Add description for fifo-depth parameter that can be used
in the device tree.
Signed-off-by: Pei Yue Ho
Reviewed-by: Wei Liang Lim
Reviewed-by: Eng Lee Teh
---
doc/device-tree-bindings/i2c/i2c-cdns.txt | 4
1 file changed, 4 insertions(+)
diff --git a/doc/device-tree-bindings/i2c/i2c-cdn
V2:
Added 'i2c_bus' parameter to function 'cdns_is_hold_quirk' to fix
compilation issue
Enable driver to fetch the optional parameter (fifo-depth) from device
tree. If the parameter is not found in the device tree, it will use
the default value declared in the driver.
Pei Yue Ho (2):
dt-bindi
Enable driver to fetch the optional parameter (fifo-depth) from device
tree. If the parameter is not found in the device tree, it will use
the default value declared in the driver.
Signed-off-by: Pei Yue Ho
Reviewed-by: Wei Liang Lim
Reviewed-by: Eng Lee Teh
---
drivers/i2c/i2c-cdns.c | 30 +++
Hi,
Patch 1 fixes issue reported in [1], which happens on odroid-u2 and
probably other devices in that family. Re-adding this quirk was
discussed already by Jaehoon and Andy in the patch that
(re-)introduced this issue [2], but I do not think a patch was sent
for it.
Patch 2 fixes issue reported
Otherwise non-ChromeOS samsung devices, like the odroid boards, are
stuck in a bootloop if CONFIG_CROS_EC is not enabled:
<...>
MMC: SAMSUNG SDHCI: 2, EXYNOS DWMMC: 0
Loading Environment from MMC... *** Warning - bad CRC, using default
environment
cros-ec communications failure -
This reverts commit a034ec06ff1d558bbe11d5ee05edbb4de3ee2215.
Commit 4a3ea75de4c5 ("Revert "mmc: sdhci: set to INT_DATA_END when
there are data"") reverted the alternative fix that was added for
Exynos 4 devices, causing an error when trying to boot from an sdcard:
<...>
Loading Environme
> From: Leo Yu-Chi Liang(梁育齊)
> Sent: Thursday, February 09, 2023 4:34 PM
> To: u-boot@lists.denx.de
> Cc: Rick Jian-Zhi Chen(陳建志) ; Peter Yu-Chien Lin(林宇謙)
> ; Leo Yu-Chi Liang(梁育齊)
> Subject: [PATCH 1/2] riscv: Rename Andes cpu and board names
>
> The current ae350-related defconfigs could als
> From: Leo Yu-Chi Liang(梁育齊)
> Sent: Thursday, February 09, 2023 4:34 PM
> To: u-boot@lists.denx.de
> Cc: Rick Jian-Zhi Chen(陳建志) ; Peter Yu-Chien Lin(林宇謙)
> ; Leo Yu-Chi Liang(梁育齊)
> Subject: [PATCH 2/2] riscv: ae350: Adjust the memory layout of ae350
>
> Signed-off-by: Leo Yu-Chi Liang
> ---
On 2/10/23 22:08, Tony Dinh wrote:
When DM_SERIAL is enabled, the device-tree tag u-boot,dm-pre-reloc is
required for this board to boot over UART with kwboot. Enable this in
kirkwood-pogoplug-series-4-u-boot.dtsi.
Signed-off-by: Tony Dinh
Reviewed-by: Stefan Roese
Thanks,
Stefan
---
a
From: Xiang W
The maximum hart number is 32 and is determined by
the type of gd->arch.available_harts. However, various
RISC-V specifications allow the hart number to be greater
than 32. We can eliminate this limitation through bitmaps.
The patch modifies the upper bound of the hart number to 40
Hi Xiang,
On Sat, Feb 11, 2023 at 10:11:31PM +0800, Xiang W wrote:
> 在 2023-02-10星期五的 07:25 +，Leo Liang写道：
> > Hi Xiang,
> >
> > On Fri, Feb 03, 2023 at 03:24:37PM +0100, David Abdurachmanov wrote:
> > > On Mon, Jan 3, 2022 at 1:13 PM Leo Liang wrote:
> > > >
> > > > On Thu, Dec 30, 2021 at
Am 2023-02-13 09:43, schrieb Stefan Roese:
On 2/10/23 22:08, Tony Dinh wrote:
When DM_SERIAL is enabled, the device-tree tag u-boot,dm-pre-reloc is
required for this board to boot over UART with kwboot. Enable this in
kirkwood-pogoplug-series-4-u-boot.dtsi.
