Add bus argument to eeprom_init(), so that it can select
the I2C bus number on which the eeprom resides. Any negative
value of the $bus argument will preserve the old behavior.
This is in place so that old code does not randomly break.
Signed-off-by: Marek Vasut
Cc: Simon Glass
Cc: Tom Rini
Cc:
Add additional parameter into the eeprom command to select
the I2C bus on which the eeprom resides.
Signed-off-by: Marek Vasut
Cc: Simon Glass
Cc: Tom Rini
Cc: Heiko Schocher
---
common/cmd_eeprom.c | 15 +++
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/common/cm
Implement default value of 8 for this macro and pull out all of
this macro out of the code. The default value of 8 actually does
implement exactly the same behavior as the previous code which
was in the #else clause of the ifdef.
Signed-off-by: Marek Vasut
Cc: Simon Glass
Cc: Tom Rini
Cc: Heiko
The kernel_addr_r should be set to the same value as CONFIG_LOADADDR,
get rid of the duplication.
Signed-off-by: Marek Vasut
Cc: Sean Cross
Cc: Stefano Babic
---
include/configs/novena.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/novena.h b/include/conf
On Tuesday, November 04, 2014 at 05:01:47 PM, Andreas Bießmann wrote:
> This rewrite uses lately promoted eeprom_init(int) function to choose the
> right I2C bus when writing data to the EEPROM.
>
> Signed-off-by: Andreas Bießmann
> Cc: Marek Vasut
I am back! Yes, picked this up, thanks!
Best
From: Vagrant Cascadian
Switch Novena to distro bootcmd, so it can be used with debian easily.
Signed-off-by: Vagrant Cascadian
Signed-off-by: Marek Vasut
Cc: Sean Cross
Cc: Stefano Babic
---
include/configs/novena.h | 23 ++-
1 file changed, 22 insertions(+), 1 deletion
Hi Albert,
On 9 November 2015 at 17:20, Albert ARIBAUD wrote:
> board_init_f_mem() alters the C runtime environment's
> stack it ls actually already using. This is not a valid
> C runtime environment and may conflict with the C compiler's
> expectations.
>
> Split board_init_f_mem into C function
On 11/10/2015 11:52 AM, Wolfgang Denk wrote:
> Dear York,
>
> In message <5642490c.9090...@freescale.com> you wrote:
>>
+- CONFIG_FSL_PPA_RESERVED_DRAM_SIZE
+ If defined, this is reserved in highest address as secure memory
>>>
>>> What is Freescale-specific about the concept of reser
On Tue, Nov 10, 2015 at 09:14:38AM -0500, Tom Rini wrote:
> A few config files have been added without updating MAINTAINERS.
>
> Reported-by: Albert ARIBAUD
> Signed-off-by: Tom Rini
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
_
On Fri, Nov 06, 2015 at 12:44:01PM +, Måns Rullgård wrote:
> A number of headers define functions as "extern inline" which is
> causing problems with gcc5. The reason is that starting with
> version 5.1, gcc defaults to the standard C99 semantics for the
> inline keyword.
>
> Under the tradi
On Sun, Oct 25, 2015 at 10:32:28AM +0530, Prabhakar Kushwaha wrote:
> From: Zhenhua Luo
>
> In binutils-2.25, the _GLOBAL_OFFSET_TABLE_ symbols defined by PROVIDE in
> u-boot.lds overrides the linker built-in symbols
> (https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;
> h=b
On Tue, Nov 10, 2015 at 09:18:50AM -0500, Tom Rini wrote:
> In 522b021 we dropped 'PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4)' lines in
> the mpc85xx linker scripts as this is not required and breaks newer
> binutils. This commit cleans up the rest of the powerpc linker scripts.
>
> Signed-off-by: T
On Tue, Nov 10, 2015 at 06:45:40PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit e490ad25eb3dc4f075ed33b4b00b1f97071fcf3d:
>
> ARM64: zynqmp: Sync zynq_sdhci_init() declaration (2015-11-07 08:17:54
> -0500)
>
> are available in the git repository at:
>
>
Hi Michal,
On Tue, Nov 10, 2015 at 7:00 AM, Michal Simek wrote:
>
> From: "Edgar E. Iglesias"
>
> Code is taken from Linux kernel driver (v4.2).
