Hi All,
I am very new to u-boot.
I have kernel image, which I loaded to NOR of my board and with bootm,
control passes to kernel and it starts booting.
There is panic in kernel: since it can not find the file-system. I am
afraid, I did make trivial mistake.
I have flashed squashfs filesystem ima
Hi Detlev,
On Tue, May 12, 2009 at 9:10 PM, Detlev Zundel wrote:
> Hi Bharat,
>
> [re-adding the mailing list as others may also profit from the
> discussion]
>
> > Thank you for the prompt reply.
> >
> > Unfortunately in linux tree, my board specific MTD partition info is not
> > preset.
> >
>
Hi Detlev,
I have gone thru the kernel code. I could only figure out that m25p80
is spi driver which is register as spi-driver. Registration is done,
which I could see from early printk's. But this module is never
probed. Next, kernel iterates through the list of devices and tries to
find out mtdp
Hi Detlev,
Seems there was an issue with my kernel code that you correctly
pointed out in previous mail.
Now I could pass bootarg board='myboard'. For myboard, I have done
relevent changes in kernel code, so kernel does init for my hardware.
Earlier while choosing mips machine, it was choosing g
> -Original Message-
> From: upstream-release-boun...@linux.freescale.net [mailto:upstream-
> release-boun...@linux.freescale.net] On Behalf Of Laurentiu Tudor
> Sent: Tuesday, July 3, 2018 5:42 PM
> To: York Sun ; Prabhakar Kushwaha
> ; u-boot@lists.denx.de
> Cc: Laurentiu Tudor
> Subje
> -Original Message-
> From: upstream-release-boun...@linux.freescale.net [mailto:upstream-
> release-boun...@linux.freescale.net] On Behalf Of Laurentiu Tudor
> Sent: Tuesday, July 3, 2018 5:42 PM
> To: York Sun ; Prabhakar Kushwaha
> ; u-boot@lists.denx.de
> Cc: Laurentiu Tudor
> Subje
> -Original Message-
> From: Laurentiu Tudor [mailto:laurentiu.tu...@nxp.com]
> Sent: Wednesday, July 4, 2018 7:44 PM
> To: York Sun ; Prabhakar Kushwaha
> ; u-boot@lists.denx.de
> Cc: Bharat Bhushan ; Laurentiu Tudor
>
> Subject: [PATCH v3 3/7] misc: fsl_portals
> -Original Message-
> From: Laurentiu Tudor [mailto:laurentiu.tu...@nxp.com]
> Sent: Wednesday, July 4, 2018 7:44 PM
> To: York Sun ; Prabhakar Kushwaha
> ; u-boot@lists.denx.de
> Cc: Bharat Bhushan ; Laurentiu Tudor
>
> Subject: [PATCH v3 5/7] armv8: ls1
> -Original Message-
> From: Laurentiu Tudor [mailto:laurentiu.tu...@nxp.com]
> Sent: Wednesday, July 4, 2018 7:44 PM
> To: York Sun ; Prabhakar Kushwaha
> ; u-boot@lists.denx.de
> Cc: Bharat Bhushan ; Laurentiu Tudor
>
> Subject: [PATCH v3 6/7] armv8: ls1046a:
> -Original Message-
> From: Laurentiu Tudor [mailto:laurentiu.tu...@nxp.com]
> Sent: Wednesday, July 4, 2018 7:44 PM
> To: York Sun ; Prabhakar Kushwaha
> ; u-boot@lists.denx.de
> Cc: Bharat Bhushan ; Laurentiu Tudor
>
> Subject: [PATCH v3 7/7] armv8: ls1046a
> -Original Message-
> From: Laurentiu Tudor
> Sent: Monday, July 9, 2018 6:10 PM
> To: Bharat Bhushan ; York Sun
> ; Prabhakar Kushwaha
> ; u-boot@lists.denx.de
> Subject: Re: [PATCH v3 3/7] misc: fsl_portals: setup QMAN_BAR{E} also on
> ARM platforms
>
>
> -Original Message-
> From: Laurentiu Tudor
> Sent: Monday, July 9, 2018 6:42 PM
> To: Bharat Bhushan ; York Sun
> ; Prabhakar Kushwaha
> ; u-boot@lists.denx.de
> Subject: Re: [PATCH v3 5/7] armv8: ls1046a: initial icid setup support
>
> Hi Bharat,
>
> -Original Message-
> From: Laurentiu Tudor
> Sent: Monday, July 9, 2018 7:23 PM
