Hi Matthias,
On Wed, Jul 3, 2013 at 3:20 AM, Matthias Weißer <weiss...@arcor.de> wrote:
> Isn't that supossed to be the right output for a DT kernel?
We usually get something like (for a mx6qsabrelite board - I do not
have my mx25pdk handy):
Machine: Freescale i.MX6 Quad/DualLite (Device Tree), model: Freescale
i.MX6 Quad SABRE Lite Board
The "Generic DT based system" is not usual.
> Sure. It is based on imx25-pdk.dts minus nand plus uart2 which is used as
> debug uart on the system in question.
>
> /dts-v1/;
> #include "imx25.dtsi"
>
> / {
> model = "Graf-Syteco zmx25";
> compatible = "fsl,zmx25", "fsl,zmx25";
Ah, this should be:
compatible = "graf,imx25-zmx25", "fsl,imx25"; (There is no valid match
against fsl,zmx25)
Then your dts file should be called 'imx25-zmx25.dts'
Hope this helps.
Regards,
Fabio Estevam
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
