Hi Patrice,
On 22 March 2017 at 03:54, <patrice.chot...@st.com> wrote:
> From: Patrice Chotard <patrice.chot...@st.com>
>
> Add support for on-chip ehci controller available
> on STMicrolectronics SoCs.
> ehci support will be then available on both type A
> USB 2.0 connectors.
>
> Signed-off-by: Patrice Chotard <patrice.chot...@st.com>
> ---
>
> v2: _ update error messages
> _ add remove callback to put core into reset
>
>
> drivers/usb/host/Kconfig | 9 ++++
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ehci-sti.c | 115
> ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 125 insertions(+)
> create mode 100644 drivers/usb/host/ehci-sti.c
Reviewed-by: Simon Glass <s...@chromium.org>
Please see below.
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 5129a57..d66f49e 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -120,6 +120,15 @@ config USB_EHCI_MSM
> This driver supports combination of Chipidea USB controller
> and Synapsys USB PHY in host mode only.
>
> +config USB_EHCI_STI
> + bool "Support for STMicroelectronics on-chip EHCI USB controller"
> + depends on ARCH_STI
> + select STI_PHY_USB
> + default y
> + ---help---
> + Enables support for the on-chip EHCI controller on
> + STMicroelectronics SoCs.
> +
> config USB_EHCI_ZYNQ
> bool "Support for Xilinx Zynq on-chip EHCI USB controller"
> depends on ARCH_ZYNQ
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index 58c0cf5..303aa32 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -46,6 +46,7 @@ obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
> obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
> obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
> obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
> +obj-$(CONFIG_USB_EHCI_STI) += ehci-sti.o
> obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o
> obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
> obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
> diff --git a/drivers/usb/host/ehci-sti.c b/drivers/usb/host/ehci-sti.c
> new file mode 100644
> index 0000000..390709d
> --- /dev/null
> +++ b/drivers/usb/host/ehci-sti.c
> @@ -0,0 +1,115 @@
> +/*
> + * Copyright (c) 2017
> + * Patrice Chotard <patrice.chot...@st.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include "ehci.h"
> +#include <reset-uclass.h>
> +#include <usb.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +struct sti_ehci_priv {
> + struct ehci_ctrl ctrl;
> + struct reset_ctl power_ctl;
> + struct reset_ctl softreset_ctl;
> +};
> +
> +static int sti_ehci_probe(struct udevice *dev)
> +{
> + struct sti_ehci_priv *priv = dev_get_priv(dev);
> + struct ehci_hccr *hccr = priv->ctrl.hccr;
> + struct ehci_hcor *hcor;
> + struct udevice *dev_phy;
> + int ret, phy_node;
> +
> + hccr = (struct ehci_hccr *)dev_get_addr(dev);
> +
> + if (hccr == (void *)FDT_ADDR_T_NONE)
> + return -EINVAL;
> +
> + ret = reset_get_by_name(dev, "power", &priv->power_ctl);
> + if (ret) {
> + error("can't get power for %s (%d)", dev->name, ret);
> + return ret;
> + }
> +
> + ret = reset_get_by_name(dev, "softreset", &priv->softreset_ctl);
> + if (ret) {
> + error("can't get soft reset for %s (%d)", dev->name, ret);
> + return ret;
> + }
> +
> + ret = reset_deassert(&priv->softreset_ctl);
> + if (ret < 0) {
> + error("EHCI soft reset deassert failed: %d", ret);
> + return ret;
> + }
> +
> + ret = reset_deassert(&priv->power_ctl);
> + if (ret < 0) {
> + error("EHCI power deassert failed: %d", ret);
> + return ret;
> + }
> +
> + /* get phy node */
> + phy_node = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset,
> "phys");
> + if (phy_node <= 0) {
> + error("USB PHY DT node not found.\n");
> + return -ENODEV;
> + }
> +
> + /* probe associated phy */
> + ret = uclass_get_device_by_of_offset(UCLASS_MISC, phy_node, &dev_phy);
Is it possible to replace the above two calls with
uclass_get_device_by_phandle()?
> +
> + hcor = (struct ehci_hcor *)((phys_addr_t)hccr +
> + HC_LENGTH(ehci_readl(&(hccr)->cr_capbase)));
> +
> + return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST);
> +}
> +
> +static int sti_ehci_remove(struct udevice *dev)
> +{
> + struct sti_ehci_priv *priv = dev_get_priv(dev);
> + int ret;
> +
> + ret = ehci_deregister(dev);
> + if (ret)
> + return ret;
> +
> + ret = reset_assert(&priv->power_ctl);
> + if (ret < 0) {
> + error("EHCI power assert failed: %d", ret);
> + return ret;
> + }
> +
> + ret = reset_assert(&priv->softreset_ctl);
> + if (ret < 0) {
> + error("EHCI soft reset assert failed: %d", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct udevice_id sti_usb_ids[] = {
> + { .compatible = "st,st-ehci-300x" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(ehci_sti) = {
> + .name = "ehci_sti",
> + .id = UCLASS_USB,
> + .of_match = sti_usb_ids,
> + .probe = sti_ehci_probe,
> + .remove = sti_ehci_remove,
> + .ops = &ehci_usb_ops,
> + .priv_auto_alloc_size = sizeof(struct sti_ehci_priv),
> + .flags = DM_FLAG_ALLOC_PRIV_DMA,
> +};
> --
> 1.9.1
>
Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
