the board enter download firmware mode, some boards use a
adc to detect the key status, and some use a gpio.
This series try to implement all the download mode related
functions on the base of Dr. Philipp's patch[0].
[0]https://lists.denx.de/pipermail/u-boot/2017-October/309060.html
Changes in v
setup_boot_mode function use the same logic but different
mode register address across all the rockchip platforms,
so it's better to make this function reused across all the
platforms, and let the mode register address setting from
the config file.
Signed-off-by: Andy Yan
Reviewed-by: Simon Glass
Rockchip bootrom will enter download mode if it returns from
spl/tpl with a non-zero value and couldn't find a valid image
in the backup partition.
This patch provide a method to instruct the system to back to
bootrom download mode by checking the BROM_DOWNLOAD_FLAG register.
As the bootrom downloa
Enter download mode if the download key pressed.
Signed-off-by: Andy Yan
---
Changes in v3: None
Changes in v2:
- more document
- move adc key detect as the default
arch/arm/mach-rockchip/boot_mode.c | 43 ++
1 file changed, 43 insertions(+)
diff --git a/a
(Adding Albert as maintainer again)
On 11.10.2017 00:50, Rob Clark wrote:
On Tue, Oct 10, 2017 at 6:28 PM, Heinrich Schuchardt wrote:
On 10/10/2017 02:23 PM, Rob Clark wrote:
These devices have small image size limits, so exclude EFI_LOADER to
help avoid exceeding limits.
Signed-off-by: Rob
On 11.10.17 09:07, Stefan Roese wrote:
> (Adding Albert as maintainer again)
>
> On 11.10.2017 00:50, Rob Clark wrote:
>> On Tue, Oct 10, 2017 at 6:28 PM, Heinrich Schuchardt
>> wrote:
>>> On 10/10/2017 02:23 PM, Rob Clark wrote:
These devices have small image size limits, so exclude
Hi Fabio
Fabio Estevam wrote:
> From: Sven-Ola Tuecke
>
> However, at least on some i.MX6 custom boards, when calling
By "some", I assume that not all i.MX6 systems are showing this
behaviour. Does anyone have an idea which systems are affected and which
are not?
> assert_core_reset() as part
Hi,
On Tuesday 10 October 2017 07:19 PM, Marek Vasut wrote:
> On 10/10/2017 12:45 PM, Faiz Abbas wrote:
>> Hi Marek,
>>
>> On Tuesday 10 October 2017 01:30 PM, Marek Vasut wrote:
>>> On 10/10/2017 07:48 AM, Kishon Vijay Abraham I wrote:
Hi,
>>>
>>> Hi,
>>>
>>> [...]
>>>
>> -
Hi,
On Wednesday 11 October 2017 01:53 PM, Faiz Abbas wrote:
> Hi,
>
> On Tuesday 10 October 2017 07:19 PM, Marek Vasut wrote:
>> On 10/10/2017 12:45 PM, Faiz Abbas wrote:
>>> Hi Marek,
>>>
>>> On Tuesday 10 October 2017 01:30 PM, Marek Vasut wrote:
On 10/10/2017 07:48 AM, Kishon Vijay Abrah
Hello Tom,
please pull from u-boot-i2c master
The following changes since commit 45c9d96ae40b0c4292eb67d687f0bf698a0ce72b:
configs: Re-sync CONFIG_CMD_IMLS with moveconfig (2017-10-10 17:52:07 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you
On 10/05/2017 08:07 AM, chin.liang@intel.com wrote:
> From: Chin Liang See
>
> Restructure the SPL so each devices such as CV, A10 and S10
> will have their own dedicated SPL file. SPL file determine
> the HW initialization flow which is device specific
>
> Signed-off-by: Chin Liang See
>
On 10/05/2017 08:07 AM, chin.liang@intel.com wrote:
> From: Chin Liang See
>
> Add SPL driver support for Stratix SoC
>
> Signed-off-by: Chin Liang See
> ---
> arch/arm/mach-socfpga/Makefile| 4 +
> arch/arm/mach-socfpga/include/mach/firewall_s10.h | 84 +++
On 10/05/2017 08:07 AM, chin.liang@intel.com wrote:
> From: Chin Liang See
>
> Add timer support for Stratix SoC
>
> Signed-off-by: Chin Liang See
> ---
> arch/arm/mach-socfpga/timer.c | 17 -
> 1 file changed, 16 insertions(+), 1 deletion(-)
>
Reviewed-by: Dinh Nguyen
On 10/05/2017 08:07 AM, chin.liang@intel.com wrote:
> From: Chin Liang See
>
> Add mailbox support for Stratix SoC
>
> Signed-off-by: Ley Foon Tan
> Signed-off-by: Chin Liang See
> ---
> arch/arm/mach-socfpga/Makefile | 1 +
> arch/arm/mach-socfpga/include/mach/mailb
Hi Tuomas,
On 2017/10/11 2:59, Tuomas Tynkkynen wrote:
Last user of this option went away in commit:
fdc7718999 ("board: usb_a9263: Update to support DT and DM")
It is okay for me.
