Setup proper ETH/MMC dependency for the whole platform.
Signed-off-by: Michal Simek
---
arch/arm/Kconfig | 2 ++
configs/avnet_ultra96_rev1_defconfig | 2 --
configs/xilinx_zynqmp_mini_emmc0_defconfig | 1 -
configs/xilinx_zynqmp_mini_emmc1_defc
From: Siva Durga Prasad Paladugu
This patch enable net configs for zc1275 board.
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek
---
Depends on fixed phy patches.
---
configs/xilinx_zynqmp_zc1275_revB_defconfig | 4
1 file changed, 4 insertions(+)
diff --git a/co
On Thu, 2019-01-03 at 21:15 +0100, Marek Vasut wrote:
> On 1/3/19 6:36 AM, Chee, Tien Fong wrote:
> >
> > On Tue, 2019-01-01 at 21:29 +0100, Marek Vasut wrote:
> > >
> > > On 1/1/19 4:32 AM, Chee, Tien Fong wrote:
> > > >
> > > >
> > > > On Sun, 2018-12-30 at 16:47 +0100, Marek Vasut wrote:
> >
Hi Tom,
> On Mon, Jan 14, 2019 at 03:17:30PM +0100, Lukasz Majewski wrote:
> > This commit provides update to the bk4r1.dts file with
> > more on SoC HW description.
> > Moreover, a new vf610-pcm052.drsi file has been introduced
> > to reuse the common code between devices based on Phytec's
> > pc
Setup proper ETH/MMC dependency for the whole platform.
Signed-off-by: Michal Simek
---
arch/arm/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 271d883d99ff..8346b172ac61 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -931,6 +931
On 15.01.19 08:07, Michal Simek wrote:
> On 07. 01. 19 23:59, Tom Rini wrote:
>> On Mon, Jan 07, 2019 at 09:15:17PM +0100, Alexander Graf wrote:
>>>
>>>
>>> On 07.01.19 18:13, Tom Rini wrote:
On Mon, Jan 07, 2019 at 05:57:10PM +0100, Alexander Graf wrote:
> On 01/07/2019 01:46 PM, Michal
On 15. 01. 19 9:54, Alexander Graf wrote:
>
>
> On 15.01.19 08:07, Michal Simek wrote:
>> On 07. 01. 19 23:59, Tom Rini wrote:
>>> On Mon, Jan 07, 2019 at 09:15:17PM +0100, Alexander Graf wrote:
On 07.01.19 18:13, Tom Rini wrote:
> On Mon, Jan 07, 2019 at 05:57:10PM +0100, Alex
On 15.01.19 09:56, Michal Simek wrote:
> On 15. 01. 19 9:54, Alexander Graf wrote:
>>
>>
>> On 15.01.19 08:07, Michal Simek wrote:
>>> On 07. 01. 19 23:59, Tom Rini wrote:
On Mon, Jan 07, 2019 at 09:15:17PM +0100, Alexander Graf wrote:
>
>
> On 07.01.19 18:13, Tom Rini wrote:
>>>
On Thu, Nov 22, 2018 at 10:06 AM Simon Goldschmidt
wrote:
>
> With CONFIG_REGEX enabled, ETHADDR_WILDCARD is set up for up to 10
> interfaces (0..9) as the number can only have one digit.
>
> On boards with more than 10 interfaces, this leads to the protection
> and format checks being absent for
On Thu, Nov 22, 2018 at 9:58 AM Simon Goldschmidt
wrote:
>
> ETHADDR_WILDCARD is defined as the same value in both env_flags.h
> and env_callback.h
>
> As env_callback.h includes env_flags.h, remove the duplicate definition
> from env_callback.h
>
> Signed-off-by: Simon Goldschmidt
Acked-by: Joe
> Am 15.01.2019 um 03:55 schrieb AKASHI Takahiro :
>
> This patch set is a collection of patches to enhance efi user interfaces
> /commands. It will help improve user experience on efi boot and make it
> more usable *without* edk2's shell utility.