Signed-off-by: Tony Dinh
Reviewed-
Hello Pei,
On 13.02.23 09:02, Pei Yue Ho wrote:
> Add description for fifo-depth parameter that can be used
> in the device tree.
>
> Signed-off-by: Pei Yue Ho
> Reviewed-by: Wei Liang Lim
> Reviewed-by: Eng Lee Teh
> ---
> doc/device-tree-bindings/i2c/i2c-cdns.txt | 4
> 1 file changed,
Hello Pei,
On 13.02.23 09:02, Pei Yue Ho wrote:
> Enable driver to fetch the optional parameter (fifo-depth) from device
> tree. If the parameter is not found in the device tree, it will use
> the default value declared in the driver.
>
> Signed-off-by: Pei Yue Ho
> Reviewed-by: Wei Liang Lim
>
Hi Michael,
On 2/13/23 09:48, Michael Walle wrote:
Am 2023-02-13 09:43, schrieb Stefan Roese:
On 2/10/23 22:08, Tony Dinh wrote:
When DM_SERIAL is enabled, the device-tree tag u-boot,dm-pre-reloc is
required for this board to boot over UART with kwboot. Enable this in
kirkwood-pogoplug-series-
Den 2023-02-12 kl. 23:40, skrev Marek Vasut:
On 2/12/23 23:07, Ulf Samuelsson wrote:
Den 2023-02-12 kl. 21:01, skrev Marek Vasut:
> On 2/12/23 20:52, Ulf Samuelsson wrote:
>>
>>
>> Den 2023-02-12 kl. 20:31, skrev Marek Vasut:
>> > On 2/11/23 11:07, u-b...@emagii.com wrote:
>> >
>> >
Hi Heinrich,
On Mon, 13 Feb 2023 at 16:44, Heinrich Schuchardt wrote:
>
> On 2/13/23 06:50, Masahisa Kojima wrote:
> > On Fri, 10 Feb 2023 at 20:57, Heinrich Schuchardt
> > wrote:
> >>
> >> On 2/2/23 10:24, Masahisa Kojima wrote:
> >>> Current eficonfig_print_msg() does not show the return
> >>
On 2/13/23 10:42, Masahisa Kojima wrote:
Hi Heinrich,
On Mon, 13 Feb 2023 at 16:44, Heinrich Schuchardt wrote:
On 2/13/23 06:50, Masahisa Kojima wrote:
On Fri, 10 Feb 2023 at 20:57, Heinrich Schuchardt wrote:
On 2/2/23 10:24, Masahisa Kojima wrote:
Current eficonfig_print_msg() does not
From: Frieder Schrempf
In [1] Michael agreed on taking patches for SPI NAND through the RAW
NAND tree. Add a dedicated entry to the MAINTAINERS file which adds
Michael and Dario as maintainers and myself as reviewer.
[1] https://lists.denx.de/pipermail/u-boot/2023-February/508571.html
Signed-of
From: Frieder Schrempf
As there are other types of NAND flashes like SPI NAND, let's be
more specific.
Signed-off-by: Frieder Schrempf
---
MAINTAINERS | 14 +++---
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index e40c401337..00ad83a8c7 10064
On 10.02.23 12:57, Michael Nazzareno Trimarchi wrote:
> Hi
>
> I will review
>
> On Thu, Feb 9, 2023 at 5:52 PM Tom Rini wrote:
>>
>> On Thu, Feb 09, 2023 at 10:24:47AM +0100, Frieder Schrempf wrote:
>>> Hi,
>>>
>>> On 10.01.23 12:58, Frieder Schrempf wrote:
From: Mikhail Kshevetskiy
On Mon, 13 Feb 2023 at 18:46, Heinrich Schuchardt wrote:
>
> On 2/13/23 10:42, Masahisa Kojima wrote:
> > Hi Heinrich,
> >
> > On Mon, 13 Feb 2023 at 16:44, Heinrich Schuchardt
> > wrote:
> >>
> >> On 2/13/23 06:50, Masahisa Kojima wrote:
> >>> On Fri, 10 Feb 2023 at 20:57, Heinrich Schuchardt
On Mon, Feb 13, 2023 at 12:36 AM Simon Glass wrote:
>
> Hi,
>
> On Thu, 19 Jan 2023 at 00:00, Stefan Roese wrote:
> >
> > On 1/17/23 15:08, Robert Marko wrote:
> > > Currently, pinctrl drivers are getting probed during post-bind, however
> > > that is being reverted, and on A37XX pinctrl driver i
Hello! Thierry, may you check if these patches do not break anything on your
boards. I have tested them on my devices (T20 and T30) without any
issues. I am especially interested in T124 pre-dm i2c changes, iirc
you have a board I have changed.
