Move setup_sata function definition from platform file nitrogen6x.c
to arch/arm/imx-common/sata.c to avoid code duplication.
Signed-off-by: Giuseppe Pagano <giuseppe.pag...@seco.com>
CC: Stefano Babic <sba...@denx.de>
CC: Fabio Estevam <fabio.este...@freescale.com>
CC: Eric Nelson <eric.nel...@boundarydevices.com>
---
Changes in v4:
- Correct Makefile patch to use: obj- instead of COBJS-.
Changes in v3:
- Correct Makefile for filter sata.c to be compiled only for mx6
soc because in function setup_sata there are i.MX6 specific
registers definition and this breaks mx5 boards. mx5 boards
does not need setup_sata initialization.
Changes in v2:
- Split previous patch between nitrogen6x udoo code changes.
---
arch/arm/imx-common/Makefile | 3 +++
arch/arm/imx-common/sata.c | 33 ++++++++++++++++++++++++++++++++
arch/arm/include/asm/imx-common/sata.h | 17 ++++++++++++++++
board/boundary/nitrogen6x/nitrogen6x.c | 27 +-------------------------
4 files changed, 54 insertions(+), 26 deletions(-)
create mode 100644 arch/arm/imx-common/sata.c
create mode 100644 arch/arm/include/asm/imx-common/sata.h
diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index 2c80441..68f0f52 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -17,6 +17,9 @@ endif
ifeq ($(SOC),$(filter $(SOC),mx6 mxs))
obj-y += misc.o
endif
+ifeq ($(SOC),$(filter $(SOC),mx6))
+objs-$(CONFIG_CMD_SATA) += sata.o
+endif
obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o
obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
diff --git a/arch/arm/imx-common/sata.c b/arch/arm/imx-common/sata.c
new file mode 100644
index 0000000..1b4c502
--- /dev/null
+++ b/arch/arm/imx-common/sata.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/arch/iomux.h>
+#include <asm/io.h>
+
+int setup_sata(void)
+{
+ struct iomuxc_base_regs *const iomuxc_regs
+ = (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR;
+
+ int ret = enable_sata_clock();
+ if (ret)
+ return ret;
+
+ clrsetbits_le32(&iomuxc_regs->gpr[13],
+ IOMUXC_GPR13_SATA_MASK,
+ IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB
+ |IOMUXC_GPR13_SATA_PHY_7_SATA2M
+ |IOMUXC_GPR13_SATA_SPEED_3G
+ |(3<<IOMUXC_GPR13_SATA_PHY_6_SHIFT)
+ |IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED
+ |IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16
+ |IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB
+ |IOMUXC_GPR13_SATA_PHY_2_TX_1P104V
+ |IOMUXC_GPR13_SATA_PHY_1_SLOW);
+
+ return 0;
+}
diff --git a/arch/arm/include/asm/imx-common/sata.h
b/arch/arm/include/asm/imx-common/sata.h
new file mode 100644
index 0000000..8bb4493
--- /dev/null
+++ b/arch/arm/include/asm/imx-common/sata.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __IMX_SATA_H_
+#define __IMX_SATA_H_
+
+/*
+ * SATA setup for i.mx6 quad based platform
+ */
+
+int setup_sata(void);
+
+#endif
+
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c
b/board/boundary/nitrogen6x/nitrogen6x.c
index 616ad55..3f4cfa1 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -17,6 +17,7 @@
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
#include <asm/imx-common/mxc_i2c.h>
+#include <asm/imx-common/sata.h>
#include <asm/imx-common/boot_mode.h>
#include <mmc.h>
#include <fsl_esdhc.h>
@@ -401,32 +402,6 @@ static void setup_buttons(void)
ARRAY_SIZE(button_pads));
}
-#ifdef CONFIG_CMD_SATA
-
-int setup_sata(void)
-{
- struct iomuxc_base_regs *const iomuxc_regs
- = (struct iomuxc_base_regs *) IOMUXC_BASE_ADDR;
- int ret = enable_sata_clock();
- if (ret)
- return ret;
-
- clrsetbits_le32(&iomuxc_regs->gpr[13],
- IOMUXC_GPR13_SATA_MASK,
- IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB
- |IOMUXC_GPR13_SATA_PHY_7_SATA2M
- |IOMUXC_GPR13_SATA_SPEED_3G
- |(3<<IOMUXC_GPR13_SATA_PHY_6_SHIFT)
- |IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED
- |IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16
- |IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB
- |IOMUXC_GPR13_SATA_PHY_2_TX_1P104V
- |IOMUXC_GPR13_SATA_PHY_1_SLOW);
-
- return 0;
-}
-#endif
-
#if defined(CONFIG_VIDEO_IPUV3)
static iomux_v3_cfg_t const backlight_pads[] = {
--
1.7.10.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
