From: Patrice Chotard
Update the CONFIG_EXTRA_ENV_SETTINGS, BOOT_TARGET_DEVICES and CONFIG_BOOTARGS
Fix SDRAM size
This series depends on series "[PATCH v3 00/13] STiH410-B2260: add reset,
usb and fastboot support" [1]. Hence this series must be applied when [1]
will be merged.
[1]
http://u-bo
From: Patrice Chotard
Signed-off-by: Patrice Chotard
---
include/configs/stih410-b2260.h | 31 +--
1 file changed, 25 insertions(+), 6 deletions(-)
diff --git a/include/configs/stih410-b2260.h b/include/configs/stih410-b2260.h
index 6c84e9b..7fcb327 100644
--- a/inc
From: Nicolas Le Bayon
32MB are reserved for Trusted Zone purpose
Signed-off-by: Nicolas Le Bayon
---
include/configs/stih410-b2260.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/stih410-b2260.h b/include/configs/stih410-b2260.h
index 7fcb327..ccbbf32 100
From: Lee Jones
Signed-off-by: Lee Jones
---
include/configs/stih410-b2260.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/stih410-b2260.h b/include/configs/stih410-b2260.h
index ccbbf32..b83bef5 100644
--- a/include/configs/stih410-b2260.h
+++ b/include/configs/stih410-b2
Even though from software developer PoV not much has changed in v1.1 firmware
for axs103 board still there's an important modification introduced by
SNPS hardware team: slave cores kick-start procedure now differs and we need
to accommodate this change in U-Boot.
Alexey Brodkin (2):
axs103: Clea
* Rely on default pulse polarity value
* Don't mess with "multicore" value as it doesn't affect execution
In essence we now do a bare minimal stuff:
1) Select HS38x2_1 with CORE_SEL=1 bits
2) Select "manual" core start (via CREG) with START_MODE=0
3) Generate cpu_start pulse with START=1
Sig
In axs103 v1.1 procedure to kick-start slave cores has changed quite a bit
compared t previous implementation.
In particular:
* We used to have a generic START bit for all cores selected by CORE_SEL
mask. But now we don't touch CORE_SEL at all because we have a dedicated
START bit for each
Even though we expect only master core to execute U-Boot code
let's make sure even if for some reason slave cores attempt to
execute U-Boot in parallel with master they get halted very early.
If platform wants it may kick-start slave cores before passing control
to say Linux kernel or any other ap
Tiny printf doesn't support %pM, so when CONFIG_USE_TINY_PRINTF is
enabled use %x to manually print MAC address.
Signed-off-by: Vignesh R
---
net/eth_common.c | 7 +++
1 file changed, 7 insertions(+)
diff --git a/net/eth_common.c b/net/eth_common.c
index 58fa29577102..cd67a21585c6 100644
--
On 03/30/2017 03:08 PM, Ley Foon Tan wrote:
> Add clock driver support for Arria 10.
>
> Signed-off-by: Tien Fong Chee
> Signed-off-by: Ley Foon Tan
>
> Conflicts:
> arch/arm/mach-socfpga/clock_manager.c
^ what's this "conflicts" about ?
--
Best regards,
Marek Vasut
__
On 03/30/2017 03:08 PM, Ley Foon Tan wrote:
> Convert Altera DDR SDRAM driver to use Kconfig method.
> Enable ALTERA_SDRAM by default if it is on Gen5 target.
> Arria 10 will have different driver.
>
> Signed-off-by: Tien Fong Chee
> Signed-off-by: Ley Foon Tan
> ---
> drivers/Kconfig
On 03/30/2017 03:08 PM, Ley Foon Tan wrote:
> Add SPL support for Arria 10.
