On Thu, Oct 19, 2017 at 05:40:20PM -0400, Rob Clark wrote:
> On Thu, Oct 19, 2017 at 7:43 AM, Maxime Ripard
> wrote:
> > On Thu, Oct 19, 2017 at 10:12:36AM +0100, Peter Robinson wrote:
> >> On Thu, Oct 19, 2017 at 10:06 AM, Peter Robinson
> >> wrote:
> >> > On Thu, Oct 19, 2017 at 10:01 AM, Maxi
Kever,
> On 20 Oct 2017, at 03:59, Kever Yang wrote:
>
> Hi Simon and Philipp.
>
> I would like to include Heiko who is maintainer of upstream kernel
> Rockchip SoC for this topic.
>
> For the driver related to grf, which including pinctrl, usb phy, gmac and
> many other modules, we woul
Hi Bin
> -Original Message-
> From: Bin Meng [mailto:bmeng...@gmail.com]
> Sent: Thursday, October 12, 2017 2:01 PM
> To: Ran Wang
> Cc: Albert Aribaud ; Prabhakar Kushwaha
> ; Ashish Kumar ;
> York Sun ; open list
> Subject: Re: [PATCH v3 1/5] arm64: layerscape: Move
> CONFIG_HAS_FSL_XH
Use Kconfig to select QE-HDLC and USB pin-mux.
Signed-off-by: Ran Wang
Reviewed-by: Bin Meng
---
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 7 +++
include/configs/ls1012afrdm.h | 4
include/configs/ls1012aqds.h | 4
include/configs/ls1012ardb.h
use Kconfig to select xhci accordingly.
Signed-off-by: Ran Wang
Reviewed-by: Bin Meng
---
drivers/usb/host/Kconfig | 6 ++
include/configs/ls1012afrdm.h | 1 -
include/configs/ls1012aqds.h | 1 -
include/configs/ls1012ardb.h | 1 -
include/configs/ls1021aiot.h | 1 -
include/configs
Because COMFIG_DM_USB has been enabled and will not use it anymore.
Signed-off-by: Ran Wang
Reviewed-by: Bin Meng
---
include/configs/ls1012afrdm.h | 5 -
include/configs/ls1012aqds.h | 3 ---
include/configs/ls1012ardb.h | 4
include/configs/ls1021aiot.h | 3 ---
include/configs/ls
Signed-off-by: Amrita Kumari
Signed-off-by: Ashish Kumar
Signed-off-by: Ran Wang
Reviewed-by: Bin Meng
---
configs/ls1088aqds_qspi_defconfig | 8
1 file changed, 8 insertions(+)
diff --git a/configs/ls1088aqds_qspi_defconfig
b/configs/ls1088aqds_qspi_defconfig
index 4b0d604fa0..a24a
Signed-off-by: Ashish Kumar
Signed-off-by: Amrita Kumari
Signed-off-by: Ran Wang
Reviewed-by: Bin Meng
---
arch/arm/dts/fsl-ls1088a.dtsi | 14 ++
configs/ls1088ardb_qspi_defconfig | 8
include/linux/usb/xhci-fsl.h | 2 +-
3 files changed, 23 insertions(+), 1 del
Fix the whitespace of PCI_LTSSM_L0 in fsl_pci.h
Signed-off-by: Bao Xiaowei
---
arch/powerpc/include/asm/fsl_pci.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/fsl_pci.h
b/arch/powerpc/include/asm/fsl_pci.h
index cad341e72c..970f3a48d5 100644
--- a
For some special reset times for longer pcie devices, the pcie device
may on polling compliance state, the RC considers the pcie device is
link up, but the pcie device is not link up, only the L0 state is link
up state.
Signed-off-by: Bao Xiaowei
---
arch/powerpc/include/asm/fsl_pci.h | 2 ++
d
Adjust the code structure, detail the function module function,
remove the redundancy code.
Signed-off-by: Bao Xiaowei
---
arch/powerpc/include/asm/fsl_pci.h | 1 +
drivers/pci/fsl_pci_init.c | 150 -
2 files changed, 83 insertions(+), 68 deletions(-
On Thu, Oct 19, 2017 at 09:30:09PM -0500, Scott Wood wrote:
> On Tue, Oct 17, 2017 at 10:00:45AM +0200, Kurt Kanzenbach wrote:
> > Currently the chipselect used to identify the corresponding NAND chip is
> > stored
> > at the controller and only set during fsl_ifc_chip_init(). This way, only
> >
Currently the chipselect used to identify the corresponding NAND chip is stored
at the controller and only set during fsl_ifc_chip_init(). This way, only the
last NAND chip is working, as the previous value of cs_nand gets overwritten.