Thanks a lot again. This is invaluable for efi_
On 15/01/2019 02:05, Kever Yang wrote:
> HI Jack,
>
>
> On 01/15/2019 01:28 AM, Jack Mitchell wrote:
>> I'm having issues flashing the emmc on my firefly board using USB. For
>> some reason it seems as though trying to write to the emmc flash sector
>> 0x40 for uboot spl+proper from the Maskrom/Loa
Reviewed-by: Igor Opaniuk
On Wed, 12 Dec 2018 at 19:12, Ruslan Trofymenko
wrote:
>
> This sub-command serves for getting the partition index from
> partition name. Also it can be used to test the existence of specified
> partition.
>
> Signed-off-by: Ruslan Trofymenko
> Reviewed-by: Alistair St
On Mon, Jan 14, 2019 at 8:49 PM Douglas Zobel wrote:
>
> I've made some changes to the fastboot handlers to meet my needs. If there
> is interest, I can prepare patches and submit them upstream. The changes are:
>
> BUGFIX: Currently the 'fastboot format [partition]' command (run from PC)
> f
Reviewed-by: Igor Opaniuk
On Wed, 12 Dec 2018 at 19:12, Ruslan Trofymenko
wrote:
>
> Add a short documentation for A/B enablement and 'ab_select' command
> usage.
>
> Signed-off-by: Ruslan Trofymenko
> Reviewed-by: Alistair Strachan
> Reviewed-by: Sam Protsenko
> ---
> Changes in v2:
> * Сh
Hello Ruslan,
On Wed, 12 Dec 2018 at 19:12, Ruslan Trofymenko
wrote:
>
> For A/B system update support the Android boot process requires to send
> 'androidboot.slot_suffix' parameter as a command line argument. This
> patch implementes 'ab_select' command which allows us to obtain current
> slot
Select DM_SPI/DM_SPI_FLASH for the whole SoC.
Signed-off-by: Michal Simek
---
arch/arm/Kconfig | 2 ++
configs/avnet_ultra96_rev1_defconfig | 2 --
configs/xilinx_zynqmp_mini_qspi_defconfig | 2 --
configs/xilinx_zynqmp_zcu100_revC_defconfig | 2 --
c
Enable ISSI flash for platforms. Xilinx reference boards are also used
internally with different flash part to increase coverage that's why
enable also ISSI parts for all these boards even if that board is
released only with one part.
Signed-off-by: Michal Simek
---
configs/avnet_ultra96_rev1_d
Enable GQSPI driver, SF command and SPL support for some platforms.
Signed-off-by: Michal Simek
---
configs/xilinx_zynqmp_zc1232_revA_defconfig | 3 +++
configs/xilinx_zynqmp_zc1254_revA_defconfig | 3 +++
configs/xilinx_zynqmp_zc1275_revA_defconfig | 3 +++
configs/xilinx_zynqmp
All these boards have no SD enabled.
Signed-off-by: Michal Simek
---
configs/xilinx_zynqmp_zc1232_revA_defconfig | 2 +-
configs/xilinx_zynqmp_zc1254_revA_defconfig | 2 +-
configs/xilinx_zynqmp_zc1275_revA_defconfig | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/configs
Enable fpga load secure feature for xilinx platforms.
Signed-off-by: Michal Simek
---
configs/xilinx_zynqmp_zc1232_revA_defconfig | 1 +
configs/xilinx_zynqmp_zc1254_revA_defconfig | 1 +
configs/xilinx_zynqmp_zc1275_revA_defconfig | 1 +
configs/xilinx_zynqmp_zc1275_revB_defconf
Hi,
On Wed, 12 Dec 2018 at 19:12, Ruslan Trofymenko
wrote:
>
> This patch determines the A/B-specific bootloader message structure
> that is the basis for implementation of recovery and A/B update
> functions. A/B metadata is stored in this structure and used to decide
> which slot should we use
Reviewed-by: Igor Opaniuk
On Wed, 12 Dec 2018 at 19:12, Ruslan Trofymenko
wrote:
>
> Add support for A/B boot process on AM57xx based boards:
>
> 1. Define 'slot_suffix' variable (using 'ab_select' command)
> 2. Extend 'emmc_android_boot' boot command (add commands for A/B boot
> proces
On 1/15/19 12:07 PM, Abel Vesa wrote:
> Some boards might need USB_STORAGE enabled in u-boot proper but not in SPL.
> Make a separate config for SPL and keep the same depends on conditions but
> for SPL.