>
> Signed-off-by: Tien Fong Chee
> Signed-off-by: Ley Foon Tan
> ---
> arch/arm/mach-socfpga/spl.c | 74
> ++---
> 1 file changed, 69 insertions(+), 5 deletions(-)
>
> diff --g
On 03/30/2017 03:22 AM, chee skywind wrote:
> On Wed, Mar 29, 2017 at 5:03 PM, Marek Vasut wrote:
>
>> On 03/29/2017 05:49 AM, tien.fong.c...@intel.com wrote:
>>> From: "Chee, Tien Fong"
>>>
>>> Commit ce62e57fc571 ("ARM: boot0 hook: remove macro, include whole
>>> header file") miss out cleanin
On 03/29/2017 05:49 AM, tien.fong.c...@intel.com wrote:
> From: "Chee, Tien Fong"
>
> Commit ce62e57fc571 ("ARM: boot0 hook: remove macro, include whole
> header file") miss out cleaning macro in this header file, and this
> has broken implementation of a boot header capability in socfpga
> SPL.
All archs put U-Boot at the bottom of the relocated region. Xtensa does
not, but perhaps not for any good reason. Adjust it to see if things
still work OK.
Signed-off-by: Simon Glass
---
common/board_f.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/common/board_f.c b/
CONFIG_ALT_LB_ADDR is really a detail of how this logbuffer is allocated
rather than whether to do it at all. So move the #ifdef into the function.
Signed-off-by: Simon Glass
---
common/board_f.c | 7 +--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/common/board_f.c b/commo
Move the ugly #ifdefs inside the reserve_video() function so we can
collect all this init into one place.
Signed-off-by: Simon Glass
---
common/board_f.c | 36 +---
1 file changed, 5 insertions(+), 31 deletions(-)
diff --git a/common/board_f.c b/common/board_f.c
This is never defined when building this file, so drop it.
Signed-off-by: Simon Glass
---
common/board_f.c | 8
1 file changed, 8 deletions(-)
diff --git a/common/board_f.c b/common/board_f.c
index 230a9baf9c..7751c6c7e0 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -106,10
We don't need this PPC-specific function in generic code. Move it to
the powerpc directory.
Signed-off-by: Simon Glass
---
arch/powerpc/lib/Makefile | 1 +
arch/powerpc/lib/setup.c | 32
common/board_f.c | 25 -
include/common.
These includes don't seem to be needed now. Drop them. Reserve the
mp.h header for PowerPC for now.
Signed-off-by: Simon Glass
---
common/board_f.c | 18 +++---
1 file changed, 3 insertions(+), 15 deletions(-)
diff --git a/common/board_f.c b/common/board_f.c
index bbcf6f4fe5..14f90
The arch-specific details of the cache being off are best handled inside
the reserve_mmu(). This cleans up the init sequence a little.
Signed-off-by: Simon Glass
---
common/board_f.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/common/board_f.c b/common/board_f.c
Drop headers which are not used or needed in this file. The compiler.h
header is included by common.h.
Signed-off-by: Simon Glass
---
common/board_f.c | 5 -
1 file changed, 5 deletions(-)
diff --git a/common/board_f.c b/common/board_f.c
index 0c0bdc44e3..5df00f33b1 100644
--- a/common/boa
This is to keep the header file order consistent.
Signed-off-by: Simon Glass
---
common/board_f.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/common/board_f.c b/common/board_f.c
index 5df00f33b1..925861124c 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -45,7 +4
This header file is used by two archs. It could be used by all of them
since it allows the cache to be on during relocation. Move it into a
generic file.
Signed-off-by: Simon Glass
---
arch/arc/include/asm/init_helpers.h | 12
arch/x86/lib/spl.c
This is an weak function present on all archs so we should have it in the
common header file. Remove it from arch-specific headers and add a
function comment.
Signed-off-by: Simon Glass
---
arch/arm/include/asm/u-boot-arm.h | 1 -
arch/x86/include/asm/u-boot-x86.h | 1 -
include/common.h
This header file is used by three archs. It could be used by all of them
since relocation is a common function. Move it into a generic file.
