On 2/15/24 17:57, Max Resch wrote:
A RNG driver for Armada 3720 boards running the Turris Mox rWTM firmware
from CZ.NIC in the secure processor.
Signed-off-by: Max Resch
---
Changes in v5:
- check return code turris_rwtm_rng_fill_entropy
- remove empty line
Changes in v4:
- wrongful/mis
On 15/02/2024 21:10, Tom Rini wrote:
> First, since this document was written the biggest challenges at the
> time are simply not applicable anymore. Second, we need to list the
> challenges which are preventing more platforms from being able to be
> built with Clang today. Next, we update the gen
On 15/02/2024 21:10, Tom Rini wrote:
> The first big issue is that the "gcc" file talked a lot about the
> general build requirements as well, but was titled in a gcc-centric
> manner. Solve this by renaming the file to compile.rst and more fully
> reflecting that it is general build instructions.
Hi Heinrich,
[...]
> }
> + .rela.dyn : { *(.rela.dyn) }
> + .rela.plt : { *(.rela.plt) }
> + .rela.got : { *(.rela.got) }
> + .rela.data : { *(.rela.data) *(.rela.data*) }
Why are we switching from Rel to Rela?
> _etext = .;
> _text_size = . - _te
In udma_probe() the return value of setup_resources() is stored in the
u32 "ch_count" member of "struct udma_dev", due to which any negative
return value which indicates an error is masked.
Fix this by storing the return value of setup_resources() in the already
declared integer variable "ret", fo
On 14/02/2024 13:32, Sumit Garg wrote:
> On Wed, 14 Feb 2024 at 03:01, Paul Barker
> wrote:
>> On 02/02/2024 13:05, Sumit Garg wrote:
>>> +Dependencies
>>> +
>>> +
>>> +The DT schema project must be installed in order to validate the DT schema
>>> +binding documents and validate DTS f
Hi Quentin：
在 2024-02-15 20:42:56，"Quentin Schulz"
写道：
>Hi Andy,
>
>On 2/15/24 12:55, Andy Yan wrote:
>> [You don't often get email from andys...@163.com. Learn why this is
>> important at https://aka.ms/LearnAboutSenderIdentification ]
>>
>> Hi Quentin：
>> At 2024-02-15 18:40:25, "Quentin S
On Fri, Feb 16, 2024 at 12:20:14AM +0100, Heinrich Schuchardt wrote:
>
>
> Am 15. Februar 2024 23:00:32 MEZ schrieb Tom Rini :
> >On Thu, Feb 15, 2024 at 10:53:59PM +0100, Heinrich Schuchardt wrote:
> >>
> >>
> >> Am 15. Februar 2024 22:28:24 MEZ schrieb Tom Rini :
> >> >On Thu, Feb 15, 2024 at
On Fri, Feb 16, 2024 at 10:06:03AM +, Paul Barker wrote:
> On 15/02/2024 21:10, Tom Rini wrote:
> > First, since this document was written the biggest challenges at the
> > time are simply not applicable anymore. Second, we need to list the
> > challenges which are preventing more platforms fro
On Fri, Feb 16, 2024 at 10:10:19AM +, Paul Barker wrote:
> On 15/02/2024 21:10, Tom Rini wrote:
> > The first big issue is that the "gcc" file talked a lot about the
> > general build requirements as well, but was titled in a gcc-centric
> > manner. Solve this by renaming the file to compile.rs
On 2/15/24 20:31, Sean Anderson wrote:
On 2/15/24 14:08, Michal Simek wrote:
On 2/15/24 18:19, Sean Anderson wrote:
Currently, when we boot from JTAG we try to boot U-Boot from RAM.
However, this is a bit tricky to time, since the debugger has to wait
for SPL to initialize RAM before it ca
> Date: Fri, 16 Feb 2024 00:38:25 +0100
> From: Heinrich Schuchardt
>
> Am 16. Februar 2024 00:25:34 MEZ schrieb Mark Kettenis :
> >Moving the efi_carve_out_dt_rsv() call in commit 1be415b21b2d
> >("efi_loader: create memory reservations in ACPI case")
> >broke boards that create additional memor
On 16.02.24 2:18 PM, Tom Rini wrote:
On Fri, Feb 16, 2024 at 12:20:14AM +0100, Heinrich Schuchardt wrote:
Am 15. Februar 2024 23:00:32 MEZ schrieb Tom Rini :
On Thu, Feb 15, 2024 at 10:53:59PM +0100, Heinrich Schuchardt wrote:
Am 15. Februar 2024 22:28:24 MEZ schrieb Tom Rini :
On Thu, Fe
On 2/16/24 14:48, Michal Simek wrote:
On 2/15/24 20:31, Sean Anderson wrote:
On 2/15/24 14:08, Michal Simek wrote:
On 2/15/24 18:19, Sean Anderson wrote:
Currently, when we boot from JTAG we try to boot U-Boot from RAM.