Acked-by: Wenyou Yang
Signed-off-by: Tuomas Tynkkynen
---
drivers/spi/Makefile | 1 -
driv
On Tue, Oct 10, 2017 at 5:18 PM, Fabio Estevam wrote:
> Hi Jagan,
>
> On Mon, Oct 9, 2017 at 3:05 PM, Jagan Teki wrote:
>
>> I didn't dig much, but the i.MX6UL case has rebooting with DM_MMC for
>> both SPL and U-Boot proper.
>
> Looks like the same issue I saw with mx6q, which has been fixed by
On Tue, Sep 26, 2017 at 6:40 PM, Eugeniy Paltsev
wrote:
> Add option to set spi controller clock frequency via device tree
> using standard clock bindings.
> Old way of setting spi controller clock frequency (via implementation
> of 'cm_get_spi_controller_clk_hz' function in platform specific code
On Wed, Oct 11, 2017 at 08:53:25AM +0900, Nobuhiro Iwamatsu wrote:
> Hi, Tom.
>
> The following changes since commit 37a7908137a8c904f43c83f3e6c269cd51bf6126:
>
> ARM: dts: rmobile: Update DTS to match Linux 4.13 (2017-09-12 23:01:51
> +0200)
>
> are available in the git repository at:
>
>
Hi Jagan,
Thanks for respond, my comments are given inline.
On Wed, 2017-10-11 at 16:36 +0530, Jagan Teki wrote:
> On Tue, Sep 26, 2017 at 6:40 PM, Eugeniy Paltsev
> wrote:
> > Add option to set spi controller clock frequency via device tree
> > using standard clock bindings.
> > Old way of setti
Signed-off-by: Ashish Kumar
---
v2:
Reword commit msg
configs/ls1088aqds_qspi_defconfig | 1 +
configs/ls1088ardb_qspi_defconfig | 1 +
include/configs/ls1088aqds.h | 1 -
include/configs/ls1088ardb.h | 1 -
4 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/configs/ls1088a
On 10/11/2017 03:30 AM, Bin Meng wrote:
> On Wed, Oct 11, 2017 at 5:04 AM, Tom Rini wrote:
>> On Tue, Oct 10, 2017 at 11:27:39AM +0200, Marek Vasut wrote:
>>
>>> Hi,
>>>
>>> I am considering offloading xhci maintainership to Bin .
>>> Thoughts ?
>>
>> If Bin wants it, I have no objections.
>>
>
>
On Wed, Oct 11, 2017 at 03:17:24PM +0200, Marek Vasut wrote:
> On 10/11/2017 03:30 AM, Bin Meng wrote:
> > On Wed, Oct 11, 2017 at 5:04 AM, Tom Rini wrote:
> >> On Tue, Oct 10, 2017 at 11:27:39AM +0200, Marek Vasut wrote:
> >>
> >>> Hi,
> >>>
> >>> I am considering offloading xhci maintainership t
On Wednesday 11 October 2017 02:28 PM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Wednesday 11 October 2017 01:53 PM, Faiz Abbas wrote:
>> Hi,
>>
>> On Tuesday 10 October 2017 07:19 PM, Marek Vasut wrote:
>>> On 10/10/2017 12:45 PM, Faiz Abbas wrote:
Hi Marek,
On Tuesday 10 Octobe
Hi,
On Mon, Oct 9, 2017 at 4:09 PM, Simon Glass wrote:
> Hi,
>
> On 9 October 2017 at 06:55, Dr. Philipp Tomsich
> wrote:
>>
>>> On 9 Oct 2017, at 14:45, Mario Six wrote:
>>>
>>> (adding Philipp since he converted lots of drivers to livetree recently)
>>>
>>> On Mon, Oct 9, 2017 at 6:48 AM, Sim
From: Patrice Chotard
Remove useless local variable "s" and use directly
function's parameter "output"
Signed-off-by: Patrice Chotard
---
drivers/i2c/stm32f7_i2c.c | 10 ++
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c
From: Patrice Chotard
This series :
_ fixes data abort for stm32f7_i2c driver
_ removes useless local variable
Christophe Kerello (1):
i2c: stm32f7_i2c: fix data abort
Patrice Chotard (1):
i2c: stm32f7_i2c: fix usage of useless local variable
drivers/i2c/stm32f7_i2c.c | 17
From: Christophe Kerello
As "v" is a local variable in stm32_i2c_choose_solution()
"v" has to be copied into "s" to avoid data abort in
stm32_i2c_compute_timing().
