Move udoo configuration files to board/udoo/ folder.
Align clock configuration and DDR3 calibration to Seco suggested value
to increase system stability.
Signed-off-by: Giuseppe Pagano
Cc: sba...@denx.de
...
diff -uNr a/board/udoo/1066mhz_4x256mx16.cfg
b/board/udoo/1066mhz_4x256mx16.cfg
--- a
Add Ethernet and networking support on uDoo board (FEC + phy Micrel)
Signed-off-by: Giuseppe Pagano
Cc: sba...@denx.de
---
diff -uNr a/board/udoo/udoo.c b/board/udoo/udoo.c
--- a/board/udoo/udoo.c
+++ b/board/udoo/udoo.c
@@ -9,6 +9,7 @@
#include
#include
#include
+#include
#include
To have watchdog quiet during kernel boot it is necessary to
change gpio wdt trigger direction.
Signed-off-by: Giuseppe Pagano
Cc: sba...@denx.de
---
diff -uNr a/board/udoo/udoo.c b/board/udoo/udoo.c
--- a/board/udoo/udoo.c 2013-11-06 18:47:26.0 +0100
+++ b/board/udoo/udoo.c 2013-11
Add Sata support on uDoo Board.
Signed-off-by: Giuseppe Pagano
Cc: sba...@denx.de
---
diff -uNr a/board/udoo/udoo.c b/board/udoo/udoo.c
--- a/board/udoo/udoo.c 2013-11-06 18:45:22.0 +0100
+++ b/board/udoo/udoo.c 2013-11-06 18:46:00.0 +0100
@@ -208,6 +208,32 @@
return 0
Change u-boot default environment for uDoo board to:
- mount /dev/mmcblk0p1 partition
- activate hdmi monitor by default (instead of nothing)
Signed-off-by: Giuseppe Pagano
Cc: sba...@denx.de
---
diff -uNr a/include/configs/udoo.h b/include/configs/udoo.h
--- a/include/configs/udoo.h
Hi Stefano,
On Thu, 2013-11-07 at 09:12 +0100, Stefano Babic wrote:
> Hi Giuseppe,
>
> On 06/11/2013 21:30, Giuseppe Pagano wrote:
> > Move udoo configuration files to board/udoo/ folder.
> > Align clock configuration and DDR3 calibration to Seco suggested value
> > t
Hi Stefano,
On Thu, 2013-11-07 at 09:19 +0100, Stefano Babic wrote:
> Hi Giuseppe,
>
> On 06/11/2013 21:44, Giuseppe Pagano wrote:
> > To have watchdog quiet during kernel boot it is necessary to
> > change gpio wdt trigger direction.
> >
>
> Sorry, this is no
Hi Stefano,
On Thu, 2013-11-07 at 09:33 +0100, Stefano Babic wrote:
> Hi Giuseppe,
>
> On 06/11/2013 21:44, Giuseppe Pagano wrote:
> > Change u-boot default environment for uDoo board to:
> > - mount /dev/mmcblk0p1 partition
> > - activate hdmi monitor by
Hi Stefano,
On Thu, 2013-11-07 at 09:38 +0100, Stefano Babic wrote:
> Hi Giuseppe,
>
> On 06/11/2013 21:33, Giuseppe Pagano wrote:
> > Add Ethernet and networking support on uDoo board (FEC + phy Micrel)
> >
> >
> > Signed-off-by: Giuseppe Pagano
>
On Thu, 2013-11-07 at 09:40 +0100, Stefano Babic wrote:
> Hi Giuseppe,
>
> On 06/11/2013 21:37, Giuseppe Pagano wrote:
> > Add Sata support on uDoo Board.
> >
> > Signed-off-by: Giuseppe Pagano
> > Cc: sba...@denx.de
> >
> > ---
> &g
support
of the board.
Patch changes uDoo configuration files path to a specific one, and adopt
optimized value for every configured register.
Signed-off-by: Giuseppe Pagano
CC: Stefano Babic
CC: Fabio Estevam
---
board/udoo/1066mhz_4x256mx16.cfg | 56
board/udoo
Add Ethernet and networking support on uDoo board (FEC + phy Micrel KSZ9031).
Signed-off-by: Giuseppe Pagano
CC: Stefano Babic
CC: Fabio Estevam
---
board/udoo/udoo.c | 140
include/configs/udoo.h | 16 ++
include/micrel.h
uDoo uses APX823-31W5 watchdog chip. Timeout is about 1.2 seconds.
To disabled watchdog during kernel boot, WDI pin of that chip needs to be in
"high impedance" state.
I.mx6 gpio configuration does not contemplate tristate, so pin is set as input
in high impedance.
Signed-off-by
Adds SATA support on uDoo Board.
Moves sata_setup function definition from nitrogen6x.c and udoo.c to
arch/arm/imx-common/sata.c to avoid code duplication.
Signed-off-by: Giuseppe Pagano
CC: Stefano Babic
CC: Fabio Estevam
CC: Eric Nelson
---
arch/arm/imx-common/Makefile |1
Hi Ottavio,
On Mon, 2013-11-11 at 16:00 -0200, Otavio Salvador wrote:
> Hello Giuseppe,
>
> On Mon, Nov 11, 2013 at 3:11 PM, Giuseppe Pagano
> wrote:
> > Adds SATA support on uDoo Board.
