> Am 17.04.2014 um 02:46 schrieb York Sun :
>
>> On 04/11/2014 08:09 AM, Alexander Graf wrote:
>> diff --git a/nand_spl/board/freescale/mpc8572ds/Makefile
>> b/nand_spl/board/freescale/mpc8572ds/Makefile
>> index c639b12..c58b7a4 100644
>> --- a/nand_spl/board/freescale/mpc8572ds/Makefile
>> ++
From: Tang Yuantian
When T104x soc wakes up from deep sleep, control is passed to the
primary core that starts executing uboot. After re-initialized some
IP blocks, like DDRC, kernel will take responsibility to continue
to restore environment it leaves before.
Signed-off-by: Tang Yuantian
---
b
From: Tang Yuantian
Add deep sleep support on T1040QDS platform.
Signed-off-by: Tang Yuantian
---
board/freescale/t1040qds/t1040qds.c | 12
include/configs/T1040QDS.h | 4
2 files changed, 16 insertions(+)
diff --git a/board/freescale/t1040qds/t1040qds.c
b/board/f
From: Tang Yuantian
Add deep sleep support on T104xRDB platforms.
Signed-off-by: Tang Yuantian
---
board/freescale/t104xrdb/t104xrdb.c | 10 ++
include/configs/T104xRDB.h | 4
2 files changed, 14 insertions(+)
diff --git a/board/freescale/t104xrdb/t104xrdb.c
b/board/fr
This driver is processed as two USB hub despite one.
The number of root hub is defined in R8A66597_MAX_ROOT_HUB.
This fixes that register is accessed by using the definition
of R8A66597_MAX_ROOT_HUB.
Signed-off-by: Yasuhisa Umano
---
drivers/usb/host/r8a66597-hcd.c |4 ++--
1 file changed, 2
Some functions in include/net.h are ported from
include/linux/etherdevice.h of Linux Kernel.
For ex.
is_zero_ether_addr()
is_multicast_ether_addr()
is_broadcast_ether_addr()
is_valid_ether_addr();
So, we should use the same function name as Linux Kernel,
eth_rand_addr(), for consistency.
__DATE__ and __TIME__ should not be used anymore.
Drop the debug message using them.
Signed-off-by: Masahiro Yamada
---
fs/ubifs/super.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 67f115f..748ab67 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/sup
Signed-off-by: Masahiro Yamada
---
include/common.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/include/common.h b/include/common.h
index cbd3c9e..49feac2 100644
--- a/include/common.h
+++ b/include/common.h
@@ -834,12 +834,10 @@ char *strmhz(char *buf, unsigned long hz);
#include
This commit has been imported from Linux Kernel:
commit fe7c36c7bde12190341722af69358e42171162f3
Author: Josh Triplett
Date: Mon Dec 23 13:56:06 2013 -0800
Makefile: Build with -Werror=date-time if the compiler supports it
GCC 4.9 and newer have a new warning -Wdate-time,
The aim of this series is to prohibit using __DATE__ and __TIME__.
Currently they are used in two files.
[1] arch/blackfin/include/asm/net.h
Blackfin is using __DATE__ as the seed for the random ethernet address.
This feature will be replaced with genericly-used eth_random_addr().
[2] fs/ubif
bfin_gen_rand_mac() uses __DATE__ as the seed for random ethernet
address. This is not good.
In the first place, it should not be implemented as a Bfin-specific
function. Use eth_random_addr() instead.
Signed-off-by: Masahiro Yamada
Cc: Sonic Zhang
---
arch/blackfin/include/asm/net.h |
Hi Gerhard,
On Wed, 16 Apr 2014 23:57:11 +0200, Gerhard Sittig wrote:
> On Tue, 2014-04-15 at 16:13 +0200, Albert ARIBAUD wrote:
> >
> > [ ... deeply nested 'git send-email' thread ... ]
>
> May I suggest the following git config option?
>
> [sendemail]
> chainreplyto = false
>
> This
On Thu, Apr 17, 2014 at 3:00 AM, Masahiro Yamada
wrote:
>
> Some functions in include/net.h are ported from
> include/linux/etherdevice.h of Linux Kernel.
>
> For ex.
> is_zero_ether_addr()
> is_multicast_ether_addr()
> is_broadcast_ether_addr()
> is_valid_ether_addr();
>
> So, we should u
On Wed, Apr 16, 2014 at 6:15 AM, David Müller wrote:
>
> Signed-off-by: David Mueller
> Joe Hershberger
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Initialization of r8a66597 info structure is not enough.