> To: Bharat Bhushan ; York Sun
> ; Prabhakar Kushwaha
> ; u-boot@lists.denx.de
> Subject: Re: [PATCH v3 6/7] armv8: ls1046a: add icid setup for qman portals
>
> Hi Bharat,
>
> -Original Message-
> From: Horia Geanta
> Sent: Wednesday, July 25, 2018 11:25 PM
> To: Laurentiu Tudor ; York Sun
> ; Prabhakar Kushwaha
> ; u-boot@lists.denx.de
> Cc: Bharat Bhushan
> Subject: Re: [PATCH v4 8/8] armv8: ls1046a: setup SEC ICIDs and fix up de
> -Original Message-
> From: laurentiu.tu...@nxp.com [mailto:laurentiu.tu...@nxp.com]
> Sent: Friday, July 27, 2018 3:28 PM
> To: u-boot@lists.denx.de; Prabhakar Kushwaha
> ; York Sun
> Cc: Bharat Bhushan ; Horia Geanta
> ; Laurentiu Tudor
> Subject: [PATC
> -Original Message-
> From: Horia Geanta
> Sent: Monday, July 30, 2018 8:03 PM
> To: Laurentiu Tudor ; Bharat Bhushan
> ; u-boot@lists.denx.de; Prabhakar Kushwaha
> ; York Sun
> Cc: Alison Wang ; Ruchika Gupta
>
> Subject: Re: [PATCH v5 8/8] armv8: ls1046a:
> -Original Message-
> From: laurentiu.tu...@nxp.com [mailto:laurentiu.tu...@nxp.com]
> Sent: Tuesday, July 31, 2018 8:22 PM
> To: u-boot@lists.denx.de; Prabhakar Kushwaha
> ; York Sun
> Cc: Bharat Bhushan ; Horia Geanta
> ; Laurentiu Tudor
> Subject: [
> -Original Message-
> From: laurentiu.tu...@nxp.com [mailto:laurentiu.tu...@nxp.com]
> Sent: Tuesday, July 31, 2018 8:22 PM
> To: u-boot@lists.denx.de; Prabhakar Kushwaha
> ; York Sun
> Cc: Bharat Bhushan ; Horia Geanta
> ; Laurentiu Tudor
> Subject: [PATC
> -Original Message-
> From: laurentiu.tu...@nxp.com [mailto:laurentiu.tu...@nxp.com]
> Sent: Tuesday, July 31, 2018 8:22 PM
> To: u-boot@lists.denx.de; Prabhakar Kushwaha
> ; York Sun
> Cc: Bharat Bhushan ; Horia Geanta
> ; Laurentiu Tudor
> Subject: [PATCH v
> -Original Message-
> From: laurentiu.tu...@nxp.com [mailto:laurentiu.tu...@nxp.com]
> Sent: Tuesday, July 31, 2018 8:22 PM
> To: u-boot@lists.denx.de; Prabhakar Kushwaha
> ; York Sun
> Cc: Bharat Bhushan ; Horia Geanta
> ; Laurentiu Tudor
> Subject: [
> -Original Message-
> From: laurentiu.tu...@nxp.com [mailto:laurentiu.tu...@nxp.com]
> Sent: Tuesday, July 31, 2018 8:22 PM
> To: u-boot@lists.denx.de; Prabhakar Kushwaha
> ; York Sun
> Cc: Bharat Bhushan ; Horia Geanta
> ; Laurentiu Tudor
> Subject: [PATC
> -Original Message-
> From: laurentiu.tu...@nxp.com [mailto:laurentiu.tu...@nxp.com]
> Sent: Tuesday, July 31, 2018 8:22 PM
> To: u-boot@lists.denx.de; Prabhakar Kushwaha
> ; York Sun
> Cc: Bharat Bhushan ; Horia Geanta
> ; Laurentiu Tudor
> Subject: [PATCH v6
> -Original Message-
> From: laurentiu.tu...@nxp.com [mailto:laurentiu.tu...@nxp.com]
> Sent: Tuesday, July 31, 2018 8:22 PM
> To: u-boot@lists.denx.de; Prabhakar Kushwaha
> ; York Sun
> Cc: Bharat Bhushan ; Horia Geanta
> ; Laurentiu Tudor
> Subject: [PATC
> -Original Message-
> From: Horia Geanta
> Sent: Tuesday, July 31, 2018 9:49 PM
> To: Laurentiu Tudor ; u-boot@lists.denx.de;
> Prabhakar Kushwaha ; York Sun
>
> Cc: Bharat Bhushan
> Subject: Re: [PATCH v6 8/8] armv8: ls1046a: setup SEC ICIDs and fix up device
> -Original Message-
> From: upstream-release-boun...@linux.nxdi.nxp.com boun...@linux.nxdi.nxp.com> On Behalf Of laurentiu.tu...@nxp.com
> Sent: Wednesday, January 30, 2019 5:31 PM
> To: u-boot@lists.denx.de; Prabhakar Kushwaha
> ; York Sun
> Cc: Laurentiu Tudor
> Subject: [upstream-r
ure
> currently assumes. Fix the layout of the structure for these architectures.