Signed-off-by: Christophe Kerello
Reviewed-by: Patrick DELAUNAY
Signed-off-by: Patrice Chotard
---
drivers/i2c/stm32f7_i2c.c | 2
On 10.10.17 14:22, Rob Clark wrote:
> From: Leif Lindholm
>
> Not complete, but enough for Shell.efi and SCT.efi. We'll implement the
> rest as needed or once we have SCT running properly so there is a way to
> validate the interface against the conformance test suite.
>
> Initial skeleton wr
Since U-Boot 2017.09 it is no longer possible to boot a kernel from SD
card:
U-Boot 2017.11-rc1-00149-g38c8107-dirty (Oct 11 2017 - 09:55:22 -0300)
CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz
On Wed, Oct 11, 2017 at 11:23 AM, Fabio Estevam wrote:
> Since U-Boot 2017.09 it is no longer possible to boot a kernel from SD
> card:
>
> U-Boot 2017.11-rc1-00149-g38c8107-dirty (Oct 11 2017 - 09:55:22 -0300)
>
> CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz)
> CPU: Commercial te
On 10.10.17 14:22, Rob Clark wrote:
> From: Leif Lindholm
>
> Enough implementation of the following protocols to run Shell.efi and
> SCT.efi:
>
> EfiHiiConfigRoutingProtocolGuid
> EfiHiiDatabaseProtocol
> EfiHiiStringProtocol
>
> We'll fill in the rest once SCT is running properly so w
On 10.10.17 14:22, Rob Clark wrote:
> From: Leif Lindholm
>
> Not complete, but enough for Shell.efi and SCT.efi.
>
> Initial skeleton written by Leif, and then implementation by myself.
>
> Cc: Leif Lindholm
> Signed-off-by: Rob Clark
> ---
> include/efi_api.h | 41 ++
On 10.10.17 14:23, Rob Clark wrote:
> We need the _EX version for SCT.. and we need to wire up the
> corresponding objects in the systab properly, as well as dealing
> with the console_in object advertising multiple protocols.
>
> Signed-off-by: Rob Clark
Reviewed-by: Alexander Graf
Alex
___
On 10.10.17 14:23, Rob Clark wrote:
> Shell.efi uses this, and supporting color attributes makes things look
> nicer. Map the EFI fg/bg color attributes to ANSI escape sequences.
> Not all colors have a perfect match, but spec just says "Devices
> supporting a different number of text colors are
On 10.10.17 14:23, Rob Clark wrote:
> In some cases, it is quite useful to have (for example) EFI on screen
> but u-boot on serial port.
>
> This adds two new optional environment variables, "efiin" and "efiout",
> which can be used to set EFI console input/output independently of
> u-boot's inp
On 10.10.17 14:23, Rob Clark wrote:
> An event can be created with type==0, Shell.efi does this for an event
> that is set when Ctrl-C is typed. So our current approach of having a
> fixed set of timer slots, and determining which slots are unused by
> type==0 doesn't work so well. But we don't
On 10.10.17 14:23, Rob Clark wrote:
> From: Heinrich Schuchardt
>
> The watchdog is initialized with a 5 minute timeout period.
> It can be reset by SetWatchdogTimer.
> It is stopped by ExitBoottimeServices.
>
> Signed-off-by: Heinrich Schuchardt
This is missing an SoB line from Rob.
