2015-02-21 16:33 GMT+01:00 Fabio Estevam :
>
> Excellent! We currently configure it for DDR2.
>
> It would be nice if you could submit a patch adding your board to
> U-boot so that we could have mx28_mem_init capable of initializing
> mDDR as well.
Hi Fabio,
I just submitted a patch, I hope it is
Hi Marco,
On Sat, Feb 21, 2015 at 1:22 PM, Marco Cavallini
wrote:
> Hi Fabio,
> please apologize if I inadvertently sent the reply only to you.
>
> I solved the problem setting in mx28_mem_init() the mDDR PINCTRLs
Excellent! We currently configure it for DDR2.
It would be nice if you could sub
2015-02-21 15:00 GMT+01:00 Fabio Estevam :
> Hi Marco,
>
> [Please keep the list on Cc.]
>
>
> On Sat, Feb 21, 2015 at 11:13 AM, Marco Cavallini
> wrote:
>
>> Hi Fabio,
>> I moved to u-boot GIT master today (21 Feb 2015)
>> I set up my DDR settings, defined the following:
>> #define CONFIG_SPL_SER
Hi Marco,
[Please keep the list on Cc.]
On Sat, Feb 21, 2015 at 11:13 AM, Marco Cavallini
wrote:
> Hi Fabio,
> I moved to u-boot GIT master today (21 Feb 2015)
> I set up my DDR settings, defined the following:
> #define CONFIG_SPL_SERIAL_SUPPORT
> #define CONFIG_SYS_MXS_VDD5V_ONLY
> #define D
Hi Marco,
On Fri, Feb 13, 2015 at 5:08 PM, Fabio Estevam wrote:
> You could try this patch to have debug output from SPL:
> http://git.denx.de/?p=u-boot.git;a=commitdiff;h=950eaf6230496585e72ebb965c458d35c6c7eac1;hp=e8cdeefc222ff32a80282dd571be0426156cd9d9
>
> Make sure you have DEBUG and CONFIG
On Fri, Feb 13, 2015 at 8:16 AM, Marco Cavallini
wrote:
> I have already studied this useful document
> http://www.denx.de/wiki/pub/U-Boot/MiniSummitELCE2013/2013-u-boot-mxs-without-fsl-tools.pdf
>
> I do not need any encryption.
> I did exactly the same as explained here
> http://www.denx-cs.de/
2015-02-12 16:57 GMT+01:00 Marco
> Hi,
> On a custom i.MX28 board I am using u-boot-2015.01.
> The debug port DUART is not the same as i.MX28, so I changed these
> settings in iomux.c:
>
> const iomux_cfg_t iomux_setup[] = {
> /* DUART */
> // MX28_PAD_PWM0__DUART_RX,
> // MX28_PAD_PWM1__DUART_TX
Hi,
On a custom i.MX28 board I am using u-boot-2015.01.
The debug port DUART is not the same as i.MX28, so I changed these
settings in iomux.c:
const iomux_cfg_t iomux_setup[] = {
/* DUART */
// MX28_PAD_PWM0__DUART_RX,
// MX28_PAD_PWM1__DUART_TX,
/* DUART */
/* Unconfigure BOOT ROM default
8 matches
Mail list logo