>
> Signed-off-by: Laurentiu Tudor
Reviewed-by: Bharat Bhushan
> ---
> include/fsl_sec.h | 8
> 1 file changed, 8 insertions(+)
>
> diff --git a/include/fsl_sec.h b/inclu
> -Original Message-
> From: upstream-release-boun...@linux.nxdi.nxp.com boun...@linux.nxdi.nxp.com> On Behalf Of laurentiu.tu...@nxp.com
> Sent: Wednesday, January 30, 2019 5:31 PM
> To: u-boot@lists.denx.de; Prabhakar Kushwaha
> ; York Sun
> Cc: Laurentiu Tudor
> Subject: [upstream-r
> -Original Message-
> From: Diana Madalina Craciun
> Sent: Friday, March 10, 2017 8:54 PM
> To: Bharat Bhushan ; york sun
> ; u-boot@lists.denx.de
> Cc: Z.Q. Hou
> Subject: Re: [U-Boot] [PATCH] pcie-layerscape: Fixup iommu-map property
> of pci node
>
>
The stream ID allocation for Chasis3.0 devices,
LS1088, LS2088 and LS2080, can be shared.
This patch renames this accordingly.
Signed-off-by: Bharat Bhushan
---
.../asm/arch-fsl-layerscape/{ls2080a_stream_id.h => stream_id_lsch3.h} | 0
include/configs/ls2080a_commo
LS2080a, LS1088a and LS2088a SOCs are based on Chassis-3
and shared same stream-id partitioning. This patch
rewords the definition to support all these SOCs.
Also have changes in description about iommu-map property
updates in PCI node.
Signed-off-by: Bharat Bhushan
---
.../arm/include/asm
From: Bharat Bhushan
Layerscape Chasis-2 also uses same PCIe controller
as used in Chasis-3 and have similar PCI-Lut.
We need to initialize the pcie-lut for Chasis-2 also
as in Chasis-3.
Signed-off-by: Bharat Bhushan
---
drivers/pci/pcie_layerscape_fixup.c | 4 ++--
1 file changed, 2
As ls1012a is Chassis-2 type SOC and shares same streamid
definition, this patch adds using streamids for ls1012a
Signed-off-by: Bharat Bhushan
---
include/configs/ls1012a_common.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/ls1012a_common.h b/include/configs
As ls1046a is Chassis-2 type SOC and shares same streamid
definition, this patch adds using streamids for ls1046
Signed-off-by: Bharat Bhushan
---
include/configs/ls1046a_common.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/ls1046a_common.h b/include/configs
Layerscape Chassis-2 have PCIe device, some platform devices and
DPAA1 devices which will use stream-ids for iommu level isolation as
they lies behind SMMU.
This patch defines the stream-ids for Chassis-2 devices.
stream-ids for DPAA1 are reserved for future use.
Signed-off-by: Bharat Bhushan
This patch fixup iommu-map property on pci node to have
a valid mapping of requester-id to stream-id.
The requester-id to stream-id mapping is based on
PCI-LUT table initialization.
Signed-off-by: Bharat Bhushan
---
v1->v2
- Typo error in comment about phandle of MSI node rather than io
name for chassis-3 devices. This allows new SOCs,
ls2088, ls1088 etc to use same allocation mechanism.
v1->v2
- Patch 2/6 and 3/6 have changes describing iommu-map property
updates in PCI node
- Other patches are same
Bharat Bhushan (6):
fsl-lsch3: rename ls2080a_stream_id.h
> -Original Message-
> From: york sun
> Sent: Wednesday, March 22, 2017 9:50 PM
> To: Bharat Bhushan ; u-boot@lists.denx.de
> Cc: M.H. Lian ; s...@chromium.org; Z.Q. Hou
> ; Diana Madalina Craciun
>
> Subject: Re: [PATCH v2 1/6] fsl-lsch3: rename ls2080a_stream_i
The stream ID allocation for Chasis3.0 devices,
LS1088, LS2088 and LS2080, can be shared.
