Am 03.07.2013 16:33, schrieb Fabio Estevam:
On Wed, Jul 3, 2013 at 11:20 AM, Matthias Weißer wrote:
Yes. Thanks a lot. But why is that? Can you give me an explanation for that
or point me to the correct documentation?
Does it boot now?
Yes, it does. And the output changed to
[0.00
On Wed, Jul 3, 2013 at 11:20 AM, Matthias Weißer wrote:
> Yes. Thanks a lot. But why is that? Can you give me an explanation for that
> or point me to the correct documentation?
Does it boot now?
I think you got "Generic DT based system" because your original entry
"fsl,zmx25" is not valid.
Th
Am 03.07.2013 13:25, schrieb Fabio Estevam:
The "Generic DT based system" is not usual.
Sure. It is based on imx25-pdk.dts minus nand plus uart2 which is used as
debug uart on the system in question.
/dts-v1/;
#include "imx25.dtsi"
/ {
model = "Graf-Syteco zmx25";
compatible
Hi Matthias,
On Wed, Jul 3, 2013 at 3:20 AM, Matthias Weißer wrote:
> Isn't that supossed to be the right output for a DT kernel?
We usually get something like (for a mx6qsabrelite board - I do not
have my mx25pdk handy):
Machine: Freescale i.MX6 Quad/DualLite (Device Tree), model: Freescale
i
Am 03.07.2013 03:16, schrieb Fabio Estevam:
On Tue, Jul 2, 2013 at 12:26 PM, Matthias Weißer wrote:
Hi
I try to boot a current 3.11 kernel on a custom iMX25 board using DT. u-boot
starts the kernel but it stops working just after the first eralyprintk
lines are out. The u-boot/kernel output:
On Tue, Jul 2, 2013 at 12:26 PM, Matthias Weißer wrote:
> Hi
>
> I try to boot a current 3.11 kernel on a custom iMX25 board using DT. u-boot
> starts the kernel but it stops working just after the first eralyprintk
> lines are out. The u-boot/kernel output:
>
> bootm 0x8100 - 0x8080
> ##
Hi Matthias,
Am 02/07/2013 17:26, schrieb Matthias Weißer:
> Hi
>
> I try to boot a current 3.11 kernel on a custom iMX25 board using DT.
> u-boot starts the kernel but it stops working just after the first
> eralyprintk lines are out. The u-boot/kernel output:
>
> bootm 0x8100 - 0x8080
Hi
I try to boot a current 3.11 kernel on a custom iMX25 board using DT.
u-boot starts the kernel but it stops working just after the first
eralyprintk lines are out. The u-boot/kernel output:
bootm 0x8100 - 0x8080
## Booting kernel from Legacy Image at 8100 ...
Image Name: L
8 matches
Mail list logo
