Hi , I am using an 8 port switch (MV88E6131) in our customized board with P2020 Processor.
Following is the set up in our board, Port 6 -> CPU port Port0 / Port1 / Port2 connected to phy Port3 -> No connection Port 4 / Port 5 connected to DSP's Port 7 routed to back plane , SGMII connection. I tried grouping port0,port1,port2 as one LAN-A and Port 4,5,7 as LANB. Such that both LAN A and B cannot communicate with each other , but both can send frame to CPU PORT. After this i got stuck and dono how to proceed further and test it. Please guide me in this to solve. -- View this message in context: http://u-boot.10912.n7.nabble.com/How-to-test-vlan-in-u-boot-tp178161.html Sent from the U-Boot mailing list archive at Nabble.com. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