Because initilization was used size of pointer.
This fixes that use size of r8a6659 info structure.
Signed-off-by: Yasuhisa Umano
---
drivers/usb/host/r8a66597-hcd.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/dr
Hi Marc,
On Wed, 16 Apr 2014 17:09:07 +0100, Marc Zyngier
wrote:
> On 16/04/14 15:45, Albert ARIBAUD wrote:
> > Hi Marc,
> >
> > On Sat, 15 Feb 2014 13:36:24 +, Marc Zyngier
> > wrote:
> >
> >> PSCI is an ARM standard that provides a generic interface that
> >> supervisory software can us
Hi Stefan,
On 16/04/2014 15:36, Stefan Agner wrote:
>>>
>>> Can you better explain this ? There is only one board in mainline with
>>> vf610. CONFIG_SYS_TEXT_BASE is set to 0x3f008000. I cannot get the
>>> offset in your example. Are you referring to NAND page ? But if the
>>> header must be alig
On Thu, Apr 17 2014 at 9:34:24 am BST, Albert ARIBAUD
wrote:
> Hi Marc,
>
> On Wed, 16 Apr 2014 17:09:07 +0100, Marc Zyngier
> wrote:
>
>> On 16/04/14 15:45, Albert ARIBAUD wrote:
>> > Hi Marc,
>> >
>> > On Sat, 15 Feb 2014 13:36:24 +, Marc Zyngier
>> > wrote:
>> >
>> >> PSCI is an ARM s
Hi Tim,
On 17/04/2014 08:16, Tim Harvey wrote:
>>> + boot_dev = MX6_SATA_BOOT;
>>> + break;
>>> + /* Serial ROM: See 8.5.5.1, Table 8-22 */
>>> + case 0x3:
>>> + /* BOOT_CFG4[2:0] */
>>> + switch ((soc_sbmr & 0x0700) >> 24) {
>>> +
Hi Pantelis,
> From: Gabbasov, Andrew
> Sent: Thursday, April 03, 2014 13:32
> To: Pantelis Antoniou
> Cc: u-boot@lists.denx.de
> Subject: RE: [U-Boot] [PATCH] mmc: Handle switch error status bit in MMC card
> status
>
> Hi Pantelis,
>
> > From: Pantelis
Hi Tim,
On 17/04/2014 08:07, Tim Harvey wrote:
> On Mon, Apr 14, 2014 at 5:35 AM, Stefano Babic wrote:
>> Hi Tim,
>>
>> I see checking your patch that the MXS uses the same concept. And as far
>> as I can see, boot_mode_idx is used only to print the boot devioce
>
> Stefano,
>
> yes, that is wh
Hi Marc,
On Thu, 17 Apr 2014 09:58:19 +0100, Marc Zyngier
wrote:
> On Thu, Apr 17 2014 at 9:34:24 am BST, Albert ARIBAUD
> wrote:
> > Hi Marc,
> >
> > On Wed, 16 Apr 2014 17:09:07 +0100, Marc Zyngier
> > wrote:
> >
> >> On 16/04/14 15:45, Albert ARIBAUD wrote:
> >> > Hi Marc,
> >> >
> >> >
Hi Sergey,
On Thu, 6 Mar 2014 21:20:20 +0400, Sergey Kostanbaev
wrote:
> diff --git a/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
> b/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
> index bf2fa2a..3ac0f88 100644
> --- a/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
> +++ b/arch/arm/cpu/arm920t/ep9
Hi, Scott:
I have a question about nand chip's ecc bits:
Nand chip usually declared its ecc bits for each 512 bytes in its data
sheet.
Such as:
Some nand chips required 4bit ECC for each 512 bytes.
Some nand chips required 2bit ECC for each 512 bytes.
So, my question is:
Could ecc bits be
On Thu, 2014-04-17 at 09:58 +0100, Marc Zyngier wrote:
> Ian Campbell (cc-ed) is actively pushing out patches to support the A20
> in mainline U-Boot (I believe you've been on the receiving end of
> these),
Need to make a few more cleanups based on the review but v$NEXT should
be along soon.
> an
Dear Masahiro,
In message <1397721632-18797-1-git-send-email-yamad...@jp.panasonic.com> you
wrote:
>
> The aim of this series is to prohibit using __DATE__ and __TIME__.