However, this is a bit tricky to time, since the debugger has to wa
On Fri, Feb 16, 2024 at 04:00:27PM +0100, Heinrich Schuchardt wrote:
> On 16.02.24 2:18 PM, Tom Rini wrote:
> > On Fri, Feb 16, 2024 at 12:20:14AM +0100, Heinrich Schuchardt wrote:
> > >
> > >
> > > Am 15. Februar 2024 23:00:32 MEZ schrieb Tom Rini :
> > > > On Thu, Feb 15, 2024 at 10:53:59PM +01
On 14:33-20240215, Neha Malcom Francis wrote:
[...]
> > if the templates are abstract enough, the additional code will be so
> > minimal that we wont need a board-binman.dtsi - just u-boot.dtsi and
> > r5.dtsi can include the relevant templates.
> >
> > Hope this helps.
>
>
> So I took a stab a
On 2/16/24 10:06, Michal Simek wrote:
>
>
> On 2/16/24 14:48, Michal Simek wrote:
>>
>>
>> On 2/15/24 20:31, Sean Anderson wrote:
>>> On 2/15/24 14:08, Michal Simek wrote:
On 2/15/24 18:19, Sean Anderson wrote:
> Currently, when we boot from JTAG we try to boot U-Boot from RAM.
>
On 2/16/24 11:03, Sean Anderson wrote:
> On 2/16/24 10:06, Michal Simek wrote:
>>
>>
>> On 2/16/24 14:48, Michal Simek wrote:
>>>
>>>
>>> On 2/15/24 20:31, Sean Anderson wrote:
On 2/15/24 14:08, Michal Simek wrote:
>
>
> On 2/15/24 18:19, Sean Anderson wrote:
>> Currently, when
If multiple messages are written, line-feeds improve the readability.
Fixes: c40b6df87fc0 ("clk: Add SiFive FU540 PRCI clock driver")
Signed-off-by: Heinrich Schuchardt
---
drivers/clk/analogbits/wrpll-cln28hpc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/c
wrpll_configure_for_rate() might fail. We should check the return value.
Fixes: d56d79ed27c6 ("drivers: clk: add fu740 support")
Signed-off-by: Heinrich Schuchardt
---
drivers/clk/sifive/sifive-prci.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/sifive/sifiv
On Thu, Feb 15, 2024 at 08:52:37PM +, Caleb Connolly wrote:
> db820c predated support for prepending the kernel image header
> automatically, drop it's custom linker script and head.S in favour of
> this generic support.
>
> Reviewed-by: Neil Armstrong
> Signed-off-by: Caleb Connolly
> ---
>
simplefb was using old style FDT parsing which doesn't behave well in
combination with livetree. Update it to use ofnode instead and add a
missing null check for the "format" property.
Standardise the error logging while we're here.
Fixes: 971d7e64245d ("video: simplefb")
Signed-off-by: Caleb Con
The existing code is unnecessarily convoluted:
Arrays __prci_init_clocks_fu[5|7]40 are initialized with data.
In separate includes fu[5|7]40-prci.h the size of the arrays is provided as
constants.
By moving the structures prci_clk_fu[5|7]40 to the respective code modules
we can directly use ARRA
Change to use a common FIT load order, same-as-spl > SD-card > eMMC on
RK3328 boards. Only EVB and Radxa ROCK Pi E is affected by this change.
Signed-off-by: Jonas Karlman
Reviewed-by: Dragan Simic
---
v2:
- No change
- Collect r-b tag
---
arch/arm/dts/rk3328-nanopi-r2c-plus-u-boot.dtsi |
This series contains miscellaneous updates to defconfigs, syncs latest
device trees from linux, fixes an issue loading FIT from SD-card when
running SPL from eMMC and enables building a bootable SPI image on
RK3328 boards.
I am also adding myself as a reviewer for the three RK3328 boards I own.
P
Update defconfig for rk3328-rock64 with new defaults.
Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM. Also
Update defconfig for rk3328-roc-cc with new defaults.
Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM. Also
Update defconfig for rk3328-evb with new defaults.
Add DM_RESET=y to support using reset signals.
Remove the xPL_DRIVERS_MISC=y option, no misc driver is used in xPL.
Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue lo
Update defconfig for rk3328-rock-pi-e with new defaults.
Remove the xPL_DRIVERS_MISC=y option, no misc driver is used in xPL.
Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM. A
Update defconfig for rk3328-nanopi-r2* boards with new defaults.
Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or
The U-Boot driver try to base the gpio bank id on the gpio-ranges prop
and fall back to base the bank id on the node name. However, the linux
driver try to base the bank id on the gpio alias id and fall back on
node order.
This can cause issues when SoC DT is synced from linux and gpioX@ nodes
has
Sync rk3328 device tree from linux v6.8-rc1.
Signed-off-by: Jonas Karlman
---
v2:
- No change
---
arch/arm/dts/rk3328-evb.dts | 1 +
arch/arm/dts/rk3328-nanopi-r2s.dts | 3 +-
arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts | 4 +-
arch/arm/dts/rk3328-orangepi-r1-plus.
Update defconfig for rk3328-orangepi-r1-plus boards with new defaults.
Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to D
When RK3328 boards run SPL from eMMC and fail to load FIT from eMMC due
to it being missing or checksum validation fails there is a fallback to
read FIT from SD-card. However, without proper pinctrl configuration
reading FIT from SD-card will fail:
U-Boot SPL 2024.04-rc1 (Feb 05 2024 - 22:18:22
This reverts commit 3523c07867b403d5b3b68812aebac8a5afa5be4c.
Booting from SPI was already allowed before this commit was first
introduced. A few lines further down the exact same code already existed
and still does.
Signed-off-by: Jonas Karlman
---
v2:
- No change
---
arch/arm/mach-rockchip/sp
Add Kconfig options to enable support for booting from SPI NOR flash on
Pine64 Rock64.
The generated bootable u-boot-rockchip-spi.bin can be written to 0x0 of
SPI NOR flash. The FIT image is loaded from 0x6, same as on RK35xx
boards.
=> sf probe
SF: Detected gd25q128 with page size 256 By
Add Kconfig options to enable support for booting from SPI NOR flash on
Orange Pi R1 Plus boards.
The generated bootable u-boot-rockchip-spi.bin can be written to 0x0 of
SPI NOR flash. The FIT image is loaded from 0x6, same as on RK35xx
boards.
=> sf probe
SF: Detected zb25vq128 with page
Similar to RK35xx the BootRom in RK3328 can read all data and look for
idbloader at 0x8000, same as it does for SD and eMMC.
Use the rksd format and modify the mkimage offset to generate a bootable
u-boot-rockchip-spi.bin that can be written to 0x0 of SPI NOR flash.
Signed-off-by: Jonas Karlman
Replace the rockchip,cryptov1-rng compatible with compatibles used in
the linux device tree for RK3288, RK3328 and RK3399 to ease sync of SoC
device tree from linux.
Signed-off-by: Jonas Karlman
Reviewed-by: Heinrich Schuchardt
---
v2:
- No change
- Collect r-b tag
---
arch/arm/dts/rk3328-u-boo
With the stack and text base used by U-Boot SPL and proper on RK3328 and
RK3399 there is a high likelihood of overlapping when U-Boot proper +
FDT nears 1 MiB in size.
Trying to run U-Boot proper close to 1 MiB in size with debug logging
something similar to following can be observed:
FDT 0
With the stack and text base used by U-Boot SPL and proper on RK3399
there is a high likelihood of overlapping when U-Boot proper + FDT nears
1 MiB in size.
Currently the following memory layout is used:
- 0x (@0 MiB): U-Boot SPL text base
- 0x0004 (@256 KiB): TF-A
- 0x0020 (@2 MiB
With the stack and text base used by U-Boot SPL and proper on RK3328
there is a high likelihood of overlapping when U-Boot proper + FDT nears
1 MiB in size.
Currently the following memory layout is used:
- 0x (@0 MiB): U-Boot SPL text base
- 0x0004 (@256 KiB): TF-A
- 0x0020 (@2 MiB
Hello Nishanth,
On Fri, 2023-08-25 at 13:02 -0500, Nishanth Menon wrote:
> Switch to using bootstd. Note with this change, we will stop using
> distro_bootcmd and instead depend entirely on bootflow method of
> starting the system up.
>
> Suggested-by: Tom Rini
> Suggested-by: Simon Glass
> Rev
Hi Jonas,
On Sat, Feb 17, 2024 at 8:23 AM Jonas Karlman wrote:
>
> Update defconfig for rk3328-nanopi-r2* boards with new defaults.
>
> Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
>
> Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
> of FIT images.
44 matches
Mail list logo
