Dear Jim Lin,
> >From: Marek Vasut [mailto:marek.va...@gmail.com]
> >Sent: Thursday, June 21, 2012 6:16 PM
> >
> >> --- a/drivers/usb/host/ehci-tegra.c
> >> +++ b/drivers/usb/host/ehci-tegra.c
> >> @@ -1,5 +1,5 @@
> >>
> >> /*
> >>
> >> - * Copyright (c) 2009 NVIDIA Corporation
> >> + * Copyrig
>From: Marek Vasut [mailto:marek.va...@gmail.com]
>Sent: Thursday, June 21, 2012 6:16 PM
>> --- a/drivers/usb/host/ehci-tegra.c
>> +++ b/drivers/usb/host/ehci-tegra.c
>> @@ -1,5 +1,5 @@
>> /*
>> - * Copyright (c) 2009 NVIDIA Corporation
>> + * Copyright (c) 2009-2012 NVIDIA Corporation
>> *
>>
Dear Jim Lin,
> A known hardware issue of USB1 port where bit 1 (connect status
> change) of PORTSC register will be set after issuing Port Reset
> (like "usb reset" in u-boot command line).
> This will be treated as an error and stops later device enumeration.
>
> Therefore we clear that bit aft
On 06/20/2012 09:24 PM, Jim Lin wrote:
> A known hardware issue of USB1 port where bit 1 (connect status
> change) of PORTSC register will be set after issuing Port Reset
> (like "usb reset" in u-boot command line).
> This will be treated as an error and stops later device enumeration.
>
> Therefo
A known hardware issue of USB1 port where bit 1 (connect status
change) of PORTSC register will be set after issuing Port Reset
(like "usb reset" in u-boot command line).
This will be treated as an error and stops later device enumeration.
Therefore we clear that bit after Port Reset in order to p
5 matches
Mail list logo