What is bad about using these?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Det
Dear Masahiro,
In message <1397721632-18797-3-git-send-email-yamad...@jp.panasonic.com> you
wrote:
> Some functions in include/net.h are ported from
> include/linux/etherdevice.h of Linux Kernel.
>
> For ex.
> is_zero_ether_addr()
> is_multicast_ether_addr()
> is_broadcast_ether_addr()
>
On Thursday, April 17, 2014 at 09:48:32 AM, yasuhisa umano wrote:
> This driver is processed as two USB hub despite one.
> The number of root hub is defined in R8A66597_MAX_ROOT_HUB.
> This fixes that register is accessed by using the definition
> of R8A66597_MAX_ROOT_HUB.
>
> Signed-off-by: Yasuh
Hi Wolfgang
On Thu, 17 Apr 2014 13:07:32 +0200
Wolfgang Denk wrote:
> Dear Masahiro,
>
> In message <1397721632-18797-1-git-send-email-yamad...@jp.panasonic.com> you
> wrote:
> >
> > The aim of this series is to prohibit using __DATE__ and __TIME__.
>
> What is bad about using these?
inclu
Hi Igor, hi Tim
On 17/04/2014 13:22, Igor Grinberg wrote:
>
> get_ram_size() works on cm-fx6 all DRAM configurations.
As on most boards in mainline ;-)
>
>>
SPL is thought to generally load an image (of course, in most cases it
is u-boot). In Falcon mode, the kernel is started witho
Hi Stefano, Tim,
On 04/17/14 12:30, Stefano Babic wrote:
> Hi Tim,
>
> On 17/04/2014 08:07, Tim Harvey wrote:
>> On Mon, Apr 14, 2014 at 5:35 AM, Stefano Babic wrote:
>>> Hi Tim,
>>>
>>> I see checking your patch that the MXS uses the same concept. And as far
>>> as I can see, boot_mode_idx is u
Hi Stefan,
On 16/04/2014 15:17, Stefan Agner wrote:
>
> Quite possible that an altered/correct FCB would actually work. But
> speaking about FCB, is there already something for Vybrid? I'm currently
> try to create an Image with FCB+IVT V2 header using the mxsboot utility,
mxsboot is not the rig
Hi Masahiro,
On 16/04/2014 08:44, Masahiro Yamada wrote:
> arch/arm/include/asm/spl.h requires all SoCs to have
> arch/arm/include/asm/arch-*/spl.h.
>
> But many of them just define BOOT_DEVICE_* macros.
>
> Those macros are used in the "switch (boot_device) { ... }"
> statement in common/spl/sp
On Mon, Apr 14, 2014 at 4:38 AM, Stefano Babic wrote:
> On 03/04/2014 08:01, Tim Harvey wrote:
>> We only need to read in the size of struct image_header and thus don't
>> need to know the page size of the nand device.
>>
>> Signed-off-by: Tim Harvey
>> ---
>> common/spl/spl_nand.c | 2 +-
>> 1
Dear Masahiro,
In message <20140417204113.6cec.aa925...@jp.panasonic.com> you wrote:
>
> I want to gather timestamp stuff to one place for easy control of it.
All understood - but this should be documented in the commit message.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH,
This serie of patches adds some functions and a sub-command of 'mmc' for
programming the authentication key and for reading and writing the RPMB
partition of an eMMC according to the JEDEC standard No. 64-A441
The sub-command rpmb is enabled by the flag CONFIG_SUPPORT_EMMC_RPMB defined
in the b
This sub-command adds support for the RPMB partition of an eMMC:
* mmc rpmb key
Programs the authentication key in the eMMC This key can not
be overwritten.
* mmc rpmb read <#count> [address of key]
Reads <#count> blocks of 256 bytes in the RPMB partition
beginning at block number . If t
This patch adds functions for read, write and authentication
key programming for the Replay Protected Memory Block partition
in the eMMC.
Signed-off-by: Pierre Aubert
CC: Pantelis Antoniou
---
drivers/mmc/Makefile |1 +
drivers/mmc/rpmb.c | 323 +++
On Thursday, April 17, 2014 at 09:48:32 AM, yasuhisa umano wrote:
> This driver is processed as two USB hub despite one.
> The number of root hub is defined in R8A66597_MAX_ROOT_HUB.
> This fixes that register is accessed by using the definition
> of R8A66597_MAX_ROOT_HUB.
>
> Signed-off-by: Yasuh
On Thursday, April 17, 2014 at 10:20:29 AM, yasuhisa umano wrote:
> Initialization of r8a66597 info structure is not enough.