>
> Signed-off-by: Edgar E. Iglesias
> Signed-off-by: Michal Simek
Acked-by: Joe Hershberger
___
U-Boot
On Tue, Nov 10, 2015 at 5:16 AM, wrote:
> From: Shaohui Xie
>
> The phy can share driver with other aquantia PHYs, so we only added PHY
> ID.
>
> Signed-off-by: Shaohui Xie
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
http:
On 11/10/2015 11:51 AM, Scott Wood wrote:
> On Tue, 2015-11-10 at 11:44 -0800, York Sun wrote:
>>
>> On 11/10/2015 11:31 AM, Scott Wood wrote:
>>> On Tue, 2015-11-10 at 11:17 -0800, York Sun wrote:
Primary Protected Application (PPA) is the base of TrustZone for
Freescale Layerscape SoC
On Tue, Nov 10, 2015 at 1:38 PM, Fabio Estevam wrote:
>> Are you using CONFIG_SYS_MALLOC_F?
>
> No, I am not, but I have also tried adding CONFIG_SYS_MALLOC_F_LEN
> inside configs/mx6sabresd_spl_defconfig, but it did not help.
Sorry, you asked for CONFIG_SYS_MALLOC_F. I do have CONFIG_SYS_MALLOC
Hi Fabio,
On 10 November 2015 at 14:16, Fabio Estevam wrote:
> On Tue, Nov 10, 2015 at 1:38 PM, Fabio Estevam wrote:
>
>>> Are you using CONFIG_SYS_MALLOC_F?
>>
>> No, I am not, but I have also tried adding CONFIG_SYS_MALLOC_F_LEN
>> inside configs/mx6sabresd_spl_defconfig, but it did not help.
Hi Simon,
On Tue, Nov 10, 2015 at 7:19 PM, Simon Glass wrote:
> Then I wonder why malloc() is failing? Is it because there is too much
In the example I sent I only allocate 64 bytes. malloc() does fail
even if I decrease this number.
> being allocated, or is the simple malloc region not being
Hi Fabio,
On 10 November 2015 at 14:23, Fabio Estevam wrote:
> Hi Simon,
>
> On Tue, Nov 10, 2015 at 7:19 PM, Simon Glass wrote:
>
>> Then I wonder why malloc() is failing? Is it because there is too much
>
> In the example I sent I only allocate 64 bytes. malloc() does fail
> even if I decrease
From: Vagrant Cascadian
Switch Novena to distro bootcmd, so it can be used with debian easily.
Signed-off-by: Vagrant Cascadian
Signed-off-by: Marek Vasut
Cc: Sean Cross
Cc: Stefano Babic
---
include/configs/novena.h | 22 +-
1 file changed, 21 insertions(+), 1 deletion(
On Tuesday, November 10, 2015 at 09:54:52 PM, Vagrant Cascadian wrote:
> On 2015-11-10, Marek Vasut wrote:
> > Switch Novena to distro bootcmd, so it can be used with debian easily.
>
> ...
>
> > diff --git a/include/configs/novena.h b/include/configs/novena.h
> > index 718989f..b0f4c02 100644
>
On Tue, Nov 10, 2015 at 7:29 PM, Simon Glass wrote:
> Are you able to check what is happening in malloc_simple()? It is a
> really simple function.
Yes, I turned on debug inside malloc_simple() and it returns NULL:
U-Boot SPL 2015.10-00523-ge490ad2-dirty (Nov 10 2015 - 19:44:06)
malloc_simple:
Hi Fabio,
On 10 November 2015 at 14:47, Fabio Estevam wrote:
> On Tue, Nov 10, 2015 at 7:29 PM, Simon Glass wrote:
>
>> Are you able to check what is happening in malloc_simple()? It is a
>> really simple function.