In order to solve this issue the chipselect is computed on dem
On 10/14/2017 11:51 PM, Marek Vasut wrote:
> On 10/02/2017 11:15 AM, Jean-Jacques Hiblot wrote:
>>
>>
>> On 22/09/2017 16:42, Jaehoon Chung wrote:
>>> Dear JJ,
>>>
>>> On 09/21/2017 11:29 PM, Jean-Jacques Hiblot wrote:
This series brings support for HS200 and UHS modes to the mmc core.
It
Dear JJ
On 09/21/2017 11:29 PM, Jean-Jacques Hiblot wrote:
> This series brings support for HS200 and UHS modes to the mmc core.
> It has been tested with the hsmmc driver on several platforms (DRA7,
> AM57x, AM437x, beaglebone black, Atmel SAMA5D3 xplained). Some modifications
> are required in t
When CONFIG_DM_MMC=y, CONFIG_BLK should be selected, otherwise the
SD/eMMC card cannot be used.
Also, select CONFIG_DM_USB=y when CONFIG_USB=y to avoid build failure.
Tested on mx6slevk, mx7dsabresd and mx6ullevk.
Signed-off-by: Fabio Estevam
---
Changes since v1:
- Cover all imx boards
confi
On Fri, Oct 20, 2017 at 12:18 AM, Adam Ford wrote:
> Yes it did. Thank you
>
> I'll submit a patch. Should I indicate it 'fixes' that commit I
> referenced, or is there some other commit that I should reference?
I have just sent a patch that fixes the issue for all imx boards.
On 10/05/2017 03:18 PM, suni...@techveda.org wrote:
> From: Suniel Mahesh
>
> priv pointer should be freed before returning with an error value
> from exynos_dwmci_get_config().
>
> Signed-off-by: Suniel Mahesh
> Signed-off-by: Raghu Bharadwaj
Applied to u-boot-mmc.
Best Regards,
Jaehoon Chu
On 10/05/2017 03:02 PM, suni...@techveda.org wrote:
> From: Suniel Mahesh
>
> __be32_to_cpu() accepts argument of type __be32. This patch changes
> type of the buffer in ALLOC_CACHE_ALIGN_BUFFER macro to __be32, which
> is then passed to __be32_to_cpu().
> This prevents sparse build warnings.
> d
On 10/20/2017 08:41 PM, Fabio Estevam wrote:
> When CONFIG_DM_MMC=y, CONFIG_BLK should be selected, otherwise the
> SD/eMMC card cannot be used.
>
> Also, select CONFIG_DM_USB=y when CONFIG_USB=y to avoid build failure.
>
> Tested on mx6slevk, mx7dsabresd and mx6ullevk.
>
> Signed-off-by: Fabio
On Fri, Oct 20, 2017 at 6:51 AM, Jaehoon Chung wrote:
> On 10/20/2017 08:41 PM, Fabio Estevam wrote:
>> When CONFIG_DM_MMC=y, CONFIG_BLK should be selected, otherwise the
>> SD/eMMC card cannot be used.
>>
>> Also, select CONFIG_DM_USB=y when CONFIG_USB=y to avoid build failure.
>>
>> Tested on mx
Hi
Most featureful boards, such as the Cubietruck, have been broken since
the release 2017.09 (the two variants of the Olinuxino-Lime2 and the
cubietruck at least, possibly more since then).
This is due to a size increase of the binary that will trip us across
the size we've been using in our def
The U-Boot binary may trip over its actual allocated size in the storage.
In such a case, the environment will not be readable anymore (because
corrupted when the new image was flashed), and any attempt at using saveenv
to reconstruct the environment will result in a corrupted U-Boot binary.
Revie
We start to get to the limit of our main U-Boot binary size (with some
boards even crossing it). Enable its build using thumb2 to get some extra
room.
Suggested-by: Siarhei Siamashka
Signed-off-by: Maxime Ripard
---
arch/arm/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/K
On Fri, Oct 20, 2017 at 8:20 AM, Maxime Ripard
wrote:
> On Thu, Oct 19, 2017 at 05:40:20PM -0400, Rob Clark wrote:
>> On Thu, Oct 19, 2017 at 7:43 AM, Maxime Ripard
>> wrote:
>> > On Thu, Oct 19, 2017 at 10:12:36AM +0100, Peter Robinson wrote:
>> >> On Thu, Oct 19, 2017 at 10:06 AM, Peter Robinso
On Fri, Oct 20, 2017 at 01:27:36PM +0100, Peter Robinson wrote:
> On Fri, Oct 20, 2017 at 8:20 AM, Maxime Ripard
> wrote:
> > On Thu, Oct 19, 2017 at 05:40:20PM -0400, Rob Clark wrote:
> >> On Thu, Oct 19, 2017 at 7:43 AM, Maxime Ripard
> >> wrote:
> >> > On Thu, Oct 19, 2017 at 10:12:36AM +0100,
Hi Fabio,
On 19/10/2017 at 13:57, Fabio Estevam wrote:
>
> I would be interested to see if you can get an SD card high speed to
> work with mainline U-Boot on your board.
