Dear alfred steele,
In message <528f13590906071928m77903d07x2d238a3c1dae4...@mail.gmail.com> you
wrote:
>
> I have a requirement fro initializing the GPIO pin for interrupt on
> a custom FPGA on the MX31 board. Where should i add this code in the
> uboot tree.
It depends a bit on if there ar
This patch adds a NAND driver for the Marvell Kirkwood SoC's.
Acked-by: Stefan Roese
Signed-off-by: Prafulla Wadaskar
---
Change log:
v2: updated as per feedback for v1 (cosmetic change)
drivers/mtd/nand/Makefile|1 +
drivers/mtd/nand/kirkwood_nand.c | 81
Reference:
http://plugcomputer.org/
http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support
This patch is tested for-
1. Boot from DRAM/NAND flash
2. File transfer using tftp
3. NAND flash read/write/erase
4. Linux kernel and RFS Boot from NAND
Signed-off-by: Prafulla Wadaskar
---
Change
This patch adds a egiga driver for the Marvell Kirkwood SoC's.
Contributors:
Yotam Admon
Michael Blostein
Acked-by: Stefan Rose
Signed-off-by: Prafulla Wadaskar
---
Change log:
v2: updated all print messages to provide helpful info
v3: No link dectection bug fixed
drivers/net/Makefile
On Monday 08 June 2009 00:22:25 Prafulla Wadaskar wrote:
> Hi Mike
please stop top posting in your replies
> With reference to
> http://lists.denx.de/pipermail/u-boot/2009-April/050670.html
>
> Hopefully you are in process to send pull request for u-boot-backfin.git
> (sf branch) to get SF stuff
Dear Mike,
In message <200906080319.25556.vap...@gentoo.org> you wrote:
>
> > With reference to
> > http://lists.denx.de/pipermail/u-boot/2009-April/050670.html
> >
> > Hopefully you are in process to send pull request for u-boot-backfin.git
> > (sf branch) to get SF stuff in, If not May you pleas
This is needed for the upcoming esd MECP5123 board port which uses I2C EEPROM
for environment storage.
Signed-off-by: Stefan Roese
Cc: Reinhard Arlt
---
cpu/mpc512x/i2c.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/cpu/mpc512x/i2c.c b/cpu/mpc512x/i2c.c
index 97bda0
MECP5123 is a MPC5121E based module by esd gmbh.
Signed-off-by: Stefan Roese
Cc: Reinhard Arlt
---
MAINTAINERS |1 +
MAKEALL |1 +
Makefile |3 +
board/esd/mecp5123/Makefile | 50 +
board/esd/mecp5123/config.mk |
This patch adds NAND Flash Controller driver for MPC5121 revision 2.
All device features, except hardware ECC and power management, are
supported.
This NFC driver replaces the one orignally posted by John Rigby:
"[PATCH] Freescale NFC NAND driver"
It's a port of the Linux driver version posted b
So that we can set the NAND loader's relocate stack pointer
to the value other than the relocate address + 0x1.
Signed-off-by: Mingkai Hu
---
board/freescale/mpc8313erdb/mpc8313erdb.c |2 +-
board/sheldon/simpc8313/simpc8313.c |2 +-
include/configs/MPC8313ERDB.h |
The following changes since commit 48716e55b684927f5b33b2f9ac890e35309a1de4:
Stefan Roese (1):
mpc512x: Use serial_setbrg() in serial_init() to not duplicate the code
are available in the git repository at for the "next" branch:
git://www.denx.de/git/u-boot-blackfin.git sf
Prafulla W
Hi
i am in the process of upgrading the u-boot version from u-boot 1.1.6 to
1.3.0 and im stuck up with the usb.
this is the error im getting
=> usb start
(Re)start USB...
USB: ACTUAL Board
Setting Clock...
PHY Invalid
Clock setting failed
Error, couldn't init Lowlevel part
i have no idea wat h
Dear Stefan Roese,
In message <126687-11316-1-git-send-email...@denx.de> you wrote:
> This is needed for the upcoming esd MECP5123 board port which uses I2C EEPROM
> for environment storage.
Stefan, please check if this is really what you want to do.
Environmentin EEPROM is *strongl
Dear Stefan Roese,
In message <127665-14264-1-git-send-email...@denx.de> you wrote:
> MECP5123 is a MPC5121E based module by esd gmbh.
>
> Signed-off-by: Stefan Roese
> Cc: Reinhard Arlt
...
> +int eeprom_write_enable(unsigned dev_addr, int state)
> +{
> + volatile immap_t *im = (immap
Dear Stefan Roese,
In message <127475-13692-1-git-send-email...@denx.de> you wrote:
> This patch adds NAND Flash Controller driver for MPC5121 revision 2.
> All device features, except hardware ECC and power management, are
> supported.