> > Moves sata_setup function definition from nitrogen6x.c and udoo.c to
>>
Hi Fabio,
On Tue, 2013-11-12 at 13:00 -0200, Fabio Estevam wrote:
> >> + /* alimentazione ethernet*/
> >
> > Actually this is pin is Ethernet PHY reset, so the comment in Italian
> > is not correct :-)
>
> Sorry, I looked at the wrong line. Anyway, please change the comment
> to "Ethernet
Hi Stefano,
On Wed, 2013-11-13 at 10:04 +0100, Stefano Babic wrote:
> Hi Giuseppe,
>
> On 11/11/2013 18:11, Giuseppe Pagano wrote:
> > Add Ethernet and networking support on uDoo board (FEC + phy Micrel
> > KSZ9031).
> >
> > Signed-off-by: Giuseppe Pagano
>
of the board.
Patch changes uDoo configuration files path to a specific one, and adopt
optimized value for every configured register.
Signed-off-by: Giuseppe Pagano
Tested-by: Fabio Estevam
CC: Stefano Babic
CC: Fabio Estevam
---
Changes in v2:
- Cosmetic changes.
board/udoo
Move setup_sata function definition from platform file nitrogen6x.c
to arch/arm/imx-common/sata.c to avoid code duplication.
Signed-off-by: Giuseppe Pagano
CC: Stefano Babic
CC: Fabio Estevam
CC: Eric Nelson
---
Changes in v2:
- Split previous patch between nitrogen6x udoo code changes
Add Ethernet and networking support on uDoo board (FEC +phy Micrel KSZ9031).
Ethernet speed is currently limited to 10/100Mbps.
Signed-off-by: Giuseppe Pagano
Tested-by: Fabio Estevam
CC: Stefano Babic
CC: Fabio Estevam
---
Changes in v2:
- Improve description and comment.
- uDoo does
Add SATA support on uDoo Board.
Signed-off-by: Giuseppe Pagano
CC: Stefano Babic
CC: Fabio Estevam
---
Changes in v2:
- Split previous patch between nitrogen6x udoo code changes.
board/udoo/udoo.c |4
include/configs/udoo.h | 12
2 files changed, 16 insertions
uDoo uses APX823-31W5 watchdog chip. Timeout is about 1.2 seconds.
To disabled watchdog during kernel boot, WDI pin of that chip needs to be
in "high impedance" state. I.mx6 gpio configuration does not contemplate
tristate, so pin is set as input in high impedance.
Signed-off-by: Giuse
Hi Stefano,
On Mon, 2013-11-18 at 16:51 +0100, Stefano Babic wrote:
> Hi Giuseppe,
>
> On 15/11/2013 17:42, Giuseppe Pagano wrote:
> > Add Ethernet and networking support on uDoo board (FEC +phy Micrel KSZ9031).
> > Ethernet speed is currently limited to 10/100Mbps.
&
On Mon, 2013-11-18 at 18:05 +0100, Giuseppe Pagano wrote:
>
> >
> > > + ksz9031_phy_extended_write(phydev, 0x02,
> > > +MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
> > > +MII_KSZ9031_MOD_DATA_NO_POST_INC, 0
Add SATA support on uDoo Board.
Signed-off-by: Giuseppe Pagano
CC: Stefano Babic
CC: Fabio Estevam
---
Changes in v3:
- No changes.
Changes in v2:
- Split previous patch between nitrogen6x udoo code changes.
---
board/udoo/udoo.c |4
include/configs/udoo.h | 12
Move setup_sata function definition from platform file nitrogen6x.c
to arch/arm/imx-common/sata.c to avoid code duplication.
Signed-off-by: Giuseppe Pagano
CC: Stefano Babic
CC: Fabio Estevam
CC: Eric Nelson
---
Changes in v3:
- Correct Makefile for filter sata.c to be compiled only for
Hi Stefano,
On Thu, 2013-11-28 at 09:26 +0100, Stefano Babic wrote:
> Hi Giuseppe,
>
> On 15/11/2013 17:42, Giuseppe Pagano wrote:
> > Add Ethernet and networking support on uDoo board (FEC +phy Micrel KSZ9031).
> > Ethernet speed is currently limited to 10/100Mbps.
&g
nch.
Do you want me to send v4 patch with changes ?
> Best regards,
> Stefano
Best regards
Giuseppe Pagano
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Move setup_sata function definition from platform file nitrogen6x.c
to arch/arm/imx-common/sata.c to avoid code duplication.
Signed-off-by: Giuseppe Pagano
CC: Stefano Babic
CC: Fabio Estevam
CC: Eric Nelson
---
Changes in v4:
- Correct Makefile patch to use: obj- instead of COBJS
Add SATA support on uDoo Board.
Signed-off-by: Giuseppe Pagano
CC: Stefano Babic
CC: Fabio Estevam
---
Changes in v4:
- No changes.
Changes in v3:
- No changes.
Changes in v2:
- Split previous patch between nitrogen6x udoo code changes.
---
board/udoo/udoo.c |4
include
30 matches
Mail list logo
