Dear "Rajeesh.R",
In message <1277210435.11717.32.ca...@localhost.localdomain> you wrote:
>
> I am work with AT91rm9200dk board
> AT49BV642DT flash is using for keep uboot .
> In uboot which file and where the is the flash mode selection ie botom
> boot or top boot flash selection is spec
I think the flash is at 0x1000. Do you have a Jlink or SAM-ICE with you. If
yes you can put the uboot.bin that is generated once you crosss compile the
uboot at 0x1000 and then set BMS pin low at the power up.
This will give you uboot prompt as controller bootm from external.
Regard
2 matches
Mail list logo