> Because initilization was used size of pointer.
> This fixes that use size of r8a6659 info structure.
>
> Signed-off-by: Yasuhisa Umano
> ---
> drivers/usb/host/r8a66597
Albert,
Please pull u-boot-tegra/master into ARM/master. Thanks!
./MAKEALL -s tegra AOK, checkpatch.pl is OK, and ./MAKEALL -a arm only
shows failures that were already present in ARM/master.
The following changes since commit 1b82491ee6ee1e986e5521b33692a00e1f38fe75:
board:tricorder: fixup S
Since dfu read/write operations needs to be flushed manually,
writing to filesystem on MMC by thor was broken. MMC raw write
actually is working fine because current dfu_flush() function
writes filesystem only. This commit adds dfu_flush() to f_thor
and now filesystem write is working.
This change
On Thursday, April 17, 2014 at 07:31:00 PM, Przemyslaw Marczak wrote:
> Since dfu read/write operations needs to be flushed manually,
> writing to filesystem on MMC by thor was broken. MMC raw write
> actually is working fine because current dfu_flush() function
> writes filesystem only. This commi
On Thu, Apr 10, 2014 at 11:35:25AM +0200, yegorsli...@googlemail.com wrote:
> From: Yegor Yefremov
>
> Signed-off-by: Yegor Yefremov
> ---
> arch/arm/include/asm/arch-am33xx/clock.h |2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-am33xx
I've now merged next into master and pushed, along with re-applying the
change that makes non-COFNIG_SYS_GENERIC_BOARD boards complain at
run-time. I'm going to be grabbing some other patches shortly, of the
type that easily conflict and I don't want to have to have them be
rebased again.
--
Tom
The Linux get_maintainer.pl can often produce a whole lot of results.
As a result you'll sometimes blow your CC field over 1024 characters
and that can cause listservs to reject your message.
As a stopgap, call get_maintainer.pl with "--non" so it doesn't
include real names. This will dramaticall
On Thu 17 Apr 2014 17:00:30 Masahiro Yamada wrote:
> --- a/include/configs/tcm-bf537.h
> +++ b/include/configs/tcm-bf537.h
> @@ -73,7 +73,7 @@
> #define CONFIG_HOSTNAME tcm-bf537
> /* Uncomment next line to use fixed MAC address */
> /* #define CONFIG_ETHADDR02:80:ad:20:31:e8 */
On Thu 17 Apr 2014 17:00:27 Masahiro Yamada wrote:
> The aim of this series is to prohibit using __DATE__ and __TIME__.
as long as the version.h isn't impacted, this should fine. i don't think it
is as it looks like the build will generate U_BOOT_DATE and U_BOOT_TIME into a
const string by hand
Add an option to specify the output directory to override the
default path '../'. This is useful for building in a ramdisk.
Signed-off-by: Daniel Schwierzeck
Cc: Simon Glass
---
Changes for v2:
- improved help message
---
tools/buildman/buildman.py | 3 +++
tools/buildman/control.py | 2 +-
2
On 17 April 2014 13:13, Daniel Schwierzeck wrote:
> Add an option to specify the output directory to override the
> default path '../'. This is useful for building in a ramdisk.
>
> Signed-off-by: Daniel Schwierzeck
> Cc: Simon Glass
Thanks.
Acked-by: Simon Glass
_
Hi Tom,
2014-04-07 17:41 GMT+02:00 Paul Burton :
> This series fixes issues with the pcnet driver & its memory accesses.
>
> Previously the network interface on the MIPS Malta board was unreliable
> & would often time out whilst transferring files via TFTP, but with this
> series applied it is now
> No, so far there hasn't been much discussion, and people seem happy with
> it. I have a couple of fixes lined up, but nothing major.
So, I think PSCI 0.2 calls for function numbers in the 0x8400 range.
Seems like we'll have to fix this in one of your patches:
/* PSCI interface */
#d
Dear Pierre Aubert,
In message <1397747435-24042-3-git-send-email-p.aub...@staubli.com> you wrote:
> This sub-command adds support for the RPMB partition of an eMMC:
> * mmc rpmb key
> Programs the authentication key in the eMMC This key can not
> be overwritten.
> * mmc rpmb read <#count>
iDo not initialize list_MIPS with hard-coded board names.
Use targets_by_arch() instead.