Is this new or is this something which worked before and broke in the
last few releases ? I r
On 1/15/19 9:16 AM, Chee, Tien Fong wrote:
> On Thu, 2019-01-03 at 21:15 +0100, Marek Vasut wrote:
>> On 1/3/19 6:36 AM, Chee, Tien Fong wrote:
>>>
>>> On Tue, 2019-01-01 at 21:29 +0100, Marek Vasut wrote:
On 1/1/19 4:32 AM, Chee, Tien Fong wrote:
>
>
> On Sun, 2018-12-30 at 1
This adds initial support for micro-DPU (uDPU) board which is based on
Armada-3720 SoC.
micro-DPU is the single-port FTTdp "distribution point unit" made by Methode
Electronics
which offers complete modularity with replaceable SFP modules both for uplink
and downlink
(G.hn over twisted-pair, G.h
Some boards might need USB_STORAGE enabled in u-boot proper but not in SPL.
Make a separate config for SPL and keep the same depends on conditions but for
SPL.
Signed-off-by: Abel Vesa
---
common/Makefile| 2 +-
configs/apalis_imx6_defconfig | 1 +
configs/colibri_imx6_defconfi
On 19-01-15 12:27:11, Marek Vasut wrote:
> On 1/15/19 12:07 PM, Abel Vesa wrote:
> > Some boards might need USB_STORAGE enabled in u-boot proper but not in SPL.
> > Make a separate config for SPL and keep the same depends on conditions but
> > for SPL.
>
> Is this new or is this something which w
Hello,
I tried to have mainline uboot for Z-turn board (patch sent in December,
wrong window: [PATCH] ARM: zynq: Adding ps7_init_gpl.c for Z-turn board)
Even with the right ps7_init_gpl.c : the board doesn't boot.
I tried to correct zynq-zturn.dts [0] because I don't find MYIR
references in d
With the new SPI NOR framework in v4.19, we need to adapt the MTD parts
so that the kernel cmdline parameter "mtdparts=" uses the correct naming
for the devices.
Signed-off-by: Stefan Roese
Cc: Daniel Schwierzeck
---
configs/gardena-smart-gateway-mt7688-ram_defconfig | 4 ++--
configs/gardena-s
Set the correct power-up state (default-state) of the green power LED.
Signed-off-by: Stefan Roese
Cc: Daniel Schwierzeck
---
arch/mips/dts/gardena-smart-gateway-mt7688.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/dts/gardena-smart-gateway-mt7688.dts
b/arch
There is no reason not to use the Linux "jedec,spi-nor" binding in u-boot.
This patchset :
- adds this compatible into sf_probe and will avoid changing the
device tree files to add a u-boot specific compatible to probe a spi flash.
- switches all DTS/DTSI files to "jedec,spi-nor"
- remove the "sp
There is no reason not to use the Linux "jedec,spi-nor" binding in u-boot.
This patch adds this compatible into sf_probe and will avoid changing the
device tree files to add a u-boot specific compatible to probe a spi flash.
This change is needed to enable SPI NOR Flash support using the non-modif
There is no reason not to use the Linux "jedec,spi-nor" binding in U-Boot
dts files. This compatible has been added in sf_probe, let use it.
This patch switches to jedec,spi-nor when spi-flash is used in the DTS
and DTSI files, and removed spi-flash when jedec,spi-nor is already
present.
The x86
The x86 code and DT uses "spi-flash" to detect a flash node, switch to
"jedec,spi-nor" in the DTS files and in fdtdec by switching the
GENERIC_SPI_FLASH value to to jedec,spi-nor.
Signed-off-by: Neil Armstrong
Reviewed-by: Simon Goldschmidt
---
arch/x86/dts/bayleybay.dts| 2
Since all DTS files has been switched to "jedec,spi-nor", remove
the "spi-flash" compatible from the bindings examples.
Signed-off-by: Neil Armstrong
Reviewed-by: Simon Goldschmidt
---
doc/device-tree-bindings/pinctrl/atmel,at91-pio4-pinctrl.txt | 2 +-
doc/device-tree-bindings/spi/spi-atcspi20
Now the "spi-flash" compatible has been removed in the DTS files,
remove this compatible from sf_probe to finally use the Linux "jedec,spi-nor"
compatible.
