.e.
> root@DevKit8000~# but there is no uboot console output...I need to port
> Android on it and without the console output I have no id
SYS_NAND_PAGE_COUNT 64
> #define CONFIG_SYS_NAND_PAGE_SIZE2048
> #define CONFIG_SYS_NAND_OOBSIZE 64
Tested-by: Thomas Weber
on Devkit8000 with 256 MB NAND.
Tomorrow I will test it with a 128 MB NAND devkit8000.
Thomas
___
U-Boo
Hello Tom,
Am 08.11.2011 21:53, schrieb Thomas Weber:
> Am 26.10.2011 20:09, schrieb Tom Rini:
>> The devkit8000 ships with either a 128MB or 256MB NAND chip. In
>> order for SPL to work with 256MB NAND CONFIG_SYS_NAND_5_ADDR_CYCLE
>> needs to be set. After talking with S
When compiling with -DDEBUG enabled this caused a
warning about multiple definition of DEBUG.
Signed-off-by: Thomas Weber
---
common/env_nand.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/common/env_nand.c b/common/env_nand.c
index 14446a6..e71a229 100644
--- a
Hello,
I configured u-boot for devkit8000_config and enabled -DDEBUG in config.mk.
I get the following error:
lib/libgeneric.o: In function `panic':
u-boot/lib/vsprintf.c:730: undefined reference to `do_reset'
make[1]: *** [u-boot/spl/u-boot-spl] error 1
I think it is a problem with the CONFIG
This patch removes the unused definition of SDRC_R_C_B
from the config files.
Signed-off-by: Thomas Weber
---
include/configs/am3517_crane.h |1 -
include/configs/am3517_evm.h |1 -
include/configs/cm_t35.h |1 -
include/configs/devkit8000.h |1
This patch removes the CONFIG_OMAP3430, because it is unused.
Signed-off-by: Thomas Weber
---
include/configs/cm_t35.h |1 -
include/configs/devkit8000.h |1 -
include/configs/dig297.h |1 -
include/configs/igep0020.h |1 -
include/configs
This patchset removes some unused definitions from the config files.
It is mostly omap3 centred.
Thomas Weber (3):
ARM: OMAP3: Remove unused define CONFIG_OMAP3430
ARM: OMAP3: Remove unused define SDRC_R_C_B
ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused
include/configs
This patch removes the definition of stack sizes for
irq and fiq if the CONFIG_USE_IRQ is undefined before.
Signed-off-by: Thomas Weber
---
include/configs/am3517_crane.h |4
include/configs/am3517_evm.h |4
include/configs/apollon.h |4
include
Hello Alexander,
Am 02.03.2011 00:13, schrieb Jason Kridner:
> On Fri, Feb 18, 2011 at 3:37 AM, Alexander Holler
> wrote:
>> Linux kernels >= 2.6.36 are using ttyOn instead ttySn for the
>> serials on OMAPs.
>>
>> Signed-off-by: Alexander Holler
>
> Ack.
>
>> ---
>> include/configs/omap3_beag
Hello Stefano,
there are some inconsistency for the writing of the Falcon mode:
"Falcon" mode, Falcon mode, Falcon, falcon, "Falcon mode"
On 11/13/2012 12:11 PM, Stefano Babic wrote:
> Simple howto to add support to a board
> for booting the kernel from SPL ("Falcon" mode).
>
> Signed-off-by: Ste
On 11/13/2012 12:11 PM, Stefano Babic wrote:
> CONFIG_SPL_OS_BOOT_KEY is used only in board files. It is
> not required to have a general CONFIG_ option. Rename it and
> define it in board directory.
>
> Signed-off-by: Stefano Babic
>
Tested on Devkit8000.
Tested-by: Thom
Fix compilation of Devkit8000 after introduction of
ARM relocation support.
Signed-off-by: Thomas Weber
---
board/timll/devkit8000/config.mk |2 +-
include/configs/devkit8000.h |3 +++
2 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/board/timll/devkit8000/config.mk b
This patch fixes the issue by defining and using
CONFIG_SYS_INIT_RAM_SIZE and CONFIG_SYS_INIT_RAM_ADDR.
This patch adopts the
commit 31bfcf1c5776df3d90286aa15104c45096d53dc6
from Steve Sakoman and Sandeep Paulraj on Devkit8000.
