Dear "Rajeesh.R",
In message <1277210435.11717.32.ca...@localhost.localdomain> you wrote:
>
> I am work with AT91rm9200dk board
> AT49BV642DT flash is using for keep uboot .
> In uboot which file and where the is the flash mode selection ie botom
> boot or top boot flash selection is specifying. Or how can I configure
> this flash in Uboot .
This is the output of a "flinfo" ommnd running on the DK board:
U-Boot> flinfo
DataFlash:AT45DB642
Nb pages: 8192
Page Size: 1056
Size= 8650752 bytes
Logical address: 0xC0000000
Area 0: C0000000 to C00041FF (RO) Bootstrap
Area 1: C0004200 to C00083FF Environment
Area 2: C0008400 to C0041FFF (RO) U-Boot
Area 3: C0042000 to C0251FFF Kernel
Area 4: C0252000 to C083FFFF FS
Bank # 1: Atmel: AT49BV1614A (16Mbit)
Size: 2 MB in 39 Sectors
Sector Start Addresses:
10000000 (RO) 10002000 (RO) 10004000 (RO) 10006000 (RO) 10008000 (RO)
1000A000 (RO) 1000C000 (RO) 1000E000 (RO) 10010000 (RO) 10020000 (RO)
10030000 (RO) 10040000 (RO) 10050000 (RO) 10060000 (RO) 10070000
10080000 10090000 100A0000 100B0000 100C0000
100D0000 100E0000 100F0000 10100000 10110000
10120000 10130000 10140000 10150000 10160000
10170000 10180000 10190000 101A0000 101B0000
101C0000 101D0000 101E0000 101F0000
The U-Boot code sits at the beginning of the NOR flash, starting at
0x10000000
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
Just because your doctor has a name for your condition doesn't mean
he knows what it is.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