Signed-off-by: Neil Armstrong
Reviewed-by: Simon Goldschmidt
---
drivers/mtd/spi/sf_probe.c | 1 -
1 file changed, 1 deletion(-)
diff --gi
Hello Tom,
please pull from u-boot-i2c.git master
The following changes since commit d3689267f92c5956e09cc7d1baa4700141662bff:
Prepare v2019.01 (2019-01-14 17:02:36 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to 1d7b6
On 15/01/19 4:37 PM, Abel Vesa wrote:
> Some boards might need USB_STORAGE enabled in u-boot proper but not in SPL.
> Make a separate config for SPL and keep the same depends on conditions but
> for SPL.
>
> Signed-off-by: Abel Vesa
> ---
> common/Makefile| 2 +-
> configs/apa
Build warning was added by:
"fdt: Add warning about CONFIG_OF_EMBED"
(sha1: 841d5fbae4e993476fa87d8933db0cd58d3c2d41)
ZynqMP mini configurations are not moved yet and it is questionable if
make sense to move them too.
Signed-off-by: Michal Simek
---
Depends on the patch:
"tools: zynqimage: Alig
Build warning was added by:
"fdt: Add warning about CONFIG_OF_EMBED"
(sha1: 841d5fbae4e993476fa87d8933db0cd58d3c2d41)
Zynq mini configurations are not moved yet and it is questionable if
make sense to move them too.
Signed-off-by: Michal Simek
---
configs/syzygy_hub_defconfig| 1 -
con
Bootrom is not capable to work with non aligned bootloader sizes.
SPL with OF_SEPARATE generates non-align images quite often that's
why this change is required before OF_SEPARATE enableding.
Signed-off-by: Michal Simek
---
tools/zynqmpbif.c | 4 ++--
tools/zynqmpimage.c | 1 +
2 files change
On 01/15/2019 04:47 AM, Heinrich Schuchardt wrote:
On 1/15/19 3:55 AM, AKASHI Takahiro wrote:
"env [print|set] -e" allows for handling uefi variables without
knowing details about mapping to corresponding u-boot variables.
Why do we need two alternative ways to achieve the same result?
We alrea
On 01/15/2019 03:55 AM, AKASHI Takahiro wrote:
"env [print|set] -e" allows for handling uefi variables without
knowing details about mapping to corresponding u-boot variables.
Signed-off-by: AKASHI Takahiro
---
cmd/nvedit.c | 61 ++--
1 file ch
Some platforms choose to store device tree blob in Android image second
area. Let's try to look for dtb from there when booting an Android
image, and use it for booting if found.
Signed-off-by: Shawn Guo
---
common/image-fdt.c | 21 +
1 file changed, 21 insertions(+)
diff -
On Tue, Jan 08, 2019 at 06:16:31PM +0530, Faiz Abbas wrote:
> With DM conversion completed, enable CONFIG_BLK for a
> few pending TI boards.
>
> Signed-off-by: Faiz Abbas
> Reviewed-by: Lokesh Vutla
> ---
> configs/am335x_boneblack_vboot_defconfig | 1 -
> configs/am335x_evm_defconfig
The last parameter is expected to be the imagefile. Since -E is a
flag having the output name before -p will make mkimage ignore the
external offset option.
Signed-off-by: Patrick Wildt
---
Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index 6a
On 19-01-15 18:38:00, Vignesh R wrote:
>
>
> On 15/01/19 4:37 PM, Abel Vesa wrote:
> > Some boards might need USB_STORAGE enabled in u-boot proper but not in SPL.
> > Make a separate config for SPL and keep the same depends on conditions but
> > for SPL.
> >
> > Signed-off-by: Abel Vesa
> > --
Hi Tom,
https://travis-ci.org/sglass68/u-boot/builds
The following changes since commit d3689267f92c5956e09cc7d1baa4700141662bff:
Prepare v2019.01 (2019-01-14 17:02:36 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-dm.git tags/dm-pull-15jan19
for you to fetch chan
On Tue, Jan 15, 2019 at 11:07:23AM +, Abel Vesa wrote:
> Some boards might need USB_STORAGE enabled in u-boot proper but not in SPL.
> Make a separate config for SPL and keep the same depends on conditions but
> for SPL.