Signed-off-by: Simon Glass
---
arch/arc/include/asm/relocate.h| 16
arch/x86/include/asm/relocate.h| 17 -
arch/x
On 03/30/2017 11:47 PM, Santan Kumar wrote:
>> Since you are reorganizing NAND boot, can you comb through all Layerscape
>> NAND boot and make them consistent in the sense of location in RAM,
>> malloc space, etc.? Or even better, can you also take SD boot and make them
>> consistent? I would li
On Thu, Mar 30, 2017 at 6:58 PM, Stefan Roese wrote:
> This introduces two Kconfig options to enable board specific filenames
> for the Intel binary blobs to be used to generate the SPI flash image.
>
> Signed-off-by: Stefan Roese
> Cc: Bin Meng
> Cc: Simon Glass
> ---
> arch/x86/Kconfig | 16
On Thu, Mar 30, 2017 at 6:58 PM, Stefan Roese wrote:
> Since we now have the file names configurable via Kconfig for the flash
> descriptor and intel-me files, add these from Kconfig in the corresponding
> dts nodes.
>
> Signed-off-by: Stefan Roese
> Cc: Bin Meng
> Cc: Simon Glass
> ---
> arch
On Thu, Mar 30, 2017 at 6:58 PM, Stefan Roese wrote:
> Now that we have added file names from Kconfig in x86 u-boot.dtsi,
> update binman to avoid using hard-coded names.
>
> Signed-off-by: Stefan Roese
> Cc: Bin Meng
> Cc: Simon Glass
> ---
> tools/binman/etype/intel_descriptor.py | 3 ---
>
The LED interface for driver model is a little primitive. This series
expands it to match the legacy interface and adds a command to match.
Simon Glass (8):
sandbox: Add some test LEDs
dm: led: Rename struct led_uclass_plat
dm: led: Adjust the LED uclass
dm: led: Add support for getting t
Add some LEDs to the standard sandbox device tree.
Signed-off-by: Simon Glass
---
arch/sandbox/dts/sandbox.dts | 14 ++
cmd/{led.c => legacy_led.c} | 0
2 files changed, 14 insertions(+)
rename cmd/{led.c => legacy_led.c} (100%)
diff --git a/arch/sandbox/dts/sandbox.dts b/arch/s
At present this is very simple, supporting only on and off. We want to
also support toggling and blinking. As a first step, change the name of
the main method and use an enum to indicate the state.
Signed-off-by: Simon Glass
---
drivers/led/led-uclass.c | 6 +++---
drivers/led/led_gpio.c | 1
These structures are normally named with 'uc' instead of 'uclass'. Change
this one for consistency.
Signed-off-by: Simon Glass
---
drivers/led/led-uclass.c | 4 ++--
drivers/led/led_gpio.c | 4 ++--
include/led.h| 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --gi
The existing 'led' command does not support driver model. Rename it to
indicate that it is legacy code.
Signed-off-by: Simon Glass
---
cmd/Makefile | 2 +-
cmd/legacy_led.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/cmd/Makefile b/cmd/Makefile
index f13bb8c11e.
Add support for toggling an LED into the uclass interface. This can be
efficiently implemented by the driver.
Signed-off-by: Simon Glass
---
drivers/led/led_gpio.c | 7 +++
include/led.h | 1 +
test/dm/led.c | 25 +
3 files changed, 33 insertions(
It is useful to be able to read the LED as well as write it. Add this to
the uclass and update the GPIO driver.
Signed-off-by: Simon Glass
---
drivers/led/led-uclass.c | 10 ++
drivers/led/led_gpio.c | 15 +++
include/led.h| 16
test/dm/led.c
When driver model is used for LEDs, provide a command to allow LED access.
Signed-off-by: Simon Glass
---
cmd/Kconfig | 9
cmd/Makefile | 1 +
cmd/led.c| 133 +++
3 files changed, 143 insertions(+)
create mode 100644 cmd/led
Allow LEDs to be blinked if the driver supports it.
Signed-off-by: Simon Glass
---
drivers/led/led-uclass.c | 10 ++
include/led.h| 22 ++
test/dm/led.c| 22 ++
3 files changed, 54 insertions(+)
diff --git a/drivers/led/le
Hi Tom,
In this patch-set we add support of new AXS103 firmware as well
as troubleshoot unexpected execution by multiple cores simultaneously.