>
> This NFC driver replaces the one orignally posted by
Hello Wolfgang,
Wolfgang Denk wrote:
> Dear Stefan Roese,
>
> In message <126687-11316-1-git-send-email...@denx.de> you wrote:
>> This is needed for the upcoming esd MECP5123 board port which uses I2C EEPROM
>> for environment storage.
>
> Stefan, please check if this is really what y
Monday 08 June 2009 09:51:15 Stefan Roese wrote:
> This patch adds NAND Flash Controller driver for MPC5121 revision 2.
> All device features, except hardware ECC and power management, are
> supported.
>
> This NFC driver replaces the one orignally posted by John Rigby:
>
> "[PATCH] Freescale NFC N
Is this patch ready for merging? Is there anything else I need to do?
On Mon, Jun 1, 2009 at 2:51 PM, Jon Smirl wrote:
> Add support for the Phytec phyCORE-MPC5200B-tiny. Code originally from
> Pengutronix.de.
> Added MAKEALL and MAINTAINER entry per last posting.
>
> Signed-off-by: Jon Smirl
>
Hi
> applied to arm/next
thanks!
But what about rest of the patchset?
best regards,
Matthias
--
Matthias Ludwig, Software Development
Ultratronik Entwicklungs GmbH, Gewerbestrasse 52, 82211 Herrsching, Germany
http://www.ultratronik.de Tel: +49 8152 3709-356 Fax: +49 8152 5183
Registergerich
The update consists of following changes:
- remove configuration of not connected pins, effectively
leaving them in safe mode.
- remove unused GPIOs, setup newly added ones.
- setup pulls for various GPIOs. Disable pulls for game
buttons, as they have external pulls.
- SDRC CS change based on r
Hi Fabio,
Fabio Estevam wrote:
>> Uh... I think the hardware is pretty the same as that is
>> handled by
>> mcffec.c driver but merging won't be very easy...
>>
>
> There are other i.MX processors with FEC.
Uh... I didn't know that... As far as I can see Linux driver supports
only i.MX27...
2008 Edition Contact List of Dentists in the USA
++ 164,285 D.entists with City, State, Zip
++ 158,040 Postal Addresses
++ 163,342 Phone Nos
++ 77,621 Fax Numbers
++ 45,754 Email Addys
Only until the end of the week - Jun 12 we have lowered the price to $294 - a
$100 savings!
To inquire plea
Ben,
You missed this:
Date: Jun 1
[U-Boot] [PATCH] Standardize the use of MCFFEC_TOUT_LOOP as a udelay(1)
loop counter
Best Regards,
TsiChung
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de]
On Behalf Of Ben Warren
Sent: Sunday, June 07, 2009
Wolfgang,
Have you checked your board/Your_platform/u-boot.lds?
Regards,
TsiChung
On Thu, Jun 4, 2009 at 10:06 AM, Wolfgang Wegner wrote:
> Hi,
>
> sorry I can not provide a solution, but when trying to migrate my
> board to newer U-Boot I realised that the dependency calculation
> is not correc
Richard,
Nack. It is already existed in asm-m68k/coldfire/eport.h
Regards,
TsiChung
On Fri, Jun 5, 2009 at 4:12 PM, Richard
Retanubun wrote:
> From edb2947e95dc8dc1c91bc952002304267d02639f Mon Sep 17 00:00:00 2001
> From: Richard Retanubun
> Date: Fri, 5 Jun 2009 15:54:56 -0400
> Subject: [PAT
Sorry, was on vacation. Copying a couple mailing lists...
On Tue, 2009-06-02 at 12:34 +0300, Avi Kivity wrote:
> I am now doing regular build tests on various platforms (kernel only for
> now).
That's great! Much appreciated.
> But ppc wants a mkimage and I don't have one to give it. Where
>
On Fri, 5 Jun 2009 19:31:06 -0700 (PDT)
d...@ovro.caltech.edu wrote:
> The bit setting did not help with our errors at
> 1Gbit, so the comment:
fixed and pushed onto mpc83xx master. regenerated patch below.
thanks for the clarification David.
Kim
mpc83xx: don't set SICRH_TSOBI1 to RMII/RTBI op
Hi Grzegorz,
> Signed-off-by: Grzegorz Bernacki
> ---
> board/digsy_mtc/digsy_mtc.c | 14 ++
> include/configs/digsy_mtc.h |7 +++
> 2 files changed, 21 insertions(+), 0 deletions(-)
>
> diff --git a/board/digsy_mtc/digsy_mtc.c b/board/digsy_mtc/digsy_mtc.c
> index 83d5864.
