Hi, York,
All the boards are required to set to Intel mode. If it’s not
in Intel mode, VID is not support.
I have a look how to do.
Thanks.
From: york sun
Sent: Thursday, January 21, 2016 10:53 AM
To: Ying Zhang; ying.zh...@freescale.com; u-boot@li
Hi, York,
I know this issue. It's occurred because the IR chip on T4RDB worked on
AMD mode, it can work well on INTEL mode.
Nexcom will collect all the boards and set the IR chip to INTEL mode.
Before that, What should we do?
Thanks.
-Original Messag
Can software detect IR mode and support both? Or skip the vid part if the mode
is not supported?
York
Original Message
From: Ying Zhang
Sent: Wednesday, January 20, 2016 06:05 PM
To: york sun ,ying.zh...@freescale.com,u-boot@lists.denx.de
Subject: RE: [PATCH] board/t4240rdb:
On 01/20/2016 02:26 PM, york@nxp.com wrote:
> Ying,
>
> This patch looks OK but the board doesn't work. I traced the code to the first
> setting voltage. The VID has 1025mV and current voltage is 1047mV. As soon as
> the code drops voltage by one step, the board hangs. Please double check i
On 12/09/2015 11:00 PM, ying.zh...@freescale.com wrote:
> From: Ying Zhang
>
> The fuse status register provides the values from on-chip
> voltage ID efuses programmed at the factory.
> These values define the voltage requirements for
> the chip. u-boot reads FUSESR and translates the values
> in
From: Ying Zhang
The fuse status register provides the values from on-chip
voltage ID efuses programmed at the factory.
These values define the voltage requirements for
the chip. u-boot reads FUSESR and translates the values
into the appropriate commands to set the voltage output
value of an exte
6 matches
Mail list logo