The following changes since commit 5cf618ee60a752d058a767372ca1ecb8d9c09b16:
Merge git://git.denx.de/u-boot-arc (2017-03-24 08:19:30 -0400)
are availa
On 03/29/2017 07:21 AM, Ruchika Gupta wrote:
> From: Vinitha Pillai-B57223
>
> - Add SD secure boot target for ls1046ardb.
> - Implement board specific spl_board_init() to setup CAAM stream ID and
> corresponding stream ID in SMMU.
> - Change the u-boot size defined by a macro for copying the ma
On 03/29/2017 07:21 AM, Ruchika Gupta wrote:
> From: Vinitha Pillai-B57223
>
> - Add SD secure boot target for ls1046ardb.
> - Implement board specific spl_board_init() to setup CAAM stream ID and
> corresponding stream ID in SMMU.
> - Change the u-boot size defined by a macro for copying the ma
The default value with distro_bootcmd is 2 seconds, which is
reasonably fast, and provides a consistent experience across platforms
supporting distro_bootcmd.
The current bootdelay value of 0 seconds is a bit challenging to
interrupt when desired.
Signed-off-by: Vagrant Cascadian
---
include/c
By default, u-boot itself outputs on the serial console at 115200, so
it may as well pass the same value to the booted operating system as
well.
Signed-off-by: Vagrant Cascadian
---
include/configs/mx6cuboxi.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/m
On Fri, Mar 31, 2017 at 5:48 PM, Vagrant Cascadian wrote:
> By default, u-boot itself outputs on the serial console at 115200, so
> it may as well pass the same value to the booted operating system as
> well.
>
> Signed-off-by: Vagrant Cascadian
Reviewed-by: Fabio Estevam
__
Using distro_bootcmd standardizes board behavior across many
platforms. This is particularly useful for distributions supporting
multiple boards without requiring custom configuration for each board.
There are a few changes needed to support distro_bootcmd, such as
fixing the default value for th
Using distro_bootcmd standardizes board behavior across many
platforms. This is particularly useful for distributions supporting
multiple boards without requiring custom configuration for each board.
Signed-off-by: Vagrant Cascadian
---
include/configs/odroid.h | 20 +---
1 file
The default value with distro_bootcmd is 2 seconds, which is
reasonably fast, and provides a consistent experience across platforms
supporting distro_bootcmd.
The current bootdelay value of 0 seconds is a bit challenging to
interrupt when desired.
Signed-off-by: Vagrant Cascadian
---
include/c
Signed-off-by: Vagrant Cascadian
---
include/configs/odroid.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/odroid.h b/include/configs/odroid.h
index 6cc7dd16a2..0fbda7dd76 100644
--- a/include/configs/odroid.h
+++ b/include/configs/odroid.h
@@ -45,7 +45,7 @
Signed-off-by: Vagrant Cascadian
---
include/configs/odroid.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/odroid.h b/include/configs/odroid.h
index 0fbda7dd76..abae044b66 100644
--- a/include/configs/odroid.h
+++ b/include/configs/odroid.h
@@ -54,7 +54,7 @
Some minor fixes version of the SPL FIT loading series and the respective
patches to enable this feature on 64-bit Allwinner SoCs.
There is a new patch (6/19) fixing the SPL_FIT dependencies, above all
selecting SPL_OF_LIBFDT when SPL_FIT is enabled. This reduces the number
of Kconfig symbols a boa
Currently the SPL FIT loader uses the spl_fit_select_fdt() function to
find the offset to the right DTB within the FIT image.
For this it iterates over all subnodes of the /configuration node in
the FIT tree and compares all "description" strings therein using a
board specific matching function.
If
At the moment we ignore any errors due to missing FIT properties,
instead go ahead and calculate our addresses with the -1 return value.
Fix this and bail out if any of the mandatory properties are missing.
