On 01/20/2016 02:26 PM, york....@nxp.com wrote: <snip>
> Ying, > > This patch looks OK but the board doesn't work. I traced the code to the first > setting voltage. The VID has 1025mV and current voltage is 1047mV. As soon as > the code drops voltage by one step, the board hangs. Please double check if > the > voltage setting is correct. You can measure it on the board to confirm. > I tested it on top of b57843e68804c2d53d2cff2b8b2238e37b388faa, with two boards. The result is the same. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