>
> Signed-off-by: Abel Vesa
> ---
> common/Makefile|
On Tue, Jan 15, 2019 at 04:05:43PM +, Abel Vesa wrote:
> On 19-01-15 11:02:09, Tom Rini wrote:
> > On Tue, Jan 15, 2019 at 11:07:23AM +, Abel Vesa wrote:
> >
> > > Some boards might need USB_STORAGE enabled in u-boot proper but not in
> > > SPL.
> > > Make a separate config for SPL and ke
This patchset adds support for CVBS and/or HDMI output for Amlogic
Meson GX SoCs (GXBB, GXL and GXM) based on the Linux Meson DRM driver
ported to the U-Boot Video DM model. It supports only the "DMT" video
modes reported by the monitors since AVI InfoFrame management is
missing from the U-Boot vid
From: Maxime Jourdan
MESON_GX_VPU_POWER_DOMAIN should depend on POWER_DOMAIN.
Signed-off-by: Maxime Jourdan
Signed-off-by: Neil Armstrong
---
drivers/power/domain/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/power/domain/Kconfig b/drivers/power/domain/Kc
From: Jorge Ramirez-Ortiz
Some IPs like the meson VPU can only feed a particular pixel format to
dw_hdmi. As of now, the driver is hardcoded to use RGB888 as input.
This commit enables different pixel format inputs, with the appropriate
CSC configuration.
Signed-off-by: Jorge Ramire-Ortiz
Sign
From: Jorge Ramirez-Ortiz
Some IPs like the meson VPU have a specific way to write to dw_hdmi
registers. Make it configurable.
Signed-off-by: Jorge Ramirez-Ortiz
[added commit description]
Signed-off-by: Maxime Jourdan
Signed-off-by: Neil Armstrong
---
drivers/video/dw_hdmi.c | 14 ++
From: Maxime Jourdan
There's no reliable way to reuse the hhi entry from the vpu as is done
in the linux kernel, so we duplicate it here.
We will be able to sync against kernel DTS in the future when the VPU
gets based on the clock framework rather than the HHI reg.
Signed-off-by: Maxime Jourda
From: Maxime Jourdan
If VIDEO_MESON is enabled, we need to setup the fdt for the framebuffer.
Call meson_vpu_rsv_fb() which reserves the framebuffer memory region for
EFI, and sets up simple-framebuffer nodes if simplefb support is
enabled.
Signed-off-by: Maxime Jourdan
Signed-off-by: Neil Arm
The hdmi_5v regulator must be enabled to provide power to the physical HDMI
PHY and enables the HDMI 5V presence loopback for the monitor.
Fixes: b409f625a6d5 ("ARM64: dts: meson-gx: Add HDMI_5V regulator on selected
boards")
Signed-off-by: Neil Armstrong
Signed-off-by: Kevin Hilman
[backport o
Allows displaying the console via video and using a USB keyboard.
Also enables CONFIG_SPLASH_SCREEN if using video.
Signed-off-by: Neil Armstrong
Signed-off-by: Maxime Jourdan
---
include/configs/meson64.h | 23 +++
1 file changed, 23 insertions(+)
diff --git a/include/con
From: Maxime Jourdan
Flag the appropriate nodes with u-boot,dm-pre-reloc
Signed-off-by: Maxime Jourdan
Signed-off-by: Neil Armstrong
---
arch/arm/dts/meson-gx-u-boot.dtsi | 15 +++
arch/arm/dts/meson-gxbb-nanopi-k2-u-boot.dtsi | 7 +++
arch/arm/dts/meson-g
From: Maxime Jourdan
libretech-cc being the main device tested with CONFIG_VIDEO_MESON, let's
enable it by default.
Also enable:
- CONFIG_SYS_WHITE_ON_BLACK for prettiness
- CONFIG_VIDEO_DT_SIMPLEFB for framebuffer sharing with kernel
Signed-off-by: Maxime Jourdan
Signed-off-by: Neil Armstro
From: Maxime Jourdan
With the recent addition of the meson VPU driver, enable the following
config entries by default for meson-64 targets: CONFIG_CONSOLE_MUX,
CONFIG_SYS_CONSOLE_IS_IN_ENV.
This allows outputting the console via video if CONFIG_VIDEO_MESON is
selected.