Signed-off-by: Andre Przywara
---
common/spl/spl_fit.c | 15 +--
1 file chang
So far we were not using the FIT image format to its full potential:
The SPL FIT loader was just loading the first image from the /images
node plus one of the listed DTBs.
Now with the refactored loader code it's easy to load an arbitrary
number of images in addition to the two mentioned above.
As
SPL_FIT obviously requires libfdt in SPL, so let Kconfig express that by
selecting SPL_OF_LIBFDT.
Also make the actual options that users want (SPL signature and SPL FIT
loading) visible in the menu and let them select the SPL_FIT as a
requirement.
Also remove the now redundant SPL_OF_LIBFDT from t
Currently the SPL FIT loader always looks only for the first image in
the /images node a FIT tree, which it loads and later executes.
Generalize this by looking for a "firmware" property in the matched
configuration subnode, or, if that does not exist, for the first string
in the "loadables" prope
At the moment we load two images from a FIT image: the actual U-Boot
image and the .dtb file. Both times we have very similar code, that deals
with alignment requirements the media we load from imposes upon us.
Factor out this code into a new function, which we just call twice.
Signed-off-by: Andr
Not every SoC needs to set up the GIC interrupt controller, so link
think code only when the respective config option is set.
This shaves off some bytes from the SPL code size.
Signed-off-by: Andre Przywara
Reviewed-by: Simon Glass
---
arch/arm/lib/Makefile | 2 ++
1 file changed, 2 insertions(
From: Siarhei Siamashka
This patch updates the mksunxiboot tool to optionally add
the default device tree name string to the SPL header. This
information can be used by the firmware upgrade tools to
protect users from harming themselves by trying to upgrade
to an incompatible bootloader.
The pri
The SPL stack is usually located at the end of SRAM A1, where it grows
towards the end of the SPL.
For the really big AArch64 binaries the stack overwrites code pretty
soon, so move the SPL stack to the end of SRAM A2, which is unused at this
time.
Signed-off-by: Andre Przywara
Reviewed-by: Simon
mksunxiboot limits the size of the resulting SPL binaries to pretty
conservative values to cover all SoCs and all boot media (NAND).
It turns out that we have limit checks in place in the build process,
so mksunxiboot can be relaxed and allow packaging binaries up to the
actual 32KB the mask boot R
The generic ARMv8 assembly code contains routines for setting up
a CCN interconnect, though the Freescale SoCs are the only user.
Link this code only for Freescale targets, this saves some precious
bytes in the chronically tight SPL.
Signed-off-by: Andre Przywara
---
arch/arm/lib/Makefile | 2 +-
Some platforms require more complex U-Boot images than we can easily
generate via the mkimage command line, for instance to load additional
image files.
Introduce a CONFIG_SPL_FIT_SOURCE and CONFIG_SPL_FIT_GENERATOR symbol,
which can either hold an .its source file describing the image layout,
or,
For a board or platform to support FIT loading in the SPL, it has to
provide a board_fit_config_name_match() routine, which helps to select
one of possibly multiple DTBs contained in a FIT image.
Provide a simple function which chooses the DT name U-Boot was
configured with.
If the DT name is one o
The Allwinner SoCs with 64-bit cores use an ARM Trusted Firmware binary,
which needs to be loaded alongside U-Boot proper.
Set the respective Kconfig options to let them select this feature and
also automatically build the FIT image.
Signed-off-by: Andre Przywara
---
Kconfig
The sunxi SPL was holding the detected RAM size in some local variable
only, so it wasn't accessible for other functions.
Store the value in gd->ram_size instead, so it can be used later on.
Signed-off-by: Andre Przywara
Reviewed-by: Simon Glass
---
board/sunxi/board.c | 7 +++
1 file chang
Now that the Makefile can call a generator script to build a more
advanced FIT image, let's use this feature to address the needs of
Allwinner boards with 64-bit SoCs (A64 and H5).