Review
On 10.10.17 14:23, Rob Clark wrote:
> This fixes an issue with OpenBSD's bootloader, and I think should also
> fix a similar issue with grub2 on legacy devices. In the legacy case
> we were creating disk objects for the partitions, but not also the
> parent device.
>
> Reported-by: Jonathan Gra
I saw a DT build issue report some time before [1]. I was able to
reproduce the bug, and figure out the root cause.
Since commit 6d427c6b1fa0 ("binman: Automatically include a U-Boot
.dtsi file"), invalid .*.cmd files are generated.
Since that commit, DTS files are put into sed and piped to CPP.
On 10.10.17 14:23, Rob Clark wrote:
> When we don't have a real device/image path, such as 'bootefi hello',
> construct a mem-mapped device-path.
>
> This fixes 'bootefi hello' after devicepath refactoring.
>
> Fixes: 95c5553ea2 ("efi_loader: refactor boot device and loaded_image
> handling")
This patch fixes some warnings when building boards that do not define
DM_I2C_COMPAT i.e. boards that entirely rely on the new i2c layer.
Signed-off-by: Felix Brack
---
drivers/mmc/omap_hsmmc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/omap_hsmmc.c b/dri
On Wed, Oct 11, 2017 at 4:33 AM, Dinh Nguyen wrote:
>
>
> On 10/05/2017 08:07 AM, chin.liang@intel.com wrote:
>> From: Chin Liang See
>>
>> Add mailbox support for Stratix SoC
>>
>> Signed-off-by: Ley Foon Tan
>> Signed-off-by: Chin Liang See
>> ---
>> arch/arm/mach-socfpga/Makefile
On Wed, Oct 11, 2017 at 11:27 AM, Otavio Salvador
wrote:
> I understand your goal but I think we ought to focus on fixing the
> root cause of it instead of moving things back out of DM. I even think
> we could postpone a little the release until a fix is made but revert
> out from DM seems wrong.
Hi Jagan,
On Wed, Oct 11, 2017 at 7:17 AM, Jagan Teki wrote:
> Still looping for i.MX6UL.
Can you test it again removing CONFIG_DM_MMC support?
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Fabio,
On Wed, Oct 11, 2017 at 9:19 PM, Fabio Estevam wrote:
> Hi Jagan,
>
> On Wed, Oct 11, 2017 at 7:17 AM, Jagan Teki wrote:
>
>> Still looping for i.MX6UL.
>
> Can you test it again removing CONFIG_DM_MMC support?
I've observed here, u-boot is unable to relocate. So when I build
U-Boot w
On Wed, Oct 11, 2017 at 1:06 PM, Jagan Teki wrote:
> I've observed here, u-boot is unable to relocate. So when I build
> U-Boot with removing u-boot,dm-spl from dts it works fine, but idea
> here I need to use SPL_OF_CONTROL and it is not related to DM_MMC I
> suppose.
Ok, a different bug then.
+ Stefano
On Wed, Oct 11, 2017 at 9:39 PM, Fabio Estevam wrote:
> On Wed, Oct 11, 2017 at 1:06 PM, Jagan Teki wrote:
>
>> I've observed here, u-boot is unable to relocate. So when I build
>> U-Boot with removing u-boot,dm-spl from dts it works fine, but idea
>> here I need to use SPL_OF_CONTROL
For the DM TPS65910 driver I'm working on, querying the MPU voltage
should return a value in uV. This value can then be used by the
regulator's standard function set_value to set the MPU voltage.
Signed-off-by: Felix Brack
---
arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 +
arch/arm/mach-o
On Wed, Oct 11, 2017 at 01:09:04PM -0300, Fabio Estevam wrote:
> On Wed, Oct 11, 2017 at 1:06 PM, Jagan Teki wrote:
>
> > I've observed here, u-boot is unable to relocate. So when I build
> > U-Boot with removing u-boot,dm-spl from dts it works fine, but idea
> > here I need to use SPL_OF_CONTROL
As the code currently stands, we first check that the length of the
given command line, along with ip_str/mac_str along with an additional 1
for the NULL termination will fit within the buffer we have, and if not,
we return an error. The way this code was originally written however
left Coverity "
On Wed, Oct 11, 2017 at 10:36 AM, Alexander Graf wrote:
>
>
> On 10.10.17 14:22, Rob Clark wrote:
>> From: Leif Lindholm
>>
>> Not complete, but enough for Shell.efi and SCT.efi.