>
> Yes, I turned on debug inside malloc_simple() and it returns NULL:
>
> U-Boot
On Mon, Nov 09, 2015 at 08:14:34PM -0500, Tom Rini wrote:
> After consulting with some of the SPDX team, the conclusion is that
> Makefiles are worth adding SPDX-License-Identifier tags too, and most of
> ours have one. This adds tags to ones that lack them and converts a few
> that had full (or
Hello Simon,
On Tue, 10 Nov 2015 13:04:50 -0700, Simon Glass
wrote:
> I'm hoping we don't have to bring back this assembler.
What we need in ASM is just the part that actually alters the stack
(i.e., changes the SP of the architecture) so that no C function has to
do it.
> Do we really need to
Hi Hans,
On 9 November 2015 at 12:25, Simon Glass wrote:
> Hi Hans,
>
> On 9 November 2015 at 00:22, Hans de Goede wrote:
>> Hi,
>>
>> On 09-11-15 07:48, Simon Glass wrote:
>>>
>>> Each scan of the USB bus may return different results. Existing
>>> driver-model
>>> devices are reused when found,
Add 3c120 and 10m50 devboards MAINTAINERS
Signed-off-by: Thomas Chou
---
board/altera/nios2/MAINTAINERS | 13 +
1 file changed, 13 insertions(+)
create mode 100644 board/altera/nios2/MAINTAINERS
diff --git a/board/altera/nios2/MAINTAINERS b/board/altera/nios2/MAINTAINERS
new file m
Rename board nios2-generic to 3c120_devboard. Since nios2 is
converted to driver model and device tree control of u-boot,
the nios2-generic board directory is removed. We can rename
the board back to a real board name. Now the boards maintained
in u-boot mainline are the same as Linux kernel, namel
The 10m50 devboard becomes the new golden reference design of
Nios II Linux. So change README.nios2 to use 10m50 as template.
Signed-off-by: Thomas Chou
---
v3
use 10m50 as template.
doc/README.nios2 | 14 +++---
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/doc/README
Hi Fabio,
On 6 November 2015 at 04:24, Tom Rini wrote:
> On Thu, Nov 05, 2015 at 12:43:42PM -0200, Fabio Estevam wrote:
>
>> Many SPI flashes have protection bits (BP2, BP1 and BP0) in the
>> status register that can protect selected regions of the SPI NOR.
>>
>> Take these bits into account when
On Wednesday, November 11, 2015 at 01:06:15 AM, Thomas Chou wrote:
> Add 3c120 and 10m50 devboards MAINTAINERS
>
> Signed-off-by: Thomas Chou
All is good with this series.
Acked-by: Marek Vasut
And thanks for all your good work, it's amazing!
Best regards,
Marek Vasut
___
On Tue, Nov 10, 2015 at 04:09:52PM -0800, Simon Glass wrote:
> Hi Fabio,
>
> On 6 November 2015 at 04:24, Tom Rini wrote:
> > On Thu, Nov 05, 2015 at 12:43:42PM -0200, Fabio Estevam wrote:
> >
> >> Many SPI flashes have protection bits (BP2, BP1 and BP0) in the
> >> status register that can prote
Hi Simon,
On Tue, Nov 10, 2015 at 10:09 PM, Simon Glass wrote:
> This patch breaks chromebook_link - I think because it adds a new
> operation which is not supported by all flash chips. Those that are
> not supported (i.e that don't have the 'flash_is_locked' method)
> should still work.
What i
Hi Stefano,
On Tue, Nov 10, 2015 at 02:14:10PM +0100, Albert ARIBAUD wrote:
>Hello Peng,
>
>On Fri, 23 Oct 2015 10:13:03 +0800, Peng Fan
>wrote:
>> The code such as PSCI in section named secure is bundled with
>> u-boot image, and when bootm, the code will be copied to their
>> runtime address sa
Hi Marek,
On 2015年11月11日 08:27, Marek Vasut wrote:
On Wednesday, November 11, 2015 at 01:06:15 AM, Thomas Chou wrote:
Add 3c120 and 10m50 devboards MAINTAINERS
Signed-off-by: Thomas Chou
All is good with this series.