The (DTB stripped) U-Boot binary and the ATF are static, but we allow
an arbitrary number of supported device trees to
When a board uses a FIT image to load U-Boot proper, it requires a list
of supported device trees to be supplied, from which it chooses the
right one at runtime.
Add this list for the Pine64 and OrangePi PC2 board.
Signed-off-by: Andre Przywara
---
configs/orangepi_pc2_defconfig | 1 +
configs/p
Now that we can store a DT name in the SPL header, use this string (if
available) when finding the right DT blob to load for U-Boot proper.
This allows a generic U-Boot (proper) image to be combined with a bunch
of supported DTs, with just the SPL (possibly only that string) to be
different.
Eventu
With the DRAM init code and the SPL's ability to load the ATF binary as
well, we can now officially get rid of the boot0 boot method, which
involed a closed-source proprietary blob to be used.
Rework the Pine64 README file to document how to build the firmware.
Signed-off-by: Andre Przywara
---
Hi Andre,
On 31 March 2017 at 16:31, Andre Przywara wrote:
> Some minor fixes version of the SPL FIT loading series and the respective
> patches to enable this feature on 64-bit Allwinner SoCs.
> There is a new patch (6/19) fixing the SPL_FIT dependencies, above all
> selecting SPL_OF_LIBFDT when
On 31/03/17 23:43, Simon Glass wrote:
> Hi Andre,
>
> On 31 March 2017 at 16:31, Andre Przywara wrote:
>> Some minor fixes version of the SPL FIT loading series and the respective
>> patches to enable this feature on 64-bit Allwinner SoCs.
>> There is a new patch (6/19) fixing the SPL_FIT depende
On ARM v7M, the processor will return to ARM mode when executing blx
instruction with bit 0 of the address == 0. Always set it to 1 to stay
in thumb mode.
Similar commit:
f3c10882f7dc8ec35993d5febe59aac01e6a
Author: Matt Porter
Date: Tue May 5 15:00:23 2015 -0400
common/cmd_boot: keep ARM v
On Tue, Mar 14, 2017 at 9:44 AM, Bin Meng wrote:
> On Mon, Mar 6, 2017 at 7:51 PM, Andy Shevchenko
> wrote:
>> There is option which is not used:
>> CONFIG_ZBOOT_32
>>
>> Remove it from default x86 config and from whitelist.
>>
>> Signed-off-by: Andy Shevchenko
>> ---
>> include/configs
Hi Stefan, Simon,
On Wed, Feb 22, 2017 at 3:07 PM, Stefan Roese wrote:
> Hi Simon,
>
> On 22.02.2017 04:59, Simon Glass wrote:
>
>
>
> What if the board mounts a flash with a different SPI flash command
> set? Will this work?
Frankly, I can't tell for sure but its ver
On Fri, Mar 17, 2017 at 11:26 AM, Simon Glass wrote:
> On 16 March 2017 at 08:26, Bin Meng wrote:
>> At present there are only 8-bit and 32-bit read/write routines in
>> the rtc uclass driver. This adds the 16-bit support.
>>
>> Signed-off-by: Bin Meng
>> ---
>>
>> drivers/rtc/rtc-uclass.c | 30
Hi Tom,
On 6 February 2017 at 08:32, Simon Glass wrote:
>
> Hi Tom,
>
> On 23 January 2017 at 10:22, Tom Rini wrote:
> > On Fri, Jan 20, 2017 at 07:07:35AM -0700, Simon Glass wrote:
> >
> >> Raspberry Pi uses a DWC2 USB controller and a SMSC USB Ethernet adaptor.
> >> Driver model support for th
Hi,
On 20 March 2017 at 14:48, Vikas Manocha wrote:
>
> This patch adds gpio driver supporting driver model for stm32f7 gpio.
>
> Signed-off-by: Vikas Manocha
> cc: Christophe KERELLO
> ---
> drivers/gpio/Kconfig| 9 +++
> drivers/gpio/Makefile | 1 +
> drivers/gpio/stm32f7_g
On 20 March 2017 at 14:48, Vikas Manocha wrote:
> With this gpio driver supporting DM, there is no need to enable clocks
> for different gpios (for pin muxing) in the board specific code.