Best Regards.
Svyatoslav R.
пт, 10 лют. 2023 р. о 18
Hi Stefano
On Wed, Feb 8, 2023 at 9:15 AM Dario Binacchi
wrote:
>
> The Linux kernel device tree already specifies the device to be used for
> boot console output with a stdout-path property under /chosen.
>
> Commit 36b661dc919da ("Merge branch 'next'") re-added the console
> setting that commit
On 13.02.23 14:28, Michael Nazzareno Trimarchi wrote:
Hi Stefano
On Wed, Feb 8, 2023 at 9:15 AM Dario Binacchi
wrote:
The Linux kernel device tree already specifies the device to be used for
boot console output with a stdout-path property under /chosen.
Commit 36b661dc919da ("Merge branch 'n
The ftwdt010 watchdog driver was deleted by
commit 11232139e399 ("nds32: Remove the architecture")
Return it to the codebase in a DM compatible form. Enable it in
sandbox_defconfig to test compilability.
Another platform using ftwdt010 will be submitted later.
Signed-off-by: Sergei Antonov
---
From: qianfan Zhao
Portting sun8i_thermal.c from linux-5.15 drivers and drop interrupt
features. Next is an example from allwinner T3:
=> temperature get thermal-sensor@1c24c00
thermal-sensor@1c24c00: 39437 C
=>
thermal-sensor@1c24c00: 39776 C
=>
thermal-sensor@1c24c00: 39437 C
Signed-off-by: q
From: qianfan Zhao
Add clock/reset definitions for THS peripherals.
Signed-off-by: qianfan Zhao
---
drivers/clk/sunxi/clk_h3.c | 5 +
drivers/clk/sunxi/clk_h6.c | 4
drivers/clk/sunxi/clk_r40.c | 5 +
3 files changed, 14 insertions(+)
diff --git a/drivers/clk/sunxi/clk_h3.c b/d
The ocotp driver is available for regular and SPL builds using the
(SPL_)MXC_OCOTP configuration. Also, the ocotp driver does not support
the driver model (DM) configuration.
But, for SPL builds, the SPL_MXC_OCOTP configuration depends on
SPL_MISC which implies on SPL_DM.
This commit replaces the
On 1/27/23 22:49, Heinrich Schuchardt wrote:
A command called with incorrect parameters should set $? to 1 (false).
Instead of calling cmd_usage(cmdtp) and then returning 0 just return
CMD_RET_FAILURE.
Signed-off-by: Heinrich Schuchardt
Applied to u-boot-marvell/master
Thanks,
Stefan
---
On 1/31/23 23:06, Tony Dinh wrote:
CONFIG_SYS_NS16550 is required when DM_SERIAL is enabled for
Kirkwood boards.
Signed-off-by: Tony Dinh
Applied to u-boot-marvell/master
Thanks,
Stefan
---
arch/arm/mach-kirkwood/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach
On 2/2/23 00:13, Tony Dinh wrote:
Thecus N2350 is a NAS based on Marvell Armada 385 SoC.
Specification:
- Processor: Marvel MV88F6820 Dual Core at 1GHz
- 1 GiB DDR4 RAM
- 4MB Macronix mx25l3205d SPI flash
- 512MB Hynix H27U4G8F2DTR-BC NAND flash
- I2C
- 2x USB 3.0
- 1x GBE LAN port (PHY: Marvel
On 2/2/23 23:16, Tony Dinh wrote:
Sheevaplug board has 512K CONFIG_BOARD_SIZE_LIMIT. Recently, DM_SERIAL has
pushed the image size a few hundred bytes over that limit. So explicitly
deselect some configs that are unrelated to this board
(and gain back a bit over 2K).
Signed-off-by: Tony Dinh
On 2/7/23 02:00, Tony Dinh wrote:
Currently, only the 1st SATA port is powered up (by GPIO1 12).
Add GPIO1 13 in board initialization to power up the 2nd SATA port.