>>
>> Initial skeleton written by Leif, and then implementation by myself.
>>
>> Cc: Leif Lindholm
>> Signed-off-by:
Change-Id: I1bdfffe782a61a4c688f1bb56e85448024cd497b
Signed-off-by: Eric Nelson
---
configs/mx7dsabresd_defconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/configs/mx7dsabresd_defconfig b/configs/mx7dsabresd_defconfig
index 795c4f2..144fb50 100644
--- a/configs/mx7dsabresd_defconfig
+++
On Wed, Oct 11, 2017 at 10:07 AM, Alexander Graf wrote:
>
>
> On 10.10.17 14:22, Rob Clark wrote:
>> From: Leif Lindholm
>>
>> Not complete, but enough for Shell.efi and SCT.efi. We'll implement the
>> rest as needed or once we have SCT running properly so there is a way to
>> validate the inter
On Thu, Oct 12, 2017 at 1:59 AM, Eric Nelson wrote:
> Change-Id: I1bdfffe782a61a4c688f1bb56e85448024cd497b
> Signed-off-by: Eric Nelson
Reviewed-by: Jagan Teki
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
___
On Thu, Oct 5, 2017 at 8:07 AM, wrote:
> From: Chin Liang See
>
> Add DDR support for Stratix SoC
>
> Signed-off-by: Chin Liang See
> ---
> arch/arm/mach-socfpga/include/mach/sdram_s10.h | 333 +
> drivers/ddr/altera/Makefile| 1 +
> drivers/ddr/altera
On 11.10.17 22:30, Rob Clark wrote:
> On Wed, Oct 11, 2017 at 10:36 AM, Alexander Graf wrote:
>>
>>
>> On 10.10.17 14:22, Rob Clark wrote:
>>> From: Leif Lindholm
>>>
>>> Not complete, but enough for Shell.efi and SCT.efi.
>>>
>>> Initial skeleton written by Leif, and then implementation by mys
Hi Eric,
That was the fix I was waiting for, thanks!
On Wed, Oct 11, 2017 at 5:29 PM, Eric Nelson wrote:
Please add a commit log and explain that this fixes a regression.
> Change-Id: I1bdfffe782a61a4c688f1bb56e85448024cd497b
Please remove this line.
Also, when you send a v2, please do the s
On Wed, Oct 11, 2017 at 05:50:04PM -0300, Fabio Estevam wrote:
> Hi Eric,
>
> That was the fix I was waiting for, thanks!
>
> On Wed, Oct 11, 2017 at 5:29 PM, Eric Nelson wrote:
>
> Please add a commit log and explain that this fixes a regression.
>
> > Change-Id: I1bdfffe782a61a4c688f1bb56e85
On Thu, Oct 5, 2017 at 8:07 AM, wrote:
> From: Chin Liang See
>
> Add socdk board support for Stratix SoC
>
> Signed-off-by: Chin Liang See
> ---
> board/altera/stratix10-socdk/MAINTAINERS | 7 +++
> board/altera/stratix10-socdk/Makefile| 7 +++
> board/altera/stratix10-socdk/socfp
Hi Fabio,
On 10/11/2017 01:50 PM, Fabio Estevam wrote:
Hi Eric,
That was the fix I was waiting for, thanks!
Glad to hear it.
On Wed, Oct 11, 2017 at 5:29 PM, Eric Nelson wrote:
Please add a commit log and explain that this fixes a regression.
Okay. If you insist ;)
Change-Id: I1bdff
On Thu, Oct 5, 2017 at 8:07 AM, wrote:
> From: Chin Liang See
>
> Add build support for Stratix SoC
>
> Signed-off-by: Chin Liang See
> ---
> arch/arm/Kconfig | 8 +-
> arch/arm/mach-socfpga/Kconfig | 13 ++
> configs/socfpga_stratix10_defconfig |
Hi Tom,
On 10/11/2017 01:51 PM, Tom Rini wrote:
On Wed, Oct 11, 2017 at 05:50:04PM -0300, Fabio Estevam wrote:
Hi Eric,
That was the fix I was waiting for, thanks!
On Wed, Oct 11, 2017 at 5:29 PM, Eric Nelson wrote:
Please add a commit log and explain that this fixes a regression.