>
> Need to increase the allocatable area required before relocation from 0x400 to
> 0xC00 becuase of 10 new g
Hi Heiko,
On 21 March 2017 at 17:30, Heiko Stuebner wrote:
> Most Rockchip socs have the ability to either map the bootrom or a sram
> area to the starting address of the cpu by flipping a bit in the GRF.
>
> Newer socs leave this untouched and mapped to the bootrom but the legacy
> loaders on rk
Hi Patrice,
On 22 March 2017 at 03:54, wrote:
> From: Patrice Chotard
>
> This patch adds the ST glue logic to manage the DWC3 HC
> on STiH407 SoC family. It configures the internal glue
> logic and syscfg registers.
>
> Part of this code been extracted from kernel.org driver
> (drivers/usb/dwc
Hi Jernej,
On 20 March 2017 at 16:01, Jernej Skrabec wrote:
> This series implements support for HDMI output. This is done using
> DM video framework and sharing the HDMI controller code with RK3288.
>
> Patch 1 splits out RK3288 HDMI code in a way that it is appropriate
> for sharing with Allwin
On 22 March 2017 at 03:54, wrote:
> From: Patrice Chotard
>
> Add support for on-chip ohci controller available
> on STMicrolectronics SoCs.
> Ohci support will be then available on both type A
> USB 2.0 connectors.
>
> Signed-off-by: Patrice Chotard
> ---
>
> v2: _ put board specific defin
Hi Patrice,
On 22 March 2017 at 03:54, wrote:
> From: Patrice Chotard
>
> Add support for on-chip ehci controller available
> on STMicrolectronics SoCs.
> ehci support will be then available on both type A
> USB 2.0 connectors.
>
> Signed-off-by: Patrice Chotard
> ---
>
> v2: _ update erro
On 22 March 2017 at 22:44, Wenyou Yang wrote:
> The intention of the removal is the preparation to introduce the
> new AT91 PIO pinctrl driver.
>
> Use the union to make the PIO3 and PIO2's registers be together
> and make their offset aligned.
>
> Signed-off-by: Wenyou Yang
> ---
>
> Changes in
Hi Igor,
On 14 March 2017 at 07:11, Igor Grinberg wrote:
> Hi Simon,
>
> On 03/12/17 22:21, Simon Glass wrote:
>> Hi Igor,
>>
>> On 5 March 2017 at 01:39, Igor Grinberg wrote:
>>> Hi Simon,
>>>
>>> On 03/03/17 06:53, Simon Glass wrote:
Hi Igor,
On 22 February 2017 at 00:35, Igor G
On 22 March 2017 at 22:48, Wenyou Yang wrote:
> Add the driver model support for Atmel mci while retaining the
> existing legacy code. This allows the driver to support boards
> that have converted to driver model as well as those that have not.
>
> Signed-off-by: Wenyou Yang
> ---
>
> Changes in
+Bin
Hi,
On 26 March 2017 at 05:48, Andy Shevchenko
wrote:
> On Mon, 2017-03-13 at 16:09 +0200, Andy Shevchenko wrote:
>> On Fri, Mar 3, 2017 at 12:31 PM, Kever Yang > > wrote:
>> > On 02/28/2017 08:04 PM, Andy Shevchenko wrote:
>> > >
>> > > Add a specific serial driver for Intel MID platforms.
Hi Andy,
On 20 March 2017 at 06:51, Andy Shevchenko
wrote:
> On Sun, 2017-03-19 at 20:30 -0600, Simon Glass wrote:
>> Hi Andy,
>>
>> On 15 March 2017 at 12:25, Andy Shevchenko
>> wrote:
>> > On some systems SDHCI controllers may be powered off and it's
>> > required
>> > to bring them on before
Hi Marcel,
On 24 March 2017 at 18:18, Marcel Ziswiler wrote:
> From: Marcel Ziswiler
>
> This patch adds board support for the Toradex Apalis TK1 a computer on
> module which can be used on different carrier boards.