Note that this patch depends on the initial add-support patch:
https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010
On 2/10/23 22:08, Tony Dinh wrote:
When DM_SERIAL is enabled, the device-tree tag u-boot,dm-pre-reloc is
required for this board to boot over UART with kwboot. Enable this in
kirkwood-pogoplug-series-4-u-boot.dtsi.
Signed-off-by: Tony Dinh
Applied to u-boot-marvell/master
Thanks,
Stefan
--
On 2/9/23 23:00, Tony Dinh wrote:
Synology DS116 is a NAS based on Marvell Armada 385 SoC.
Board Specification:
- Marvel MV88F6820 Dual Core at 1.8GHz
- 1 GiB DDR3 RAM
- 8MB Macronix mx25l6405d SPI flash
- I2C
- 2x USB 3.0
- 1x GBE LAN port (PHY: Marvell 88E1510)
- 1x SATA (6 Gbps)
- 3x LED
- P
Hi Tom,
please pull this next batch of Marvell related patches.
- mvebu: Support for 2 new Armada 385 boards (Tony)
- mvebu: Minor misc board enhancements (Tony)
- kirkwood: Serial driver fixes (Kconfig & dtsi) (Tony)
- cmd: return
The MTD framework reserves 1 or 2 bytes for the bad block marker
depending on the bus size. The rockchip_nfc driver currently only
supports a 8 bit bus, but reserves standard 2 bytes for the BBM.
The first free OOB byte is therefore OOB2 at offset 2.
Page address(PA) bytes are moved to the last 4 p
Hi Michal,
On Mon, 13 Feb 2023 at 00:53, Michal Simek wrote:
>
>
>
> On 2/12/23 18:44, Tom Rini wrote:
> > On Fri, Feb 10, 2023 at 08:28:56AM -0700, Simon Glass wrote:
> >
> >> Add a CONFIG option to deal with this automatically, printing a warning
> >> when U-Boot starts up. This can be useful i
On Mon, 13 Feb 2023 at 01:08, Henrik Grimler wrote:
>
> Otherwise non-ChromeOS samsung devices, like the odroid boards, are
> stuck in a bootloop if CONFIG_CROS_EC is not enabled:
>
> <...>
> MMC: SAMSUNG SDHCI: 2, EXYNOS DWMMC: 0
> Loading Environment from MMC... *** Warning - bad CRC
Hello Fabio,
On 03.01.23 20:03, Fabio Estevam wrote:
> Printing the I2C controller base address in decimal notation
> is not helpful.
>
> Change it to hex notation, which is the standard format found
> in the Reference Manual and devicetree.
>
> Signed-off-by: Fabio Estevam
> Acked-by: Dhruva G
Hello Ryan,
On 30.01.23 07:19, Ryan Chen wrote:
> Add i2c new register mode driver to support AST2600 i2c
> new register mode. AST2600 i2c controller have legacy and
> new register mode. The new register mode have global register
> support 4 base clock for scl clock selection, and new clock
> divi
Hello Ryan,
On 30.01.23 07:19, Ryan Chen wrote:
> The i2c driver have global register that i2c bus use
> ofnode_get_parent to get parent register address.
>
> Signed-off-by: Ryan Chen
> Reviewed-by: Heiko Schocher
> ---
> arch/arm/dts/ast2600.dtsi | 1 +
> 1 file changed, 1 insertion(+)
Appl
Hello Pei Yue Ho,
On 04.01.23 08:20, Pei Yue Ho wrote:
> Add description for fifo-depth parameter that can be used
> in the device tree.
>
> Signed-off-by: Pei Yue Ho
> Reviewed-by: Wei Liang Lim
> Reviewed-by: Eng Lee Teh
> Reviewed-by: Heiko Schocher
> ---
> doc/device-tree-bindings/i2c/i2
Hello Pei Yue Ho,
On 04.01.23 08:20, Pei Yue Ho wrote:
> Enable driver to fetch the optional parameter (fifo-depth)
> from device tree. If the parameter is not found in the device
> tree, it will use the default value declared in the driver.
