On 2/10/23 22:08, Tony Dinh wrote:
When DM_SERIAL is enabled, the device-tree tag u-boot,dm-pre-reloc is
required for this board to boot over UART with kwboot. Enable this in
kirkwood-pogoplug-series-4-u-boot.dtsi.
Signed-off-by: Tony Dinh <mibo...@gmail.com>
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
---
arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
create mode 100644 arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi
diff --git a/arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi
b/arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi
new file mode 100644
index 0000000000..f9e127234c
--- /dev/null
+++ b/arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2023 Tony Dinh <mibo...@gmail.com>
+ */
+&uart0 {
+ u-boot,dm-pre-reloc;
+};
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
