Some minor changes have been made to the AM3517-evm and the underlying
am3517.dtsi files. This patch re-sync's the DTS and DTSI files with
Linux.
Signed-off-by: Adam Ford
diff --git a/arch/arm/dts/am3517-evm.dts b/arch/arm/dts/am3517-evm.dts
index 98aadb0f81..1d158cfda1 100644
--- a/arch/arm/dt
The AM3517 is mostly am omap3, so this partch removes the custom
memory configurations and just uses the default common entries
for omap3 and armv7.
Signed-off-by: Adam Ford
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 0463e42048..4e7e5209d4 100644
--- a/include
In an effort to free up more resources in SPL and U-Boot, building
for Thumb shrinks the code side.
Before:
text data bss dec hex filename
685588 25808 275724 987120 f0ff0 u-boot
text data bss dec hex filename
55324 417 67460 123201 1e141 spl
README.omap3 has two options. For option 1, CONFIG_SYS_TEXT_BASE
is set to 0x8010. Option 2 lists 0x80008000. The existing
value is neither of these, so this patch makes it equivalent to
Option 1.
Signed-off-by: Adam Ford
diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_
在 2018-05-17四的 09:16 +0100，Andre Przywara写道：
> This series tries to solve three issues we currently have on
> Allwinner boards:
> - The DRAM sizing routine can only cope with power-of-two sized DRAM.
> - The DRAM sizing routine steps through all DRAM, possibly hitting
> secure
> memory.
> - The S
On Wed, Oct 10, 2018 at 09:27:07PM +0200, Marek Vasut wrote:
> Reword the documentation to make it clear the compatible string is now
> optional, yet still matching on it takes precedence over PCI IDs and
> PCI classes.
>
> Signed-off-by: Marek Vasut
> Cc: Simon Glass
> Cc: Tom Rini
> Reviewed
On Wed, Oct 10, 2018 at 09:27:06PM +0200, Marek Vasut wrote:
> The PCI controller can have DT subnodes describing extra properties
> of particular PCI devices, ie. a PHY attached to an EHCI controller
> on a PCI bus. This patch parses those DT subnodes and assigns a node
> to the PCI device instan
On Wed, Oct 10, 2018 at 09:27:09PM +0200, Marek Vasut wrote:
> Add test which checks if a PCI device described in DT with an
> entry and reg = <...> property, but without compatible string
> results in a valid U-Boot PCI udevice with the udevice.node
> populated with reference to this DT node. Als
On Wed, Oct 10, 2018 at 09:27:08PM +0200, Marek Vasut wrote:
> Add PCI entry without compatible string and with a DT node only with
> reg = <...> property into the DT. This is needed for the tests to
> verify whether such a setup creates an U-Boot PCI device with the
> DT node associated with it i
> From: Lukas Auer [mailto:lukas.a...@aisec.fraunhofer.de]
> Sent: Saturday, October 20, 2018 6:08 AM
> To: u-boot@lists.denx.de
> Cc: Bin Meng; Lukas Auer; Greentime Hu; Alexander Graf; Rick Jian-Zhi
> Chen(陳建志)
> Subject: [PATCH 18/30] riscv: invalidate the instruction cache before jumping
> to
On Mon, Oct 15, 2018 at 1:21 PM Bin Meng wrote:
>
> On Mon, Oct 8, 2018 at 11:07 PM York Sun wrote:
> >
> > On 10/08/2018 06:51 AM, Bin Meng wrote:
> > > Per T1040RM (Rev. 1, 08/2015), the value of
> > > FSL_CORENET_RCWSR13_MAC2_GMII_SEL_ENET_PORT is wrong
> > > and should be 0x0080 (bit 440
Add ahci compatible support for ls1088a soc.
