Hello Rachna, I get multiple timeouts from wait_for_status_mask() during i2c_write(), line 481.
The Result is 1410h und status_mask is 7h. I use a devkit8000, booting from sd-card. Regards, Thomas U-Boot SPL 2011.12-00323-g9a3aae2-dirty (Feb 17 2012 - 09:30:36) Texas Instruments Revision detection unimplemented OMAP SD/MMC: 0 timed out in wait_for_status_mask: I2C_STAT=1410 timed out in wait_for_status_mask: I2C_STAT=1410 reading u-boot.img reading u-boot.img U-Boot 2011.12-00323-g9a3aae2-dirty (Feb 17 2012 - 09:30:36) OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz OMAP3 DevKit8000 + LPDDR/NAND I2C: ready DRAM: 128 MiB NAND: 128 MiB MMC: OMAP SD/MMC: 0 NAND read from offset 260000 failed -74 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial timed out in wait_for_status_mask: I2C_STAT=1410 timed out in wait_for_status_mask: I2C_STAT=1410 timed out in wait_for_status_mask: I2C_STAT=1410 timed out in wait_for_status_mask: I2C_STAT=1410 timed out in wait_for_status_mask: I2C_STAT=1410 timed out in wait_for_status_mask: I2C_STAT=1410 timed out in wait_for_status_mask: I2C_STAT=1410 ethaddr not set, using Die ID Die ID #1d82000400000000040365f90100b017 Net: dm9000 Hit any key to stop autoboot: 0 OMAP3 DevKit8000 # _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