Acked-by: Marek Vasut
And thanks for all your good work, it's amazing!
On Wednesday, November 11, 2015 at 02:18:26 AM, Thomas Chou wrote:
> Hi Marek,
Hi!
> On 2015年11月11日 08:27, Marek Vasut wrote:
> > On Wednesday, November 11, 2015 at 01:06:15 AM, Thomas Chou wrote:
> >> Add 3c120 and 10m50 devboards MAINTAINERS
> >>
> >> Signed-off-by: Thomas Chou
> >
> > All i
Hi Marek,
On 2015年11月11日 09:18, Thomas Chou wrote:
I still miss some toolchains, like bfin. I can not find them on the
internet. I will need to search my old HDDs. However, most others works.
Do you have better results?
I look at sourceforge again. And the bfin toolchains is back.
Best regard
On Tue, 2015-11-10 at 12:24 -0800, York Sun wrote:
>
> On 11/10/2015 11:51 AM, Scott Wood wrote:
> > On Tue, 2015-11-10 at 11:44 -0800, York Sun wrote:
> > >
> > > On 11/10/2015 11:31 AM, Scott Wood wrote:
> > > > On Tue, 2015-11-10 at 11:17 -0800, York Sun wrote:
> > > > > Primary Protected Appl
This updates git-mailrc to add me as a maintainer of x86.
Signed-off-by: Bin Meng
---
doc/git-mailrc | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/doc/git-mailrc b/doc/git-mailrc
index 6fe78a1..5b0af80 100644
--- a/doc/git-mailrc
+++ b/doc/git-mailrc
@@ -17,6 +17,7 @@ al
On Wednesday, November 11, 2015 at 02:48:04 AM, Thomas Chou wrote:
> Hi Marek,
>
> On 2015年11月11日 09:18, Thomas Chou wrote:
> > I still miss some toolchains, like bfin. I can not find them on the
> > internet. I will need to search my old HDDs. However, most others works.
> > Do you have better re
Hi Marek,
On 2015年11月11日 09:41, Marek Vasut wrote:
I gave up on buildman. I want some builder where I can stop the builds if
something goes wrong, but instead of this, buildman spawns multiple processes
somewhere on my machine at random and I have no control over that. I'd like
to reevaluate bui
Hi Fabio,
On 10 November 2015 at 16:51, Fabio Estevam wrote:
>
> Hi Simon,
>
> On Tue, Nov 10, 2015 at 10:09 PM, Simon Glass wrote:
>
> > This patch breaks chromebook_link - I think because it adds a new
> > operation which is not supported by all flash chips. Those that are
> > not supported (i
On Wednesday, November 11, 2015 at 03:55:10 AM, Thomas Chou wrote:
> Hi Marek,
>
> On 2015年11月11日 09:41, Marek Vasut wrote:
> > I gave up on buildman. I want some builder where I can stop the builds if
> > something goes wrong, but instead of this, buildman spawns multiple
> > processes somewhere
On Fri, Nov 6, 2015 at 8:08 PM, Simon Glass wrote:
> On 6 November 2015 at 03:04, Bin Meng wrote:
>> The call to pci_run_vga_bios() is not needed as this is handled
>> in the vesa_fb driver.
>>
>> Signed-off-by: Bin Meng
>> ---
>>
>> Changes in v2: None
>>
>> arch/x86/cpu/qemu/pci.c | 19 +-
On Sat, Nov 7, 2015 at 7:57 AM, Simon Glass wrote:
> On 6 November 2015 at 02:04, Bin Meng wrote:
>> Move chipset-specific codes such as PAM init, PCIe ECAM and MP table
>> from pci.c to qemu.c, to prepare for DM PCI conversion.
>>
>> Signed-off-by: Bin Meng
>> ---
>>
>> Changes in v2: None
>>
>
On Sat, Nov 7, 2015 at 7:58 AM, Simon Glass wrote:
> On 6 November 2015 at 02:04, Bin Meng wrote:
>> Move to driver model for ETH (e1000) on QEMU.