>
> Signed-off-by: Pei Yue Ho
> Reviewed-by: Wei Liang
Hello Tom,
please pull from u-boot-i2c:
The following changes since commit a5e490f14e904fd240ccec5d364509b36a3150f9:
socfpga: fix the serial console on DE1-SoC (2023-02-12 15:47:19 -0500)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-i2c.git
tags/
Hi Ignatius,
On 2/10/23 17:05, Simon Glass wrote:
Hi Ignatius,
On Thu, 9 Feb 2023 at 17:29, Ignatius Rivaldi wrote:
Added more debug logging and for some reason the nvme driver tries to bind
to pcie root bridge instead of the SSD
drivers/pinctrl/pinctrl-uclass.c:300-pinctrl_select_state_simp
On Sun, Feb 12, 2023 at 12:08 PM Tom Rini wrote:
>
> On Sun, Feb 12, 2023 at 12:02:26PM -0600, Adam Ford wrote:
> > On Sun, Feb 12, 2023 at 11:47 AM Tom Rini wrote:
> > >
> > > On Sun, Feb 12, 2023 at 11:36:38AM -0600, Adam Ford wrote:
> > >
> > > > Beacon Embedded has an i.MX8M Plus development
On Sun, Feb 12, 2023 at 05:57:35PM -0600, Adam Ford wrote:
> Beacon Embedded has an i.MX8M Plus development kit which consists
> of a SOM + baseboard. The SOM includes Bluetooth, WiFi, QSPI, eMMC,
> and one Ethernet PHY. The baseboard includes audio, HDMI, USB-C Dual
> Role port, USB Hub with fiv
ROCK 3 Model A is rk3568 based soc board from Radxa, Add board support in
u-boot. Booting logs is accessible at https://paste.ubuntu.com/p/v9BNrB7MdM/
Akash Gajjar (1):
arm64: dts: rockchip: rk3568: Add Radxa ROCK 3 Model A board support
arch/arm/dts/Makefile | 3 +-
arch/
Add Radxa ROCK 3 Model A support. sync rk3568-rock-3a.dts from Linux 6.2.0-rc7
Board Specifications
- Rockchip RK3568
- 2/4/8GB LPDDR4 3200MT/s
- eMMC socket, SD card slot
- GbE LAN
- PCIe 3.0/2.0
- M.2 Connector
- 3.5mm Audio jack with mic
- HDMI 2.0, MIPI DSI/CSI
- USB 3.0 Host/OTG, USB 2.0 Host
U-Boot has some particular challenges with device tree and devices:
- U-Boot has multiple build phases, such as a Secondary Program Loader
(SPL) phase which typically runs in a pre-SDRAM environment where code
and data space are limited. In particular, there may not be enough
space for the f
Add a CONFIG option to deal with this automatically, printing a warning
when U-Boot starts up. This can be useful if the device tree comes from
another project.
We will maintain this through the 2023.07 release, providing 6 months
for people to notice.
Signed-off-by: Simon Glass
Version 4:
Acked
This is useful when we need to control a particular environment variable.
Add a way to handle this.
Signed-off-by: Simon Glass
---
(no changes since v4)
Changes in v4:
- Add new patch with a way to set the environment for a pytest
test/py/multiplexed_log.py | 5 +++--
test/py/u_boot_utils.py
Help ensure that these don't creep into development by adding a check in
checkpatch for them.
Signed-off-by: Simon Glass
---
(no changes since v3)
Changes in v3:
- Add a new patch to warn about pre-schema driver model tags
scripts/checkpatch.pl | 6 ++
tools/patman/test_checkpat
Now that Linux has accepted these tags, move U-Boot over to use them.
Signed-off-by: Simon Glass
---
(no changes since v1)
doc/device-tree-bindings/chosen.txt | 2 +-
.../clock/rockchip,rk3368-dmc.txt | 2 +-
.../clock/rockchip,rk3399-dmc.txt | 2 +-
.../cl
Now that Linux has accepted these tags, move U-Boot over to use them.
Tidy up the comments and formatting, making sure that VPL is mentioned
too.
Signed-off-by: Simon Glass
---
Changes in v5:
- Add a note to the SPL file about the migration
doc/README.TPL| 4 +-
Update various build and test components to use the new schema.
Signed-off-by: Simon Glass
---
(no changes since v1)
drivers/core/ofnode.c| 10 +-
drivers/video/video-uclass.c | 4 ++--
dts/Kconfig | 2 +-
include/dm/device.h | 2 +-
These should not be used anymore. Add a check to ensure they don't creek
back into U-Boot. Use bootph-... instead.