Signed-off-by: Maxime Jou
On 19-01-15 11:02:09, Tom Rini wrote:
> On Tue, Jan 15, 2019 at 11:07:23AM +, Abel Vesa wrote:
>
> > Some boards might need USB_STORAGE enabled in u-boot proper but not in SPL.
> > Make a separate config for SPL and keep the same depends on conditions but
> > for SPL.
> >
> > Signed-off-by:
On 19-01-15 11:10:51, Tom Rini wrote:
> On Tue, Jan 15, 2019 at 04:05:43PM +, Abel Vesa wrote:
> > On 19-01-15 11:02:09, Tom Rini wrote:
> > > On Tue, Jan 15, 2019 at 11:07:23AM +, Abel Vesa wrote:
> > >
> > > > Some boards might need USB_STORAGE enabled in u-boot proper but not in
> > >
Hi Keerthy,
On Mon, 14 Jan 2019 at 18:52, J, KEERTHY wrote:
>
>
>
> On 1/15/2019 6:23 AM, Simon Glass wrote:
> > Hi Keerthy,
> >
> > On Thu, 3 Jan 2019 at 21:39, Keerthy wrote:
> >>
> >>
> >>
> >> On Thursday 03 January 2019 11:44 PM, s...@google.com wrote:
> >>> On 12/21/18 9:24 AM, Keerthy wro
On some ocelots platform a workaround is needed in order to be able to
reset the switch without resetting the DDR.
Signed-off-by: Gregory CLEMENT
---
board/mscc/ocelot/ocelot.c | 28
1 file changed, 28 insertions(+)
diff --git a/board/mscc/ocelot/ocelot.c b/board/ms
This patch adds support for the Microsemi Ethernet switch present on
Ocelot SoCs.
Signed-off-by: Gregory CLEMENT
---
MAINTAINERS | 1 +
drivers/net/Kconfig | 7 +
drivers/net/Makefile| 1 +
drivers/net/ocelot_switch.c | 837 ++
Now that network support is added for the ocelot platform, let's add it
in the default configuration.
Signed-off-by: Gregory CLEMENT
---
configs/mscc_ocelot_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/mscc_ocelot_defconfig b/configs/mscc_ocelot_defconfig
index fb6a5bdc3
Hello,
this series allows to use the switch component of the Ocelots SoC as
a network interface.
The binding used is exactly the same of the one already used by Linux.
There is also a patch adding a workaround needed on the Ocelot based
boards: indeed the pin connected to the DDR reset is part o
Import Ethernet related nodes from Linux
Signed-off-by: Gregory CLEMENT
---
arch/mips/dts/mscc,ocelot.dtsi | 97 +
arch/mips/dts/ocelot_pcb123.dts | 20 +++
2 files changed, 117 insertions(+)
diff --git a/arch/mips/dts/mscc,ocelot.dtsi b/arch/mips/dts/mscc,o
This patch series adds sysreset drivers for MSCC SoCs. There are 3 drivers:
sysreset_jr2, sysreset_ocelot and sysreset_luton.
This is based off the u-boot-mips/next repository.
Horatiu Vultur (2):
MSCC: Add sysreset drivers for MSCC Socs
MSCC: Remove reset.c
MAINTAINERS
Add sysreset driver for Luton, Ocelot and Jaguar2 SoCs.
Signed-off-by: Horatiu Vultur
---
MAINTAINERS | 1 +
arch/mips/dts/mscc,jr2.dtsi | 7 +-
arch/mips/dts/mscc,luton.dtsi| 10 +++
arch/mips/dts/mscc,ocelot.dtsi | 5 ++
board/mscc/ocelot/ocelot.c |
Remove reset.c because it is not used anymore. It is superseed by
sysreset driver.
Signed-off-by: Horatiu Vultur
---
arch/mips/mach-mscc/Makefile | 2 +-
arch/mips/mach-mscc/include/mach/ddr.h | 18 -
arch/mips/mach-mscc/reset.c| 47
Hi Adam,
On 13/01/2019 15:00, Adam Ford wrote:
On Thu, Oct 4, 2018 at 12:55 PM Martin Fuzzey
wrote:
Configure the phy regulator if defined by the "phy-supply" DT phandle.