>
> On my tests I need to force it 25MHz operation to be able to use the SD card.
With mainline U-Boot on my board, normal-s
This commit provides support for LWN's IMX6Q based DISPLAY5 board.
Signed-off-by: Lukasz Majewski
---
arch/arm/dts/imx6q-display5.dts | 18 ++
arch/arm/mach-imx/mx6/Kconfig | 7 +
board/liebherr/display5/Kconfig | 18 ++
board/liebherr/display5/MAINTAINERS | 7 +
board/liebh
On Fri, Oct 20, 2017 at 02:36:27PM +0200, Maxime Ripard wrote:
> On Fri, Oct 20, 2017 at 01:27:36PM +0100, Peter Robinson wrote:
> > On Fri, Oct 20, 2017 at 8:20 AM, Maxime Ripard
> > wrote:
> > > On Thu, Oct 19, 2017 at 05:40:20PM -0400, Rob Clark wrote:
> > >> On Thu, Oct 19, 2017 at 7:43 AM, Ma
On Fri, Oct 20, 2017 at 1:36 PM, Maxime Ripard
wrote:
> On Fri, Oct 20, 2017 at 01:27:36PM +0100, Peter Robinson wrote:
>> On Fri, Oct 20, 2017 at 8:20 AM, Maxime Ripard
>> wrote:
>> > On Thu, Oct 19, 2017 at 05:40:20PM -0400, Rob Clark wrote:
>> >> On Thu, Oct 19, 2017 at 7:43 AM, Maxime Ripard
On Fri, 2017-10-20 at 18:16 +0800, Bao Xiaowei wrote:
> CAUTION: This email originated from outside of the organization. Do not click
> links or open attachments unless you recognize the sender and know the
> content is safe.
>
>
> For some special reset times for longer pcie devices, the pcie
Hello Fabio,
On 10/20/2017 01:41 PM, Fabio Estevam wrote:
> When CONFIG_DM_MMC=y, CONFIG_BLK should be selected, otherwise the
> SD/eMMC card cannot be used.
>
> Also, select CONFIG_DM_USB=y when CONFIG_USB=y to avoid build failure.
>
> Tested on mx6slevk, mx7dsabresd and mx6ullevk.
>
> Signed-
On 10/18/2017 06:39 PM, Felix Brack wrote:
> This patch extends pmic_bind_children prefix matching. In addition to
> the node name the property regulator-name is used while trying to match
> prefixes. This allows assigning different drivers to regulator nodes
> named regulator@1 and regulator@10 fo
On 10/19/2017 11:45 PM, patrice.chot...@st.com wrote:
> From: Patrice Chotard
>
> Convert this driver to driver model.
> This driver is also used by VEXPRESS platforms which doesn't
> use driver model.
>
> Tested on STM32F746 and STM32F769 platforms.
>
> Signed-off-by: Christophe Priouzeau
> S
On 10/19/2017 11:46 PM, patrice.chot...@st.com wrote:
> From: Patrice Chotard
>
> Allow to get "bus-width" property from device tree
>
> Signed-off-by: Patrice Chotard
> ---
> drivers/mmc/arm_pl180_mmci.c | 17 +
> 1 file changed, 17 insertions(+)
>
> diff --git a/drivers/mmc/
When CONFIG_DM_MMC=y, CONFIG_BLK should be selected, otherwise the
SD/eMMC card cannot be used.
Also, select CONFIG_DM_USB=y when CONFIG_USB=y to avoid build failure.
Tested on mx6slevk, mx7dsabresd and mx6ullevk.
Signed-off-by: Fabio Estevam
Reviewed-by: Jaehoon Chung
Tested-by: Adam Ford
Te
On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> Adding some details about size in bytes to each section.
>
> Signed-off-by: Tien Fong Chee
> ---
> arch/arm/mach-socfpga/include/mach/boot0.h | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
Rev
On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> Enhance preloader header with both additional program length and program
> entry offset attributes, which offset is relative to the start of program
> header.
>
> Signed-off-by: Tien Fong Chee
> ---
> arch/arm
On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> Clock frequency info is required in U-boot.
We know this patch is for U-Boot, don't need to state it in the commit
message. Also, it's "U-Boot", not "U-boot".