Hi Grzegorz,
> Signed-off-by: Grzegorz Bernacki
> ---
> drivers/spi/Makefile |1 +
> drivers/spi/mpc52xx_spi.c | 108
> +
> include/mpc5xxx.h | 18 +++
> 3 files changed, 127 insertions(+), 0 deletions(-)
> create mode 100644
Hollis Blanchard wrote:
>> But ppc wants a mkimage and I don't have one to give it. Where
>> can I find it?
>>
>
> mkimage is a tool provided by u-boot
> (http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=summary). IIRC
> people have discussed the need to include a copy in the kernel sour
Hi Grzegorz,
> New command allows to:
> o check FW version
> o set LED status
> o set digital output status
> o get digital input status
>
> Signed-off-by: Grzegorz Bernacki
> ---
> board/digsy_mtc/Makefile |2 +-
> board/digsy_mtc/cmd_mtc.c | 287
> +++
On Monday 08 June 2009 12:33:01 Heiko Schocher wrote:
> >> This is needed for the upcoming esd MECP5123 board port which uses I2C
> >> EEPROM for environment storage.
> >
> > Stefan, please check if this is really what you want to do.
> > Environmentin EEPROM is *strongly* discouraged. It
Hi all,
Over the weekend we performed some hardware modifications
on our boards with their troublesome gigabit interfaces.
We performed a couple of tests, one of which may be
the solution to our problem.
1) Modified the value of the series termination of EC_GTX_CLK125
The PHY drives a 125MH
Hi Wolfgang,
On Monday 08 June 2009 12:25:01 Wolfgang Denk wrote:
> > This is needed for the upcoming esd MECP5123 board port which uses I2C
> > EEPROM for environment storage.
>
> Stefan, please check if this is really what you want to do.
> Environmentin EEPROM is *strongly* discourage
Hi Wolfgang,
On Monday 08 June 2009 12:41:35 Wolfgang Denk wrote:
> > This patch adds NAND Flash Controller driver for MPC5121 revision 2.
> > All device features, except hardware ECC and power management, are
> > supported.
> >
> > This NFC driver replaces the one orignally posted by John Rigby:
On Monday 08 June 2009 12:54:45 Piotr Zięcik wrote:
> Monday 08 June 2009 09:51:15 Stefan Roese wrote:
> > This patch adds NAND Flash Controller driver for MPC5121 revision 2.
> > All device features, except hardware ECC and power management, are
> > supported.
> >
> > This NFC driver replaces the
On Mon, Jun 08, 2009 at 10:48:58AM -0500, Hollis Blanchard wrote:
>Sorry, was on vacation. Copying a couple mailing lists...
>
>On Tue, 2009-06-02 at 12:34 +0300, Avi Kivity wrote:
>> I am now doing regular build tests on various platforms (kernel only for
>> now).
>
>That's great! Much appreciate
Hi Wolfgang,
On Monday 08 June 2009 12:38:18 Wolfgang Denk wrote:
> > +int eeprom_write_enable(unsigned dev_addr, int state)
> > +{
> > + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
> > +
> > +if (dev_addr != CONFIG_SYS_I2C_EEPROM_ADDR)
> > + return -1;
> > +
> > +
Dear Stefan Roese,
In message <200906081848.50593...@denx.de> you wrote:
>
> I know that EEPROM has some disadvantages. But this is not my choice but the
> customers (esd) decision. esd has used I2C EEPROM for environment storage for
> a long time and even included write-protection to the EEPRO
Dear Stefan Roese,
In message <200906081900.52451...@denx.de> you wrote:
>
> > I do not see ADS5121 support in posted driver code. ADS5121 board controls
> > NAND chip selects via external CPLD and do not use controller chip select
> > signals. Linux driver has workaround for this special case.
>
Dear Stefan,
In message <200906081937.02354...@denx.de> you wrote:
>
> > > + out_be32(&im->mddrc.lut_table4_alternate_upper,
> > > CONFIG_SYS_MDDRCGRP_LUT4_AU);
> > > + out_be32(&im->mddrc.lut_table4_alternate_lower,
> > > CONFIG_SYS_MDDRCGRP_LUT4_AL);
> >
> > Lines too long.
>
> OK. Some is tru
On Monday 08 June 2009 20:08:21 Wolfgang Denk wrote:
> > > I do not see ADS5121 support in posted driver code. ADS5121 board
> > > controls NAND chip selects via external CPLD and do not use controller
> > > chip select signals. Linux driver has workaround for this special case.
> >
> > Yes, I know
Hi TsiChung,
On Mon, Jun 08, 2009 at 09:28:35AM -0500, TC Liew wrote:
> Wolfgang,
>
> Have you checked your board/Your_platform/u-boot.lds?
basically my u-boot.lds is a copy from m5329evb, minus some things
that I do not need (e.g. env_embedded.o) and some things I do not
really remember why I d
Stephan,
Are you able to read the second half of the NAND? The NAND package on the
ADS contains two chips with two separate chip selects. Without the chip
select code you will likely only see 512M instead of 1G.