Change-
Commit 6fbbcfd introduced device-tree support for MMC devices on
the mx7sabresd boards and didn't include BLK, which requires BLK.
Commit 8ae5bb3 did the same for secure boot.
Fix both by allowing blk-uclass (BLK) support.
Tested-by: Fabio Estevam
Signed-off-by: Eric Nelson
---
V2 includes the
On Wed, Oct 11, 2017 at 02:45:25PM -0700, Eric Nelson wrote:
> Commit 6fbbcfd introduced device-tree support for MMC devices on
> the mx7sabresd boards and didn't include BLK, which requires BLK.
>
> Commit 8ae5bb3 did the same for secure boot.
>
> Fix both by allowing blk-uclass (BLK) support.
On Wed, Oct 11, 2017 at 6:49 PM, Tom Rini wrote:
> It sounds like BLK shouldn't be default y if DM_MMC but rather selected
> by DM_MMC. Yes?
What about this?
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -13,6 +13,7 @@ config MMC
config DM_MMC
bool "Enable MMC controllers usi
On Wed, Oct 11, 2017 at 06:53:13PM -0300, Fabio Estevam wrote:
> On Wed, Oct 11, 2017 at 6:49 PM, Tom Rini wrote:
>
> > It sounds like BLK shouldn't be default y if DM_MMC but rather selected
> > by DM_MMC. Yes?
>
> What about this?
>
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @
On Wed, Oct 11, 2017 at 10:30 AM, Alexander Graf wrote:
>
>
> On 10.10.17 14:22, Rob Clark wrote:
>> From: Leif Lindholm
>>
>> Enough implementation of the following protocols to run Shell.efi and
>> SCT.efi:
>>
>> EfiHiiConfigRoutingProtocolGuid
>> EfiHiiDatabaseProtocol
>> EfiHiiStringPro
On Wed, Oct 11, 2017 at 6:55 PM, Tom Rini wrote:
> Yes, I think that's it, along with removing the default y if DM_MMC from
> the BLK entry. Thanks!
Ok, if I do as suggested:
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -1,7 +1,6 @@
config BLK
bool "Support block devices
On Wed, Oct 11, 2017 at 10:45 AM, Alexander Graf wrote:
>
>
> On 10.10.17 14:23, Rob Clark wrote:
>> In some cases, it is quite useful to have (for example) EFI on screen
>> but u-boot on serial port.
>>
>> This adds two new optional environment variables, "efiin" and "efiout",
>> which can be use
On Wed, Oct 11, 2017 at 10:49 AM, Alexander Graf wrote:
>
>
> On 10.10.17 14:23, Rob Clark wrote:
>> An event can be created with type==0, Shell.efi does this for an event
>> that is set when Ctrl-C is typed. So our current approach of having a
>> fixed set of timer slots, and determining which s
On Wed, Oct 11, 2017 at 10:59 AM, Alexander Graf wrote:
>
>
> On 10.10.17 14:23, Rob Clark wrote:
>> When we don't have a real device/image path, such as 'bootefi hello',
>> construct a mem-mapped device-path.
>>
>> This fixes 'bootefi hello' after devicepath refactoring.
>>
>> Fixes: 95c5553ea2 (
On Wed, Oct 11, 2017 at 07:07:04PM -0300, Fabio Estevam wrote:
> On Wed, Oct 11, 2017 at 6:55 PM, Tom Rini wrote:
>
> > Yes, I think that's it, along with removing the default y if DM_MMC from
> > the BLK entry. Thanks!
>
> Ok, if I do as suggested:
>
> --- a/drivers/block/Kconfig
> +++ b/driv
On Wed, Oct 11, 2017 at 7:17 PM, Tom Rini wrote:
> Hmmm. So, if you have DM and DM_MMC, you need BLK. If you have DM and
> BLK and USB, you also need DM_USB (and vice-versa, if you have DM and DM_USB
> and
> not DM_MMC, things will break too, on another platform I bet). So,
> DM_USB should al
On Wed, Oct 11, 2017 at 12:13 PM, Suneel Garapati
wrote:
> Hi Rob,
>
> I am enlisted on u-boot mailing list and currently trying to use efi
> loader to launch ubuntu distro.
>
> Appreciate your great efforts on this, would definitely help a lot.