Signed-off-by: Peng Ma
---
depend on:
- https://patchwork.ozlabs.org/patch/982386/
drivers/ata/sata_ceva.c | 22 ++
1 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/ata/sata_ceva.c b/drivers/ata/sa
One ls1088a, there is one SATA 3.0 advanced host controller interface
which is a high-performance SATA solution that delivers comprehensive
and fully-compliant generation 3 (1.5 Gb/s - 6.0 Gb/s) serial ATA
capabilities, in accordance with the serial ATA revision 3.0 of Serial
ATA International Orga
Enable related configs to support sata DM feature.
Signed-off-by: Peng Ma
---
configs/ls1088aqds_defconfig |5 +
configs/ls1088ardb_qspi_defconfig |5 +
2 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/configs/ls1088aqds_defconfig b/configs/ls1088aqds_defconfi
Add ahci compatible support for ls2080a soc.
Signed-off-by: Peng Ma
---
depend on:
- https://patchwork.ozlabs.org/patch/987497/
drivers/ata/sata_ceva.c |3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/drivers/ata/sata_ceva.c b/drivers/ata/sata_ceva.c
index fa867
One ls2080a, there is one SATA 3.0 advanced host controller interface
which is a high-performance SATA solution that delivers comprehensive
and fully-compliant generation 3 (1.5 Gb/s - 6.0 Gb/s) serial ATA
capabilities, in accordance with the serial ATA revision 3.0 of Serial
ATA International Orga
Enable related configs to support sata DM feature.
Signed-off-by: Peng Ma
---
configs/ls2080aqds_defconfig |5 +
configs/ls2080ardb_defconfig |5 +
2 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/configs/ls2080aqds_defconfig b/configs/ls2080aqds_defconfig
index 30
> -Original Message-
> From: Bin Meng [mailto:bmeng...@gmail.com]
> Sent: Monday, October 22, 2018 7:41 AM
> To: York Sun
> Cc: Poonam Aggrwal ; U-Boot Mailing List b...@lists.denx.de>
> Subject: Re: [PATCH 1/2] powerpc: t1040: Correct RCW MAC2_GMII_SEL value
>
> On Mon, Oct 15, 2018 a
Hi Poonam,
On Mon, Oct 22, 2018 at 11:43 AM Poonam Aggrwal wrote:
>
>
>
> > -Original Message-
> > From: Bin Meng [mailto:bmeng...@gmail.com]
> > Sent: Monday, October 22, 2018 7:41 AM
> > To: York Sun
> > Cc: Poonam Aggrwal ; U-Boot Mailing List > b...@lists.denx.de>
> > Subject: Re: [
On Fri, Oct 19, 2018 at 06:16:30PM +0800, Bin Meng wrote:
> Hi,
>
> On Fri, Oct 19, 2018 at 4:55 PM AKASHI Takahiro
> wrote:
> >
> > Define a missing CONFIG_SYS_SOC and move some CONFIG_SYS_* to a more
> > canonical place (i.e. under board).
> >
> > Signed-off-by: AKASHI Takahiro
> > ---
> > ar
The current distro_bootcmd has several issues regarding efi boot.
(See the patch#1 for details.)
Patch#1: fix distro's issues and make its intent clear
Patch#2,#3: address related issues on qemu-arm
Please note that patch#2 is now rebased on Bin's patch[1].
[1] https://lists.denx.de/pipermail/u-
The current scenario for default UEFI booting, scan_dev_for_efi, has
several issues:
* load dtb dynamically even if its loacation (device) is not the same
as BOOTEFI_NAME binary's, (reported by Alex)
* invoke 'bootmgr' only if BOOTEFI_NAME binary does exit even though
'bootmgr' can and should w
This variable, fdt_addr_t, is missing in the current qemu-arm.h while it
seems to be mandatory, at least, to run distro_bootcmd as expected.
So just add its definition. A size of 1MB would be enough.
Signed-off-by: AKASHI Takahiro
---
include/configs/qemu-arm.h | 1 +
1 file changed, 1 insertion
Define a missing CONFIG_SYS_SOC and move some CONFIG_SYS_* to a more
canonical place (i.e. under board).