>
> The module consists of a Tegra TK1 SoC, a PMIC solution, 2 GB of DDR3L
> RAM
On 22 March 2017 at 22:50, Wenyou Yang wrote:
> Add the clock support.
>
> Signed-off-by: Wenyou Yang
> ---
>
> drivers/serial/atmel_usart.c | 37 +++--
> 1 file changed, 35 insertions(+), 2 deletions(-)
Reviewed-by: Simon Glass
_
On 20 March 2017 at 16:01, Jernej Skrabec wrote:
> Video driver for older Allwinner SoCs uses cfb console framework which
> in turn uses struct ctfb_res_modes to hold timing informations. However,
> DM video framework uses different structure - struct display_timing.
>
> It makes more sense to con
On 28 March 2017 at 02:58, Philipp Tomsich
wrote:
> From: Jakob Unterwurzacher
>
> The RK3399-Q7 (Puma) unsually (this is a build-time option for
> customised boards) has an on-module SPI-flash connected to SPI1.
> As of today, this is a Winbond W25Q32DW (32MBit) device.
>
> The SPI5 controller i
On 22 March 2017 at 22:55, Wenyou Yang wrote:
> When the CONFIG_ATMEL_LEGACY is undefined, according to the following
> defines, at91_set_gpio_value() references to at91_set_pio_value(x, y)
> with two parameters.
> #define at91_set_gpio_value(x, y) at91_set_pio_value(x, y)
> #define at91_ge
Hi Patrice,
On 23 March 2017 at 03:59, Patrice CHOTARD wrote:
> Hi Simon
>
> On 03/22/2017 02:05 PM, Simon Glass wrote:
>> Hi,
>>
>> On 17 March 2017 at 10:25, wrote:
>>> From: Patrice Chotard
>>>
>>> Add support for on-chip ehci controller available
>>> on STMicrolectronics SoCs.
>>> ehci sup
On 26 March 2017 at 07:01, Heiko Stuebner wrote:
> Am Samstag, 25. März 2017, 19:17:33 CEST schrieb Simon Glass:
>> Hi Heiko,
>>
>> On 24 March 2017 at 01:32, Heiko Stübner wrote:
>> > Am Donnerstag, 23. März 2017, 21:28:08 CET schrieb Simon Glass:
>> >> Hi Heiko,
>> >>
>> >> On 20 March 2017 at
Hi Tom,
On 21 March 2017 at 08:07, Tom Rini wrote:
> On Sat, Feb 04, 2017 at 07:34:59PM -0800, Simon Glass wrote:
>> Hi,
>>
>> On 17 January 2017 at 21:50, Simon Glass wrote:
>> > So far U-Boot uses a 'flat' device tree, which means that it is decoded
>> > on the fly as needed. This uses the lib
Hi Bin,
On 22 March 2017 at 03:27, Bin Meng wrote:
> Hi Simon,
>
> On Fri, Mar 17, 2017 at 7:50 PM, Simon Glass wrote:
>> Add 'pci regions' which lists the I/O and memory regions accessible from
>> the PCI controller.
>>
>> Signed-off-by: Simon Glass
>> ---
>>
>> cmd/pci.c | 49 +++
Hi Ken,
On 23 March 2017 at 03:29, wrote:
> From: Ken Ma
>
> *** BLURB HERE ***
You might want to try patman which can generate patches, cover letter
and change logs for you.
> 1. Move base, max_lun and max_id such scsi generic data from platdata to
> uclass plat data;
> 2. Make scsi compati
On 23 March 2017 at 03:29, wrote:
> From: Ken Ma
>
> - Add mvebu scsi driver which is based on scsi uclass so that
> scsi command can work when driver model is enabled for scsi;
> - Mvebu scsi is serial attached scsi and act as an add-on host
> bus adapter.
>
> Signed-off-by: Ken Ma
> Cc: S
1 - 100 of 172 matches
Mail list logo