>
> Signed-off-by: Tien Fong Chee
> ---
> arch/a
On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> SoC FPGA info is required in both SPL and U-boot.
s/SoC FPGA/SocFPGA to be consistent.
s/U-boot/U-Boot
>
> Signed-off-by: Tien Fong Chee
> ---
> arch/arm/mach-socfpga/board.c| 3 +++
> arch/arm/mach
On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> Enable function visible to other file, so it can be used by other
> functions from other file.
Huh? What function? What other file? Why?
Please bear in mind for future patches, when reading the commit message,
Please update your commit header.
On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> SPL configures DDR by programming peripheral raw binary file
> and calibrating DDR.
>
> Signed-off-by: Tien Fong Chee
> ---
> arch/arm/mach-socfpga/spl.c | 56
> ++
On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> Enable SPL successfully boot to U-boot.
s/U-boot/U-Boot
>
> Signed-off-by: Tien Fong Chee
> ---
> configs/socfpga_arria10_defconfig | 57
> +--
> 1 file changed, 49 inser
With the latest content of u-boot-mmc/master, 41dc35a149b3 "drivers:
mmc: Avoid memory leak in case of failure", all Tegra boards (perhaps
others too; my system only tests Tegra) fail to build with the following
error:
drivers/built-in.o: In function `mmc_select_mode_and_width':
/var/lib/jenk
On Fri, Oct 20, 2017 at 08:54:43AM -0400, Tom Rini wrote:
> > > >> > If it's a false one, then I guess Red Hat doesn't have any kind of
> > > >> > custom defconfigs for Fedora or RHEL for the kernel?
> > > >>
> > > >> kernel is part of the distro, "firmware" (ie. u-boot or whatever
> > > >> impleme
On Fri, Oct 20, 2017 at 06:39:18PM +0200, Maxime Ripard wrote:
> On Fri, Oct 20, 2017 at 08:54:43AM -0400, Tom Rini wrote:
> > > > >> > If it's a false one, then I guess Red Hat doesn't have any kind of
> > > > >> > custom defconfigs for Fedora or RHEL for the kernel?
> > > > >>
> > > > >> kernel i
Hi Benoît,
On Fri, Oct 20, 2017 at 10:40 AM, Benoît Thébaudeau wrote:
> With mainline U-Boot on my board, normal-speed SD cards work fine, but not HS
> ones. Both types of cards work fine at 48 MHz with my custom and older U-Boot.
Ok, great! What is the version of your old U-Boot?
>
> The main
On Fri, Oct 20, 2017 at 5:39 PM, Maxime Ripard
wrote:
> On Fri, Oct 20, 2017 at 08:54:43AM -0400, Tom Rini wrote:
>> > > >> > If it's a false one, then I guess Red Hat doesn't have any kind of
>> > > >> > custom defconfigs for Fedora or RHEL for the kernel?
>> > > >>
>> > > >> kernel is part of th
On Mon, Oct 16, 2017 at 02:08:26PM -0500, Adam Ford wrote:
> This converts the following to Kconfig:
>CONFIG_NAND_OMAP_GPMC
>CONFIG_NAND_OMAP_GPMC_PREFETCH
>CONFIG_NAND_OMAP_ELM
>CONFIG_SPL_NAND_AM33XX_BCH
>CONFIG_SPL_NAND_SIMPLE (ARCH_OMAP2PLUS only)
>
> Signed-off-by: Adam F
This option provides better performance and should really always be
enabled. Make this be default y.
Signed-off-by: Tom Rini
---
drivers/mtd/nand/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 794410a152fe..ca9819344ecc 1006
El jue, 19-10-2017 a las 15:24 +0200, Maxime Ripard escribió:
> On Thu, Oct 19, 2017 at 02:03:55PM +0100, Andre Przywara wrote:
> > Hi,
> >
> > On 19/10/17 09:26, Maxime Ripard wrote:
> > > Hi,
> > >
> > > Most featureful boards, such as the Cubietruck, have been broken
> > > since
> > > the rele
El jue, 19-10-2017 a las 16:58 +0200, Maxime Ripard escribió:
> On Thu, Oct 19, 2017 at 03:42:11PM +0100, Andre Przywara wrote:
> > Hi,
> >
> > On 19/10/17 14:24, Maxime Ripard wrote:
> > > On Thu, Oct 19, 2017 at 02:03:55PM +0100, Andre Przywara wrote:
> > > > Hi,
> > > >
> > > > On 19/10/17 09:
On Mon, Oct 16, 2017 at 03:50:47PM -0500, Adam Ford wrote:
> This converts the following to Kconfig:
>CONFIG_SMC911X
>CONFIG_SMC911X_BASE
>CONFIG_SMC911X_32_BIT
>
> There are a variety of boards that need some cleanup in their
> respective include/configs file, but here is a foundatio
53 matches
Mail list logo