Signed-off-by: Daniel Schwierzeck
---
MAKEALL | 40 +---
1 file changed, 1 insertion(+), 39 deletions(-)
diff --git a/MAKEALL b/MAKEALL
index c54240c..020e65f 100755
---
[ Drat. I meant to send this to the U-Boot list, not just Albert. --jdl]
-- Forwarded message --
From: Jon Loeliger
Date: Thu, Apr 17, 2014 at 11:36 AM
Subject: Re: [U-Boot] [PATCH v3 00/13] ARMv7: add PSCI support to u-boot
To: Albert ARIBAUD
On Thu, Apr 17, 2014 at 3:34 AM,
I am writing the support for rtc ds1347
my driver file resides in drivers/rtc/ds1347.c
who is the custodian for the rtc subsystem of uboot
or just i have to mail patch to u-boot@lists.denx.de
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.den
With 7ce1526 we no longer need 'len' or 'res', so drop these variables.
Signed-off-by: Tom Rini
---
common/env_flash.c |3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/common/env_flash.c b/common/env_flash.c
index b3ad908..004e884 100644
--- a/common/env_flash.c
+++ b/com
This is only useful with the _spiboot build target anyhow, so only
include it then. Drop CONFIG_SPL_OS_BOOT support then as the flash is
small and didn't include a spot for the device tree already.
Signed-off-by: Tom Rini
---
include/configs/am335x_evm.h | 18 +-
1 file change
QSPI booting on this board does not use SPL, so drop SPI-SPL related
options.
Signed-off-by: Tom Rini
---
include/configs/am43xx_evm.h |8
1 file changed, 8 deletions(-)
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 4e56ffc..d5e6c4b 100644
--- a/inc
Hi
Sorry.
I failed to send patchs to ML by setting of MUA.
Best regards,
Yasuhisa
(2014/04/17 19:47), Marek Vasut wrote:
On Thursday, April 17, 2014 at 09:48:32 AM, yasuhisa umano wrote:
This driver is processed as two USB hub despite one.
The number of root hub is defined in R8A66597_MAX_ROO
Hi,
Thanks for your comment.
(2014/04/17 23:07), Marek Vasut wrote:
On Thursday, April 17, 2014 at 09:48:32 AM, yasuhisa umano wrote:
This driver is processed as two USB hub despite one.
The number of root hub is defined in R8A66597_MAX_ROOT_HUB.
This fixes that register is accessed by using th
Hi,
Thanks for your comment.
(2014/04/17 23:09), Marek Vasut wrote:
On Thursday, April 17, 2014 at 10:20:29 AM, yasuhisa umano wrote:
Initialization of r8a66597 info structure is not enough.
Because initilization was used size of pointer.
This fixes that use size of r8a6659 info structure.
Sig
Initialization of r8a66597 info structure is not enough.
Because initilization was used size of pointer.
This fixes that use size of r8a6659 info structure.
Signed-off-by: Yasuhisa Umano
---
v2 : Change from sizeof(struct r8a66597) to sizeof(*r8a66597)
drivers/usb/host/r8a66597-hcd.c |2 +-
This driver is processed as two USB hub despite one.
The number of root hub is defined in R8A66597_MAX_ROOT_HUB.
This fixes that register is accessed by using the definition
of R8A66597_MAX_ROOT_HUB.
Signed-off-by: Yasuhisa Umano
---
v2 : No changes
drivers/usb/host/r8a66597-hcd.c |4 ++--
On Thu, Apr 17, 2014 at 4:44 AM, Stefano Babic wrote:
> Hi Igor, hi Tim
>
> On 17/04/2014 13:22, Igor Grinberg wrote:
>
>>
>> get_ram_size() works on cm-fx6 all DRAM configurations.
>
> As on most boards in mainline ;-)
>
It looks like I mis-interpreted the failure. This issue is that
get_ram_siz
Hi ,
I am using an 8 port switch (MV88E6131) in our customized board with P2020
Processor.
Following is the set up in our board,
Port 6 -> CPU port
Port0 / Port1 / Port2 connected to phy
Port3 -> No connection
Port 4 / Port 5 connected to DSP's
Port 7 routed to back plane , SGMII connection.
Hello Wolfgang,
Le 17/04/2014 21:56, Wolfgang Denk a écrit :
Dear Pierre Aubert,
In message <1397747435-24042-3-git-send-email-p.aub...@staubli.com> you wrote:
This sub-command adds support for the RPMB partition of an eMMC:
* mmc rpmb key
Programs the authentication key in the eMMC This k
67 matches
Mail list logo