Signed-off-by: Simon Glass
---
(no changes since v3)
Changes in v3:
- Add a new patch to check for pre-schema driver model tags in CI
.azure-pipelines.yml | 12
.git
Test that:
- sandbox shows a warning when an unmigrated DT is used
- sandbox fails to run when migration is turned off
- sandbox_spl fails to build when migration is turned off
Signed-off-by: Simon Glass
---
Changes in v5:
- Ensure that the old tags are supported in each commit of this series
Now that a new schema has been accepted upstream, press it into service in
U-Boot.
Changes in v5:
- Move this patch earlier in the series and make it additive
- Add a note to the SPL file about the migration
- Ensure that the old tags are supported in each commit of this series
Changes in v4:
- A
ROCK Pi S is rk3308 soc based board from Radxa. Add board support in u-boot.
Booting logs is accessible at https://paste.ubuntu.com/p/cJDRzBRdXq/
Akash Gajjar (1):
arm64: dts: rockchip: rk3308: Add Radxa ROCK Pi S support
arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi | 17 ++
arch/arm/dts/rk3308-
Add Radxa ROCK 3 Model A support. sync rk3308-rock-pi-s.dts from
Linux 6.2.0-rc7.
ROCK Pi S is RK3308 based SBC from radxa.com. ROCK Pi S has a,
- 256MB/512MB DDR3 RAM
- SD, NAND flash (optional on board 1/2/4/8Gb)
- 100MB ethernet, PoE (optional)
- Onboard 802.11 b/g/n wifi + Bluetooth 4.0 Module
Convert the documentation for the Broadcom BCM7445 and BCM7260 boards
to reStructuredText format and add the new filename to
doc/board/broadcom/index.rst.
---
Changes in v2:
- Remove "About this" heading
doc/README.bcm7xxx | 156
doc/board/broadcom/bcm7xx
On Mon, Feb 13, 2023 at 03:01:25PM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull this next batch of Marvell related patches.
>
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Mon, Feb 13, 2023 at 03:52:55PM +0100, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c:
>
> The following changes since commit a5e490f14e904fd240ccec5d364509b36a3150f9:
>
> socfpga: fix the serial console on DE1-SoC (2023-02-12 15:47:19 -0500)
>
> are available in the G
On Mon, Feb 13, 2023 at 10:19:09AM +0530, Sumit Garg wrote:
> Co-developed-by: Mike Worsfold
> Signed-off-by: Mike Worsfold
> Signed-off-by: Sumit Garg
I don't see this originally in patchwork, and I didn't check
lore.kernel.org, I'm not sure what happened. With that, applied to
u-boot/master,
On Sun, Feb 12, 2023 at 05:37:09PM -0700, Simon Glass wrote:
> Hi Tom,
>
> https://source.denx.de/u-boot/custodians/u-boot-dm/-/pipelines/15164
>
>
> The following changes since commit a5e490f14e904fd240ccec5d364509b36a3150f9:
>
> socfpga: fix the serial console on DE1-SoC (2023-02-12 15:47:
Modern mobile phones typically have high pixel density.
Bootmenu is hardly readable on those with 8x16 font.
This patch series aims to add wider fonts for devices with high ppi.
Add 16x32, 12x22 fonts from linux, and allow font size configuration.
There was significant changes in version 3:
- fi
Unite console_normal.c and console_rotate.c files.
Those files have similar logic, and common logic
may be extracted after putting code in single file.
Signed-off-by: Dzmitry Sankouski
---
Changes for v2:
- none
drivers/video/Kconfig | 8 +-
drivers/video/Makefile
Devices with high ppi may benefit from wider fonts.
Current width implementation is limited by 1 byte, i.e. 8 bits.
New version iterates VIDEO_FONT_BYTE_WIDTH times, to process all
width bytes, thus allowing fonts wider than 1 byte.
Signed-off-by: Dzmitry Sankouski
---
Charges for v2:
- replace
Select font logic at runtime needed to unit test different fonts.
This commit is a preparation to enable runtime font selection in
console_simple driver.
- move console true type select font logic to driver ops
- add select font logic to vidconsole-uclass.c
Signed-off-by: Dzmitry Sankouski
---
C
- get rid of code duplications in switch across bpp values
- extract common pixel fill logic in two functions one per
horizontal and vertical filling
- rearrange statements in put_xy* methods in unified way
- replace types - uint*_t to u*
Signed-off-by: Dzmitry Sankouski
---
Changes for v2:
- mov
Tests fonts wider than a byte.