Signed-off-by: AKASHI Takahiro
---
arch/arm/mach-qemu/Kconfig | 18 ++
board/emulation/qemu-arm/Kconfig | 6 ++
2 files changed, 16 insertions(+), 8 deletions(-)
d
Hi Takahiro,
On Mon, Oct 22, 2018 at 12:35 PM AKASHI Takahiro
wrote:
>
> On Fri, Oct 19, 2018 at 06:16:30PM +0800, Bin Meng wrote:
> > Hi,
> >
> > On Fri, Oct 19, 2018 at 4:55 PM AKASHI Takahiro
> > wrote:
> > >
> > > Define a missing CONFIG_SYS_SOC and move some CONFIG_SYS_* to a more
> > > can
On Thu, Oct 18, 2018 at 10:46:36AM +0200, Alexander Graf wrote:
>
>
> On 18.10.18 07:48, AKASHI Takahiro wrote:
> > On Wed, Oct 17, 2018 at 10:43:22AM +0200, Alexander Graf wrote:
> >>
> >>
> >> On 17.10.18 09:32, AKASHI Takahiro wrote:
> >>> With this patch applied, we will be able to selectivel
Hello Anatolij,
Am 18.10.2018 um 16:36 schrieb Anatolij Gustschin:
Output the register base address in hex notation.
Signed-off-by: Anatolij Gustschin
---
drivers/i2c/imx_lpi2c.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
builds fine on travis:
https://travis-ci.org/hsdenx
On Thu, Oct 18, 2018 at 10:39:30AM +0200, Alexander Graf wrote:
>
>
> On 18.10.18 09:57, AKASHI Takahiro wrote:
> > On Wed, Oct 17, 2018 at 10:40:26AM +0200, Alexander Graf wrote:
> >>
> >>
> >> On 17.10.18 09:32, AKASHI Takahiro wrote:
> >>> In this patch, helper functions for an load option var
Hi Lukas,
On Sat, Oct 20, 2018 at 6:08 AM Lukas Auer
wrote:
>
> Ignore all device tree binaries in arch/riscv/dts.
I don't think this patch is necessary.
>
> Signed-off-by: Lukas Auer
> ---
>
> arch/riscv/dts/.gitignore | 1 +
> 1 file changed, 1 insertion(+)
> create mode 100644 arch/riscv/
On Sat, Oct 20, 2018 at 6:09 AM Lukas Auer
wrote:
>
> Signed-off-by: Lukas Auer
> ---
>
> dts/Makefile | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Bin Meng
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/
On Sat, Oct 20, 2018 at 6:08 AM Lukas Auer
wrote:
>
> Ignore tools/prelink-riscv.
>
> Signed-off-by: Lukas Auer
> ---
>
> tools/.gitignore | 1 +
> 1 file changed, 1 insertion(+)
>
Reviewed-by: Bin Meng
___
U-Boot mailing list
U-Boot@lists.denx.de
ht
On Sat, Oct 20, 2018 at 6:09 AM Lukas Auer
wrote:
>
> CONFIG_PHYS_64BIT should be enabled on RV64I systems. Select it.
>
> Signed-off-by: Lukas Auer
> ---
>
> arch/riscv/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
Reviewed-by: Bin Meng
___
U-Bo
Hi Lukas,
On Sat, Oct 20, 2018 at 6:09 AM Lukas Auer
wrote:
>
> RISC-V defines the base integer instruction sets as RV32I and RV64I.
> Rename CPU_RISCV_32 and CPU_RISCV_64 to ARCH_RV32I and ARCH_64I to match
ARCH_RV64I
> this convention.
>
> Signed-off-by: Lukas Auer
> ---
>
> arch/riscv/Kcon
On 22.10.18 06:37, AKASHI Takahiro wrote:
> On Thu, Oct 18, 2018 at 10:46:36AM +0200, Alexander Graf wrote:
>>
>>
>> On 18.10.18 07:48, AKASHI Takahiro wrote:
>>> On Wed, Oct 17, 2018 at 10:43:22AM +0200, Alexander Graf wrote:
On 17.10.18 09:32, AKASHI Takahiro wrote:
> With th
34 matches
Mail list logo