Signed-off-by: Thomas Weber
---
include/configs/devkit8000.h
without checking if there are still arguments available.
caller:
static int do_env (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
...
/* drop initial "env" arg */
argc--;
argv++;
cp = find_cmd_tbl(argv[0], cmd_env_sub, ARRAY_SIZE(cmd_env_sub));
The env command needs one subcommand. If this is not available
print the usage help.
Signed-off-by: Thomas Weber
---
common/cmd_nvedit.c |3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index 3fd8abc..52c5e7c 100644
--- a
Guard strchr/strlen from being called with NULL pointer.
This line is crashing when command "env" is called without subcommand.
The cmd is NULL in this case because the calling function "do_env"
decremented the argc without checking if there are still arguments available.
S
cmd_usage returns 1, so its return value can be used as return value.
Some functions ignore the return value of cmd_usage and return a "1" in
the next line. This patch changes these calls so that the return value of
cmd_usage is used as return value.
Signed-off-by: Thomas Weber
cmd_usage returns 1, so its return value can be used as return value.
Some functions ignore the return value of cmd_usage and return a "1" in
the next line. These patches change these calls so that the return value of
cmd_usage is used as return value.
*** BLURB HERE ***
Thoma
Use the return value of cmd_usage instead of ignoring this
and returning a 1.
Signed-off-by: Thomas Weber
---
common/cmd_nvedit.c | 18 ++
1 files changed, 6 insertions(+), 12 deletions(-)
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index 3fd8abc..cd19cc6 100644
Use the return value of cmd_usage instead of ignoring this
and returning a 1.
Signed-off-by: Thomas Weber
---
arch/powerpc/cpu/ppc4xx/cmd_ecctest.c |6 ++
1 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c
b/arch/powerpc/cpu/ppc4xx
Use the return value of cmd_usage instead of ignoring this
and returning a 1.
Signed-off-by: Thomas Weber
---
board/gdsys/common/osd.c |6 ++
1 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/board/gdsys/common/osd.c b/board/gdsys/common/osd.c
index 05800ff..239c870 100644
On Sat, Nov 27, 2010 at 7:50 PM, Wolfgang Denk wrote:
> Dear Albert ARIBAUD,
>
> In message <4cf0ca18.1000...@free.fr> you wrote:
>>
>> Globally, this is expected and does not hit only ARMV7 but any ARM board
>> -- I think on the whole MAKEALL arm, only 35 out of 168 boards build
>> without errors
This patch fixes the bss usage in ARMv7/omap-common/timer.c
The .bss section cannot be used before the relocation, because this
section is overlayed with .rel.dyn section.
Suggested-by: Andreas Biessmann
Signed-off-by: Thomas Weber
---
arch/arm/cpu/armv7/omap-common/timer.c |6 ++
1
Hello Heiko,
On Mon, Nov 29, 2010 at 6:25 PM, Heiko Schocher wrote:
> Hello Thomas,
>
> Thomas Weber wrote:
>> This patch fixes the bss usage in ARMv7/omap-common/timer.c
>>
>> The .bss section cannot be used before the relocation, because this
>> section i
gd->timestamp += gd->lastdec - now;
> else
> - timestamp += lastdec + count_value - now;
> + gd->timestamp += gd->lastdec + gd->count_value - now;
>
> - lastdec = now;
> + gd->lastdec = now;
>
> - return t
_io(p) for {in,out}[bwl] macros. This macro may be
> + * defined in a machine specific io definition earlier.
> + */
> +#ifndef __io
> +#define __io(p) (p)
> +#endif
>
> /*
> * IO port access primitives
I tested it on Devkit8000.
Tested-by: Thomas Weber
Hello,
the u-boot and the linux-kernel from the TimLL cd are patched with an
unofficial machine identifier. They are not working with any other of
your sources. You need to update both, u-boot and linux-kernel. Can
you write me, which u-boot and linux-kernel version you are using?
Thomas
On Sat
_inl(r) readl((volatile u32 *)(r))
>
> #ifdef CONFIG_DM9000_DEBUG
> static void
Hello,
tested on Devkit8000.
Thomas
Tested-by: Thomas Weber
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
96 matches
Mail list logo
