Hi Marco, On Fri, Feb 13, 2015 at 5:08 PM, Fabio Estevam <feste...@gmail.com> wrote:
> You could try this patch to have debug output from SPL: > http://git.denx.de/?p=u-boot.git;a=commitdiff;h=950eaf6230496585e72ebb965c458d35c6c7eac1;hp=e8cdeefc222ff32a80282dd571be0426156cd9d9 > > Make sure you have DEBUG and CONFIG_SPL_SERIAL_SUPPORT enabled. > > Also, double check the DDR initialization for your board. Another thing you should check if is if you need this patch for your board: http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commitdiff;h=7a086037071401ee781425c382846dddfe80df68;hp=950eaf6230496585e72ebb965c458d35c6c7eac1 ,and then define CONFIG_SYS_MXS_VDD5V_ONLY on your board config file. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