This patch renames this accordingly.
Signed-off-by: Bharat Bhushan
---
.../asm/arch-fsl-layerscape/ls2080a_stream_id.h| 77 --
.../asm/arch-fsl-layerscape/stream_id_lsch3.h
Layerscape Chasis-2 have PCIe device, some platform devices and
DPAA1 devices which will use stream-ids for iommu level isolation
as they lies behind SMMU.
This patch defines the stream-ids for Chasis-2 devices.
stream-ids for DPAA1 are reserved for future use.
Signed-off-by: Bharat Bhushan
Layerscape Chasis-2 also uses same PCIe controller
as used in Chasis-3 and have similar PCI-Lut.
We need to initialize the pcie-lut for Chasis-2 also
as in Chasis-3.
Signed-off-by: Bharat Bhushan
---
drivers/pci/pcie_layerscape_fixup.c | 4
1 file changed, 4 deletions(-)
diff --git a
First patch is rename the stream-id defination file to generic
so that this can be leveraged for new SOCs, ls2088, ls1088 etc.
Second add stream-ids allocation for NXP Chasis-2 based SOCs, ls1043, ls1046
etc.
and Third patch enables PCI-LUT initialization.
Bharat Bhushan (3):
fsl-lsch3
> -Original Message-
> From: york sun
> Sent: Monday, January 30, 2017 9:44 PM
> To: Bharat Bhushan ; Z.Q. Hou
> ; M.H. Lian ; u-
> b...@lists.denx.de
> Cc: albert.u.b...@aribaud.net; s...@chromium.org
> Subject: Re: [PATCH 1/3] fsl-lsch3: rename ls2080a_stream_i
From: Bharat Bhushan
Layerscape Chasis-2 also uses same PCIe controller
as used in Chasis-3 and have similar PCI-Lut.
We need to initialize the pcie-lut for Chasis-2 also
as in Chasis-3.
Signed-off-by: Bharat Bhushan
---
drivers/pci/pcie_layerscape_fixup.c | 4 ++--
1 file changed, 2
LS2080a, LS1088a and LS2088a SOCs are based on Chassis-3
and shared same stream-id partitioning. This patch
rewords the definition to support all these SOCs.
Signed-off-by: Bharat Bhushan
---
arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h | 12 ++--
1 file changed, 6
name for chassis-3 devices. This allows new SOCs,
ls2088, ls1088 etc to use same allocation mechanism.
Bharat Bhushan (6):
fsl-lsch3: rename ls2080a_stream_id.h to stream_id_lsch3.h
fsl-lsch3: Rewording to support other Chassis-3 Socs
pcie-layerscape: Define stream-ids for Layerscape Chassis-2
The stream ID allocation for Chasis3.0 devices,
LS1088, LS2088 and LS2080, can be shared.
This patch renames this accordingly.
Signed-off-by: Bharat Bhushan
---
.../asm/arch-fsl-layerscape/{ls2080a_stream_id.h => stream_id_lsch3.h} | 0
include/configs/ls2080a_commo
Layerscape Chassis-2 have PCIe device, some platform devices and
DPAA1 devices which will use stream-ids for iommu level isolation as
they lies behind SMMU.
This patch defines the stream-ids for Chassis-2 devices.
stream-ids for DPAA1 are reserved for future use.
Signed-off-by: Bharat Bhushan
As ls1012a is Chassis-2 type SOC and shares same streamid
definition, this patch adds using streamids for ls1012a
Signed-off-by: Bharat Bhushan
---
include/configs/ls1012a_common.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/ls1012a_common.h b/include/configs
This patch fixup iommu-map property on pci node to have
a valid mapping of requester-id to stream-id.
The requester-id to stream-id mapping is based on
PCI-LUT table initialization.
Signed-off-by: Bharat Bhushan
---
drivers/pci/pcie_layerscape_fixup.c | 53
As ls1046a is Chassis-2 type SOC and shares same streamid
definition, this patch adds using streamids for ls1046
Signed-off-by: Bharat Bhushan
---
include/configs/ls1046a_common.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/ls1046a_common.h b/include/configs
"pci: layerscape: Fixup device tree node for ls2088a" added
support for LS208xA devices but fixing iommu-map property
is missing. This patch adds support for fixing iommu-map.
Signed-off-by: Bharat Bhushan
Signed-off-by: Ioana Ciornei
---
drivers/pci/pcie_layerscape_fi
51 matches
Mail list logo