John
On Mon, Jun 8, 2009 at 12:24 PM, Stefan Roese wrote:
> On Monday 08 June 20
Hi,
2009/6/7 Jean-Christophe PLAGNIOL-VILLARD :
> global inline function need to be define in a header
Agreed, but I have a few small remarks below
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
> ---
> common/usb.c | 10 --
> include/usb.h | 6 ++
> 2 files changed, 6 ins
The following changes since commit
48716e55b684927f5b33b2f9ac890e35309a1de4:
Stefan Roese (1):
mpc512x: Use serial_setbrg() in serial_init() to not duplicate
the code
are available in the git repository at:
git://git.denx.de/u-boot-usb.git next
Remy Bohmer (2):
Integrate USB ga
Greetings,
I currently have blob working nicely on the flashboard in question, Ive been
trying to create a patchset to get it working on u-boot.
I basicly want feedback if this is enough or what else is needed. The code
is heavily copied from assabet since they are similiar.
diff --git a/board/j
Dear Stefan,
In message <200906082024.25415...@denx.de> you wrote:
>
> Did you actually see the code? Did you see the board specific code added to
> the "common" NFC driver code? This is not really something I like to see in
> common drivers. And such code usually get's a NAK from you as well.
Hi Ilya,
--- On Mon, 6/8/09, Ilya Yanok wrote:
> > There are other i.MX processors with FEC.
>
> Uh... I didn't know that... As far as I can see Linux
> driver supports
> only i.MX27...
Yes, only MX27 so far. MX35 also has a FEC.
I sent this patch to the netdev list in order to add MX35 FEC
Dear Ben Warren,
In message <4a2c9343.20...@gmail.com> you wrote:
>
> The following changes since commit 3bc8556f9b24af60dba2b55a0abb1182dff45ecc:
> Wolfgang Denk (1):
> Merge branch 'master' of git://git.denx.de/u-boot-mmc
>
> are available in the git repository at:
>
> git://git.de
Dear Mike Frysinger,
In message <129323-30525-1-git-send-email-vap...@gentoo.org> you wrote:
> The following changes since commit 48716e55b684927f5b33b2f9ac890e35309a1de4:
> Stefan Roese (1):
> mpc512x: Use serial_setbrg() in serial_init() to not duplicate the
> code
>
> are availa
Wolfgang Denk wrote:
> Dear Ben Warren,
>
> In message <4a2c9343.20...@gmail.com> you wrote:
>
>> The following changes since commit 3bc8556f9b24af60dba2b55a0abb1182dff45ecc:
>> Wolfgang Denk (1):
>> Merge branch 'master' of git://git.denx.de/u-boot-mmc
>>
>> are available in the git r
Dear Remy Bohmer,
In message <3efb10970906081215v5f3e9f25g5ab1c3c28ec1a...@mail.gmail.com> you
wrote:
> The following changes since commit
> 48716e55b684927f5b33b2f9ac890e35309a1de4:
> Stefan Roese (1):
> mpc512x: Use serial_setbrg() in serial_init() to not duplicate
> the code
>
> are
> Over the weekend we performed some hardware modifications
> on our boards with their troublesome gigabit interfaces.
>
> We performed a couple of tests, one of which may be
> the solution to our problem.
>
> 1) Modified the value of the series termination of EC_GTX_CLK125
>
> The PHY drive
On Mon, 8 Jun 2009 15:32:54 +0530
Deepak Gopalakrishnan wrote:
> Hi
> i am in the process of upgrading the u-boot version from u-boot 1.1.6 to
> 1.3.0 and im stuck up with the usb.
> this is the error im getting
>
> => usb start
> (Re)start USB...
> USB: ACTUAL Board
> Setting Clock...
> PHY
Hi Dave,
>> I'm not ready to claim success, as I need to make the
>> change on other boards ... but its very encouraging!
>
> Good news, Dave.
> Sure, we need to keep the impedance matching.
> change the series resister.
> Anyway, I strong recommand you to check if the signal
> of GMII in
Wolfgang,
Wolfgang Denk wrote:
> Dear Ben Warren,
>
> In message <4a2c9343.20...@gmail.com> you wrote:
>
>> The following changes since commit 3bc8556f9b24af60dba2b55a0abb1182dff45ecc:
>> Wolfgang Denk (1):
>> Merge branch 'master' of git://git.denx.de/u-boot-mmc
>>
>> are available i
The following changes since commit 2c0234fa79122a5aa77c4e17c33eb2fe184b61a7:
Daniel Mack (1):
smc911x: write back the manually set MAC address
are available in the git repository at:
git://git.denx.de/u-boot-net master
Felix Radensky (1):
ppc4xx/net: Fix MDIO clock setup
Manik
58 matches
Mail list logo