Signed-off-by: Martin Fuzzey
This patch seems to break the Ethernet on my board, but I think I have
a possible solution
On Tue, Jan 15, 2019 at 11:08 AM Martin Fuzzey
wrote:
>
> Hi Adam,
>
> On 13/01/2019 15:00, Adam Ford wrote:
> > On Thu, Oct 4, 2018 at 12:55 PM Martin Fuzzey
> > wrote:
> >> Configure the phy regulator if defined by the "phy-supply" DT phandle.
> >>
> >> Signed-off-by: Martin Fuzzey
> > This pa
When DM_REGULATOR is enabled, the driver attempts to call
regulator_autoset() which expects the regulators to be on at boot
and/or always on and fails if they are not true.
For a more generic approach, this patch just calls
regulator_set_enable() which shouldn't have such restrictions.
Fixes: ad8c
Hi Adam,
On 15/01/2019 18:26, Adam Ford wrote:
When DM_REGULATOR is enabled, the driver attempts to call
regulator_autoset() which expects the regulators to be on at boot
and/or always on and fails if they are not true.
For a more generic approach, this patch just calls
regulator_set_enable() wh
bananapi r2 can be booted from sd-card and emmc
saving the environment have to choose the storage
from which the device has booted
also the offset is set to 1MB to make sure env is written
to block "user data area" between uboot and first partition
https://www.fw-web.de/dokuwiki/lib/exe/fetch.php
On Tue, Jan 15, 2019 at 11:27 AM Adam Ford wrote:
>
> When DM_REGULATOR is enabled, the driver attempts to call
> regulator_autoset() which expects the regulators to be on at boot
> and/or always on and fails if they are not true.
> For a more generic approach, this patch just calls
> regulator_se
I have an i.MX6Q powered by the pfuze100 regulator with DM_PMIC,
DM_REGULATOR, and OF_CONTROL enabled along wtih CMD_REGULATOR and
CMD_PMIC.
Our device tree is configured to use the minimum and max voltage
ratings for the parts on the board, and not the absolute min and max
ratings for the PMIC it
On Tue, Jan 15, 2019 at 4:12 AM Alex Kiernan wrote:
> On Mon, Jan 14, 2019 at 8:49 PM Douglas Zobel
> wrote:
> >
> > I've made some changes to the fastboot handlers to meet my needs. If
> there is interest, I can prepare patches and submit them upstream. The
> changes are:
> >
> > BUGFIX: Cur
After flashing my boot.bin to nand I get the following output:
RomBOOT
Missing DTB
### ERROR ### Please RESET the board ###
I found the error message in fdtdec.c, but not sure what I am missing. I have
checked that my DTB is included in the boot.bin output. Any insight on what I
am missing?
On Mon, Dec 17, 2018 at 05:02:31PM +0800, Shawn Guo wrote:
> As requested by driver model migration plan, it adds driver model
> support, i.e. CONFIG_DM_MMC, for hi6220_dw_mmc driver.
>
> Signed-off-by: Shawn Guo
> ---
> drivers/mmc/hi6220_dw_mmc.c | 83 +
>
On Tue, Jan 15, 2019 at 08:58:58AM +0100, Lukasz Majewski wrote:
> Hi Tom,
>
> > On Mon, Jan 14, 2019 at 03:17:20PM +0100, Lukasz Majewski wrote:
> >
> > > This property is necessary to allow pinctrl configuration before
> > > relocation (uart, DDR pins).
> > >
> > > Separate file will facilitat
On Tue, Jan 15, 2019 at 09:20:16AM +0100, Lukasz Majewski wrote:
> Hi Tom,
>
> > On Mon, Jan 14, 2019 at 03:17:30PM +0100, Lukasz Majewski wrote:
> > > This commit provides update to the bk4r1.dts file with
> > > more on SoC HW description.
> > > Moreover, a new vf610-pcm052.drsi file has been int
On Thu, Dec 27, 2018 at 07:04:04PM +0530, Manivannan Sadhasivam wrote:
> From: Manivannan Sadhasivam
>
> Convert HiSilicon HI6220 MMC driver based on DWMMC IP to driver
> model.