>>
>> Signed-off-by: Bin Meng
>>
>> ---
>>
>> Changes in v2:
>> - Rebase on top of u-boot/master
>> - New patch to convert to use driver model eth
>>
On Sat, Nov 7, 2015 at 7:58 AM, Simon Glass wrote:
> On 6 November 2015 at 02:04, Bin Meng wrote:
>> Move to driver model for USB on QEMU.
>>
>> Signed-off-by: Bin Meng
>>
>> ---
>>
>> Changes in v2: None
>>
>> configs/qemu-x86_defconfig | 2 ++
>> 1 file changed, 2 insertions(+)
>
> Acked-by:
On Sat, Nov 7, 2015 at 7:57 AM, Simon Glass wrote:
> On 6 November 2015 at 02:04, Bin Meng wrote:
>> Move to driver model for pci on QEMU.
>>
>> Signed-off-by: Bin Meng
>> ---
>>
>> Changes in v2: None
>>
>> arch/x86/cpu/qemu/Makefile | 1 -
>> arch/x86/cpu/qemu/pci.c| 49
>> -
On Sat, Nov 7, 2015 at 7:58 AM, Simon Glass wrote:
> On 6 November 2015 at 02:04, Bin Meng wrote:
>> These are leftover when converted to use driver model pci.
>>
>> Signed-off-by: Bin Meng
>> ---
>>
>> Changes in v2: None
>>
>> include/configs/crownbay.h | 12
>> 1 file changed, 1
On Sat, Nov 7, 2015 at 7:58 AM, Simon Glass wrote:
> On 6 November 2015 at 02:04, Bin Meng wrote:
>> Now that we have converted all x86 boards to use driver model pci,
>> remove these legacy pci codes.
>>
>> Signed-off-by: Bin Meng
>> ---
>>
>> Changes in v2: None
>>
>> arch/x86/cpu/pci.c
On Sat, Nov 7, 2015 at 7:58 AM, Simon Glass wrote:
> On 6 November 2015 at 02:04, Bin Meng wrote:
>> CONFIG_SYS_EARLY_PCI_INIT is not needed any more since with driver
>> model, PCI enumeration is automatically triggered.
>>
>> Signed-off-by: Bin Meng
>>
>> ---
>>
>> Changes in v2: None
>>
>> i
Hi Marek,
On 2015年11月11日 11:02, Marek Vasut wrote:
I'd use "killall python" on another terminal to stop the builder.
I absolutelly don't want to do killall python, it'd bring down much more than
this buildman ;-)
It does depend. On my desktop, there is no other python running as user.
I wo
Hi Albert,
Thanks for the response!
On 11/10/2015 5:44 PM, Albert ARIBAUD wrote:
> Hello Vignesh,
>
> On Tue, 10 Nov 2015 14:29:54 +0530, Vignesh R wrote:
>> Hi,
>>
>> With commit 7ae8350f67eea("ti: armv7: Move SPL SDRAM init to the right
>> place, drop unused CONFIG_SPL_STACK") QSPI XIP boot a
Hi Tom,
Please pull the following patches for Blackfin from u-boot-blackfin
into your tree.
Thanks
Sonic Zhang
The following changes since commit 83bf005710a1e01341de5e2f44a3ce082717e313:
arm: at91: reworked meesc board support (2015-11-03 14:21:32 +0100)
are available in the git repositor
Hello Vignesh,
On Wed, 11 Nov 2015 11:42:55 +0530, R, Vignesh wrote:
> Hi Albert,
>
> Thanks for the response!
>
> On 11/10/2015 5:44 PM, Albert ARIBAUD wrote:
> > Hello Vignesh,
> >
> > On Tue, 10 Nov 2015 14:29:54 +0530, Vignesh R wrote:
> >> Hi,
> >>
> >> With commit 7ae8350f67eea("ti: arm
101 - 156 of 156 matches
Mail list logo
