On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee <tien.fong.c...@intel.com>
> 
> SoC FPGA info is required in both SPL and U-boot.

s/SoC FPGA/SocFPGA to be consistent.

s/U-boot/U-Boot

> 
> Signed-off-by: Tien Fong Chee <tien.fong.c...@intel.com>
> ---
>  arch/arm/mach-socfpga/board.c        | 3 +++
>  arch/arm/mach-socfpga/misc_arria10.c | 5 -----
>  arch/arm/mach-socfpga/spl.c          | 6 ++++++
>  3 files changed, 9 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach-socfpga/board.c
> index 9a96f52..7beb347 100644
> --- a/arch/arm/mach-socfpga/board.c
> +++ b/arch/arm/mach-socfpga/board.c
> @@ -32,6 +32,9 @@ int board_init(void)
>  #if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
>       /* configuring the clock based on handoff */
>       cm_basic_init(gd->fdt_blob);
> +
> +     /* Add device descriptor to FPGA device table */
> +     socfpga_fpga_add();
>  #endif
>  
>       return 0;
> diff --git a/arch/arm/mach-socfpga/misc_arria10.c 
> b/arch/arm/mach-socfpga/misc_arria10.c
> index 9d751f6..8760ac9 100644
> --- a/arch/arm/mach-socfpga/misc_arria10.c
> +++ b/arch/arm/mach-socfpga/misc_arria10.c
> @@ -94,11 +94,6 @@ int arch_early_init_r(void)
>       /* assert reset to all except L4WD0 and L4TIMER0 */
>       socfpga_per_reset_all();
>  
> -     /* configuring the clock based on handoff */
> -     /* TODO: Add call to cm_basic_init() */
> -
> -     /* Add device descriptor to FPGA device table */
> -     socfpga_fpga_add();

Why remove it from here?

>       return 0;
>  }
>  #else
> diff --git a/arch/arm/mach-socfpga/spl.c b/arch/arm/mach-socfpga/spl.c
> index 71bae82..aba116d 100644
> --- a/arch/arm/mach-socfpga/spl.c
> +++ b/arch/arm/mach-socfpga/spl.c
> @@ -15,6 +15,7 @@
>  #include <asm/arch/system_manager.h>
>  #include <asm/arch/freeze_controller.h>
>  #include <asm/arch/clock_manager.h>
> +#include <asm/arch/misc.h>
>  #include <asm/arch/scan_manager.h>
>  #include <asm/arch/sdram.h>
>  #include <asm/arch/scu.h>
> @@ -208,6 +209,11 @@ void spl_board_init(void)
>  
>       /* enable console uart printing */
>       preloader_console_init();
> +
> +     WATCHDOG_RESET();
> +
> +     /* Add device descriptor to FPGA device table */
> +     socfpga_fpga_add();

And add here?

Dinh
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to