Signed-off-by: Dzmitry Sankouski
---
Changes for v2: N/A
configs/sandbox_defconfig | 3 +++
test/dm/video.c | 41 +++
2 files changed, 44 insertions(+)
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconf
On 2/13/23 16:56, Simon Glass wrote:
Add a CONFIG option to deal with this automatically, printing a warning
when U-Boot starts up. This can be useful if the device tree comes from
another project.
We will maintain this through the 2023.07 release, providing 6 months
for people to notice.
Si
For version 3 patches:
Summary of 8 commits for 1232 boards (4 threads, 1 job per thread)
01: video console: unite normal and rotated files
02: video console: refactoring and optimization
sandbox: (for 1/7 boards) all -64.0 text -64.0
03: video console: add support for fonts wider than 1 byte
0
Now that Linux has accepted these tags, update the dtoc tool to use them.
Signed-off-by: Simon Glass
---
(no changes since v1)
tools/dtoc/dtb_platdata.py | 10 +-
tools/dtoc/test/dtoc_test_add_prop.dts | 4 ++--
tools/dtoc/test/dtoc_test_addr32.dts
On Fri, 10 Feb 2023 09:05:34 -0700
Simon Glass wrote:
Hi Simon,
> On Fri, 10 Feb 2023 at 04:32, Lothar Waßmann wrote:
> >
> > Hi,
> >
> > On Fri, 10 Feb 2023 11:02:13 + Andre Przywara wrote:
> > > Explicitly specifying the exact filenames of devicetree overlays files
> > > on a U-Boot com
In case ID is not found in manufacturer table, the raw ID is
printed using %*phN format which is not supported by lib/vsprintf.c.
The information displayed doesn't reflect the raw ID return by the
unknown spi-nand.
Use %02x format instead, as done in spi-nor-core.c.
For example, before this patch
The fttmr010 timer driver was deleted by
commit 29fc6f24926e ("ARM: remove a320evb board support")
The original source file was: arch/arm/cpu/arm920t/a320/timer.c
Return the driver to the codebase in a DM compatible form.
A platform using fttmr010 will be submitted later.
This hardware is describ
Move board/gateworks/venice/README to RST documentation.
Signed-off-by: Tim Harvey
---
board/gateworks/venice/MAINTAINERS| 1 +
board/gateworks/venice/README | 35 ---
doc/board/gateworks/imx8mm_venice.rst | 50 +++
doc/board/gateworks/imx8mn_
On Mon, Feb 13, 2023 at 1:12 AM Stefan Roese wrote:
>
> Hi Michael,
>
> On 2/13/23 09:48, Michael Walle wrote:
> > Am 2023-02-13 09:43, schrieb Stefan Roese:
> >> On 2/10/23 22:08, Tony Dinh wrote:
> >>> When DM_SERIAL is enabled, the device-tree tag u-boot,dm-pre-reloc is
> >>> required for this
Hi Andre,
On Mon, 13 Feb 2023 at 10:26, Andre Przywara wrote:
>
> On Fri, 10 Feb 2023 09:05:34 -0700
> Simon Glass wrote:
>
> Hi Simon,
>
> > On Fri, 10 Feb 2023 at 04:32, Lothar Waßmann
> > wrote:
> > >
> > > Hi,
> > >
> > > On Fri, 10 Feb 2023 11:02:13 + Andre Przywara wrote:
> > > > Exp
On Feb 13 2023, Qu Wenruo wrote:
> On 2023/2/13 00:20, Andreas Schwab wrote:
>> When I print ce->size in __btrfs_map_block, it is almost always
>> 1073741824, which looks bogus.
>>
> Can you provide the image of that filesystem?
How do I do that?
--
Andreas Schwab, sch...@linux-m68k.org
GPG Ke
We should not scan beyond the end of string name.
Signed-off-by: Heinrich Schuchardt
---
lib/efi_loader/efi_var_mem.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/lib/efi_loader/efi_var_mem.c b/lib/efi_loader/efi_var_mem.c
index e1058e3c6a..d6b65aed12 100644
--- a/lib/e
Thank you so much, you made my day! Sorry, I didn't see the alias was
used different.
Although my credibility gambled away I think I found a real bug in EQOS
driver with fixed-phy:
In file fixed.c in in function fixedphy_config() the call
val = ofnode_read_u32_default(node, "speed", 0);
Hi Elmar,
On Mon, Feb 13, 2023 at 4:46 PM Elmar Psilog wrote:
>
> Thank you so much, you made my day! Sorry, I didn't see the alias was
> used different.
Glad to know it is working.