>
> Signed-off-by: Manivannan Sadhasivam
> Reviewed-by: Simon Glass
> ---
>
> Changes in v2: Added Simon's Reviewe
On Mon, Dec 03, 2018 at 10:54:20PM +0100, Boris Brezillon wrote:
> The repeatable property is currently attached to the main command and
> sub-commands have no way to change the repeatable value (the
> ->repeatable field in sub-command entries is ignored).
>
> Replace the ->repeatable field by an
On Mon, Dec 03, 2018 at 10:54:18PM +0100, Boris Brezillon wrote:
> When auto-completing command arguments, the last argument is not
> necessarily the one we need to auto-complete. When the last character is
> a space, a tab or '\0' what we want instead is list all possible values,
> or if there's
On Mon, Dec 03, 2018 at 10:54:20PM +0100, Boris Brezillon wrote:
> The repeatable property is currently attached to the main command and
> sub-commands have no way to change the repeatable value (the
> ->repeatable field in sub-command entries is ignored).
>
> Replace the ->repeatable field by an
On Wed, Aug 08, 2018 at 01:20:29PM +0200, Marek Vasut wrote:
> Cache up to 4 kiB entries. 4 kiB is the default block size on ext4, yet
> the underlying block layer devices usually report support for 512B . In
> most cases, the 512B support is emulated (ie. SD cards, SSDs, USB sticks
> etc.) and th
On Mon, Dec 17, 2018 at 08:14:42PM +0100, Simon Goldschmidt wrote:
> Booting an image currently sets the environment variable "fdtaddr"
> by calling into 'cmd/fdt.c'. As a result, linking U-Boot fails if
> CMD_FDT is not enabled.
>
> Fix this by adding 'if (CONFIG_IS_ENABLED(CMD_FDT))' to the two
On Mon, Dec 03, 2018 at 10:54:21PM +0100, Boris Brezillon wrote:
> Most cmd/xxx.c source files expose several commands through a single
> entry point. Some of them are doing the sub-command parsing manually in
> their do_() function, others are declaring a table of sub-commands
> and then use find
On Mon, Dec 03, 2018 at 10:54:23PM +0100, Boris Brezillon wrote:
> And you get sub-command auto-completion for free.
>
> Signed-off-by: Boris Brezillon
> Reviewed-by: Tom Rini
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Mon, Dec 03, 2018 at 10:54:19PM +0100, Boris Brezillon wrote:
> Some commands have a table of sub-commands. With minor adjustments,
> complete_cmdv() is able to provide auto-completion for sub-commands
> (it's just about passing the table of commands instead of taking the
> global one).
> We re
On Tue, Dec 04, 2018 at 02:44:28PM +0100, Frank Wunderlich wrote:
> changes since v1: fixed bracket-style in if-else statement
>
> >From 47701fbea478ce09a5ef43d914261bf00eb50544 Mon Sep 17 00:00:00 2001
> From: Frank Wunderlich
> Date: Mon, 3 Dec 2018 15:32:58 +0100
> Subject: [PATCH] adding sav
On Mon, Dec 03, 2018 at 10:54:22PM +0100, Boris Brezillon wrote:
> It's way simpler this way, and we also gain auto-completion support for
> free (MTD name auto-completion has been added with mtd_name_complete())
>
> Signed-off-by: Boris Brezillon
> Reviewed-by: Tom Rini
Applied to u-boot/mast
On Thu, Jan 03, 2019 at 10:09:44PM +0100, Marek Vasut wrote:
> Make sure the block cache is cleared for the MMC device after it was
> reinitialized to avoid having any stale data in the cache, like e.g.
> partition tables or such.
>
> Signed-off-by: Marek Vasut
> Cc: Jaehoon Chung
Applied to u
On Thu, Dec 20, 2018 at 04:12:54PM +0800, Weijie Gao wrote:
> This patch adds ethernet gmac node for MT7623 with MT7530 gigabit switch.
>
> Signed-off-by: Mark Lee
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
_
On Thu, Dec 27, 2018 at 05:03:29PM +0100, Enric Balletbo i Serra wrote:
> To save more space, switch to simple malloc here.
>
> Signed-off-by: Enric Balletbo i Serra
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
On Mon, Dec 10, 2018 at 09:29:44PM +0800, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> Switching private data manual allocation to driver model auto allocation
> so users no longer need to deallocate themself because this would be
> deallocated by driver model when the device is no
1 - 100 of 150 matches
Mail list logo
