would
appear on the PCIe bus.
Signed-off-by: Tanmay Upadhyay
Signed-off-by: Dhaval Vasa
---
board/Marvell/openrd_base/openrd_base.h |8
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/board/Marvell/openrd_base/openrd_base.h
b/board/Marvell/openrd_base/openrd_base.
would
appear on the PCIe bus.
Signed-off-by: Tanmay Upadhyay
Signed-off-by: Dhaval Vasa
---
board/Marvell/openrd_base/openrd_base.h |8
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/board/Marvell/openrd_base/openrd_base.h
b/board/Marvell/openrd_base/openrd_base.
low for 100 us and then sets high while booting.
XGI Vollari Z11 GPU and Intel WiFi 4965 works fine without this fix.
Where as Broadcom's BCM970012 doesn't appear on the PCIe bus without
the fix. There might be few other devices as well which require this.
Signed-off-by: Tanmay Upadhy
On Wednesday 09 February 2011 03:47 PM, Wolfgang Denk wrote:
> Dear Tanmay Upadhyay - Embedded,
>
> In message<726556893.71716.1297242968960.javamail.r...@ahm.einfochips.com>
> you wrote:
>> --===1012086174==
>> Content-Type: multipart
If start of any DRAM bank is greater than total DDR size, remaining
DDR bank sizes were left un-initialized in dram_init function. This
could break other functions who uses array 'gd->bd->bi_dram'.Kirkwood
network driver is one example.
Signed-off-by: Tanmay Upadhyay
---
arch/a
/14/2010 06:17 PM, Tanmay Upadhyay wrote:
If start of any DRAM bank is greater than total DDR size, remaining
DDR bank sizes were left un-initialized in dram_init function. This
could break other functions who uses array 'gd->bd->bi_dram'.Kirkwood
network driver is one example.
Signe
Linux kernel from booting.
v2 - Set start address also to 0. Without this Linux kernel couldn't
boot up
Signed-off-by: Tanmay Upadhyay
---
arch/arm/cpu/arm926ejs/kirkwood/dram.c | 10 ++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/k
This patch modifies existing OpenRD-Base support to deal with all
the three OpenRD boards (OpenRD-Base, OpenRD-Client & OpenRD-Ultimate).
Signed-off-by: Tanmay Upadhyay
---
MAKEALL |2 +
board/Marvell/openrd/Makefile | 56 ++
board/Mar
This patch adds board_early_init_f function for OpenRD boards. The
function initializes MPPs so that peripherals can work at early
stage.
Signed-off-by: Tanmay Upadhyay
---
board/Marvell/openrd/openrd.c |6 +-
include/configs/openrd.h |2 ++
2 files changed, 7 insertions(+), 1
This patch modifies existing OpenRD-Base support to deal with all
the three OpenRD boards (OpenRD-Base, OpenRD-Client & OpenRD-Ultimate).
Signed-off-by: Tanmay Upadhyay
---
Makefile|9 +-
arch/arm/include/asm/mach-types.h | 13 ++
board/Marvell/op
On 06/10/2010 02:46 PM, Simon Kagstrom wrote:
On Thu, 10 Jun 2010 14:42:24 +0530
Tanmay Upadhyay wrote:
This patch modifies existing OpenRD-Base support to deal with all
the three OpenRD boards (OpenRD-Base, OpenRD-Client& OpenRD-Ultimate).
Yes, that's a good change!
On 06/11/2010 12:33 AM, Prafulla Wadaskar wrote:
-Original Message-
From: Simon Kagstrom [mailto:simon.kagst...@netinsight.net]
Sent: Thursday, June 10, 2010 3:56 PM
To: Tanmay Upadhyay
Cc: Prafulla Wadaskar; u-boot@lists.denx.de
Subject: Re: [PATCH] ARM: Kirkwood: Add support
- Original Message -
From: "Prafulla Wadaskar"
To: "Julian Pidancet" , u-boot@lists.denx.de
Cc: "tanmay upadhyay" , "Prabhanjan Sarnaik"
, "Ashish Karkare"
Sent: Wednesday, February 9, 2011 12:16:40 PM
Subject: RE: [PATCH] Kirkwoo
- Original Message -
From: "Julian Pidancet"
To: u-boot@lists.denx.de
Cc: "tanmay upadhyay" , prafu...@marvell.com
Sent: Tuesday, February 8, 2011 11:50:54 PM
Subject: [PATCH] Kirkwood: Add support for OpenRD-Client & OpenRD-Ultimate
This patch modif
- Original Message -
From: Prafulla Wadaskar <prafu...@marvell.com>
To: Tanmay Upadhyay <tanmay.upadh...@einfochips.com>
Cc: u-boot@lists.denx.de, g remlin <g_rem...@rocketmail.com>, Ashish
Karkare <akark...@marvell.com>, Prabhanjan Sarnaik
<sarn...@marvell.com
15 matches
Mail list logo