> Although my credibility gambled away I think I found a real bug in EQOS
> driver with fixed-phy:
>
> In file fi
On 2/13/23 02:46, Chunfeng Yun (云春峰) wrote:
On Fri, 2023-02-10 at 11:32 +0100, Marek Vasut wrote:
On 2/10/23 09:33, Chunfeng Yun wrote:
[...]
@@ -50,6 +50,27 @@
#define IPPC_U3_CTRL(p) (IPPC_U3_CTRL_0P + ((p) * 0x08))
#define IPPC_U2_CTRL(p) (IPPC_U2_CTRL_0P + ((p) * 0x08))
On Feb 13 2023, Qu Wenruo wrote:
> diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
> index 4aaaeab663f5..7d4095d9ca88 100644
> --- a/fs/btrfs/volumes.c
> +++ b/fs/btrfs/volumes.c
> @@ -956,6 +956,7 @@ int __btrfs_map_block(struct btrfs_fs_info *fs_info, int
> rw,
> struct btrfs_mapping
Hello,
Think I found a regression in EQOS driver with fixed-phy. Maybe someone
with a imx8mp board might check that use case to confirm? That would be
great.
While ethernet was working in v2022.04 a "ping" in v2023.01 returns
ERROR: no/invalid property!
invalid speed 0 eqos_adjust_link() failed:
Adding Marek, who has sent some EQOS patches recently.
On Mon, Feb 13, 2023 at 6:02 PM Elmar Psilog wrote:
>
> Hello,
> Think I found a regression in EQOS driver with fixed-phy. Maybe someone
> with a imx8mp board might check that use case to confirm? That would be
> great.
> While ethernet was w
On 2/13/23 04:08, Kunihiko Hayashi wrote:
Hi Marek,
Hello Hayashi-san,
On 2023/02/10 23:09, Marek Vasut wrote:
On 2/8/23 10:15, Kunihiko Hayashi wrote:
[...]
+static int uniphier_usb3phy_init(struct phy *phy)
+{
+ struct uniphier_usb3phy_priv *priv = dev_get_priv(phy->dev);
+ int re
On 2/13/23 22:04, Fabio Estevam wrote:
Adding Marek, who has sent some EQOS patches recently.
On Mon, Feb 13, 2023 at 6:02 PM Elmar Psilog wrote:
Hello,
Think I found a regression in EQOS driver with fixed-phy. Maybe someone
with a imx8mp board might check that use case to confirm? That would
From: Chris Morgan
This series is to lay the groundwork to improve support for the RK3566
based devices. This syncs the devicetrees with upstream Linux and adds
support for the pin controller of the rk356x series.
Future patches will be submitted that builds on top of this to support
devices suc
From: Chris Morgan
Use the new devicetree property of gpio-ranges to determine the GPIO
bank ID. Preserve the "old" way of doing things too, so that boards
can be migrated and tested gradually (I only have a 3566 and 3326 to
test).
Signed-off-by: Chris Morgan
---
drivers/gpio/rk_gpio.c | 20 ++
From: Chris Morgan
Add the gpio-ranges property to each GPIO node for use in deriving
the correct bank ID. Note that invoking "gpio status -a" no longer
causes the board to hit a "Synchronous Abort".
Fixes: 537b1a277479 ("rockchip: add px30 devicetrees")
Signed-off-by: Chris Morgan
---
arch/a
From: Chris Morgan
In order to support Rockchip devices with the VOP2, import the VOP2
dt-bindings from Linux.
Signed-off-by: Chris Morgan
Reviewed-by: Kever Yang
---
include/dt-bindings/soc/rockchip,vop2.h | 14 ++
1 file changed, 14 insertions(+)
create mode 100644 include/dt-b
From: Chris Morgan
Enable spl to detect which device it was booted from.
Signed-off-by: Peter Geis
Signed-off-by: Chris Morgan
---
arch/arm/mach-rockchip/rk3568/rk3568.c | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/mach-rockchip/rk3568/rk3568.c
b/arch/arm/mach-rockchip
From: Chris Morgan
It enables automatic clock gating on idle, disables the eDP phy by
default, and sets the core pvtpll ring length. It is reported this
lowers the temperature on at least one SoC by 7C.
Signed-off-by: Peter Geis
Signed-off-by: Chris Morgan
---
arch/arm/mach-rockchip/rk3568/rk
1 - 100 of 115 matches
Mail list logo