>
> I tried to boot grub from u-boot using efi_loade
Hi Felix,
On 9 October 2017 at 03:04, Felix Brack wrote:
>
> This patch extends pmic_bind_children prefix matching. In addition to
> the node name the property regulator-name is used while trying to match
> prefixes. This allows assigning different drivers to regulator nodes
> named regulator@1 a
On Mon, Oct 9, 2017 at 6:04 PM, Felix Brack wrote:
> This patch extends pmic_bind_children prefix matching. In addition to
> the node name the property regulator-name is used while trying to match
> prefixes. This allows assigning different drivers to regulator nodes
> named regulator@1 and regula
Signed-off-by: Bin Meng
---
tools/env/.gitignore | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/env/.gitignore b/tools/env/.gitignore
index 804abac..8d28b2b 100644
--- a/tools/env/.gitignore
+++ b/tools/env/.gitignore
@@ -1,2 +1,3 @@
+embedded.c
fw_printenv
fw_printenv_unstripped
--
All regulators are hooked to EN_Pin at reset so that EN Pin controls
their state. Hook the LDO1 regulator to EN pin which at reset is not
hooked. This applies only to LP8733.
Signed-off-by: Keerthy
---
board/ti/dra7xx/evm.c | 7 +++
1 file changed, 7 insertions(+)
diff --git a/board/ti/dra7
Hi Ran,
On Wed, Oct 11, 2017 at 1:30 PM, Ran Wang wrote:
> Use Kconfig to select QE-HDLC and USB pin-mux.
>
> Signed-off-by: Ran Wang
> ---
> Change in v3:
> New patch file.
>
> arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 7 +++
> include/configs/ls1012afrdm.h | 4
>
Hi Ran,
On Wed, Oct 11, 2017 at 1:30 PM, Ran Wang wrote:
> use Kconfig to select xhci accordingly.
>
> Signed-off-by: Ran Wang
> ---
> Change in v3:
> New patch file.
>
> drivers/usb/host/Kconfig | 6 ++
> include/configs/ls1012afrdm.h | 1 -
> include/configs/ls1012aqds.h | 1
Hi Ran,
On Wed, Oct 11, 2017 at 1:30 PM, Ran Wang wrote:
> Because COMFIG_DM_USB have been enabled and will not use it anymore.
nits: has been enabled
>
> Signed-off-by: Ran Wang
> ---
> Change in v3:
> New patch file.
>
> include/configs/ls1012afrdm.h | 5 -
> include/configs/ls1
On Wed, Oct 11, 2017 at 1:30 PM, Ran Wang wrote:
> Signed-off-by: Amrita Kumari
> Signed-off-by: Ashish Kumar
> Signed-off-by: Ran Wang
> ---
> Change in v3:
> - none
>
> Change in v2:
> Remove macro CONFIG_HAS_FSL_XHCI_USB and CONFIG_USB_XHCI_FSL
> and CONFIG_USB_MAX_CONTROLLER
On Wed, Oct 11, 2017 at 1:30 PM, Ran Wang wrote:
> Signed-off-by: Ashish Kumar
> Signed-off-by: Amrita Kumari
> Signed-off-by: Ran Wang
> ---
> Change in v3:
> 1.Move HAS_FSL_XHCI_USB and USB_XHCI_FSL define to other patch file.
>
> Change in v2:
> 1.Adjust USB nodes position in
On Sat, Oct 7, 2017 at 5:44 PM, Stefan Roese wrote:
> On 07.10.2017 11:43, Bin Meng wrote:
>>
>> Adjust VGA rom address to 0xfffb so that u-boot.rom image
>> can be built again.
>>
>> Signed-off-by: Bin Meng
>
>
> Reviewed-by: Stefan Roese
applied to u-boot-x86, thanks!
From: Yuantian Tang
On ls1012a soc, core clock source frequency is 100Mhz.
Generic timer frequency is derived from core clock source divided
by 4, which is 25Mhz. So assign timer frequency to 25Mhz here.
Signed-off-by: Tang Yuantian
---
v2:
- refine the commit message
include/configs/ls10
On 10/11/2017 10:32 PM, Rob Clark wrote:
On Wed, Oct 11, 2017 at 10:07 AM, Alexander Graf wrote:
On 10.10.17 14:22, Rob Clark wrote:
From: Leif Lindholm
Not complete, but enough for Shell.efi and SCT.efi. We'll implement the
rest as needed or once we have SCT running properly so there i
86 matches
Mail list logo
