Hu Mingkai-B21284 wrote:
>
>
>> I've tested another USB stick with this board, and was
>> recognized properly.
>> Also, the problematic stick works fine with Linux, so I still
>> suspect there's a problem in u-boot EHCI driver. Can you
>> test your board with smaller/older devices, the one
Wolfgang Denk wrote:
> Dear Felix Radensky,
>
> In message <4aaf46b4.7030...@embedded-sol.com> you wrote:
>
>> Hu Mingkai-B21284 wrote:
>>
>
> [Full quote deleted]
>
>
> Hey, eveybody on this thread: could you *please* stop full-quoting?
> Please read http://www.netmeister.org/news/learn2qu
Dear Felix Radensky,
In message <4aaf46b4.7030...@embedded-sol.com> you wrote:
> Hu Mingkai-B21284 wrote:
[Full quote deleted]
Hey, eveybody on this thread: could you *please* stop full-quoting?
Please read http://www.netmeister.org/news/learn2quote.html
...
> I've tested another USB stick wit
-Boot] [PATCH] Enable usb ehci support for
> p2020ds board
>
> > And the CPU version you used is 1.0, so your board version
> should less
> > than B2.
> > I'm not sure whether this affects the results.
> >
>
> I've tested another USB stick wi
U-Boot-Denx; Zhang Junjie-B18070; Kumar Gala
>> Subject: Re: [U-Boot] [PATCH] Enable usb ehci support for
>> p2020ds board
>>
>> Hi,
>>
>> This is what I get on MPC8536DS:
>>
>> U-Boot 2009.08-rc3 (Aug 26 2009 - 18:18:31)
>>
>> C
> -Original Message-
> From: Wolfgang Denk [mailto:w...@denx.de]
> Sent: Tuesday, September 15, 2009 2:55 AM
> To: Zang Roy-R61911
> Cc: Felix Radensky; U-Boot-Denx; Zhang Junjie-B18070; Kumar Gala
> Subject: Re: [U-Boot] [PATCH] Enable usb ehci support for
> p2
> -Original Message-
> From: u-boot-boun...@lists.denx.de
> [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Felix Radensky
> Sent: Monday, September 14, 2009 3:50 PM
> To: Zang Roy-R61911
> Cc: U-Boot-Denx; Zhang Junjie-B18070; Kumar Gala
> Subject: Re: [U-Boo
Dear "Zang Roy-R61911",
In message
<7df0af56456b8f4081e3c44ccce311de5a3...@zch01exm23.fsl.freescale.net> you wrote:
>
> > => usb start
> > (Re)start USB...
> > USB: Register 10011 NbrPorts 1
> > USB EHCI 1.00
> > scanning bus for devices... 2 USB Device(s) found
> >scanning bus for st
Dear Felix Radensky,
In message <4aadfbc6.4080...@embedded-sol.com> you wrote:
>
...
> I think "usb start" and "usb reset" are identical, but anyway:
Yes, they are.
> => usb start
> (Re)start USB...
> USB: Register 10011 NbrPorts 1
> USB EHCI 1.00
> scanning bus for devices... 2 USB Device(s)
Dear "Zang Roy-R61911",
In message
<7df0af56456b8f4081e3c44ccce311de5a3...@zch01exm23.fsl.freescale.net> you wrote:
>
...
> You need to run
> => usb start
> to start usb, then run
> => usb dev 0
> to specify the device, then run
This should not be needed...
> => ext2ls usb 0:1
> to ls the sda
> -Original Message-
> From: Felix Radensky [mailto:fe...@embedded-sol.com]
> Sent: Monday, September 14, 2009 16:16 PM
> To: Zang Roy-R61911
> Cc: U-Boot-Denx; Kumar Gala; Zhang Junjie-B18070
> Subject: Re: [U-Boot] [PATCH] Enable usb ehci support for
> p2020d
sky [mailto:fe...@embedded-sol.com]
>>>> Sent: Sunday, September 13, 2009 17:19 PM
>>>> To: Zang Roy-R61911
>>>> Cc: U-Boot-Denx; Kumar Gala
>>>> Subject: Re: [U-Boot] [PATCH] Enable usb ehci support for
>>>> p2020ds board
>>>>
>&g
> -Original Message-
> From: Felix Radensky [mailto:fe...@embedded-sol.com]
> Sent: Monday, September 14, 2009 15:50 PM
> To: Zang Roy-R61911
> Cc: U-Boot-Denx; Kumar Gala; Zhang Junjie-B18070
> Subject: Re: [U-Boot] [PATCH] Enable usb ehci support for
>
Hi,
Zang Roy-R61911 wrote:
>
>
>
>> -Original Message-
>> From: Felix Radensky [mailto:fe...@embedded-sol.com]
>> Sent: Sunday, September 13, 2009 17:19 PM
>> To: Zang Roy-R61911
>> Cc: U-Boot-Denx; Kumar Gala
>> Subject: Re: [U-Boot] [P
> -Original Message-
> From: Felix Radensky [mailto:fe...@embedded-sol.com]
> Sent: Sunday, September 13, 2009 17:19 PM
> To: Zang Roy-R61911
> Cc: U-Boot-Denx; Kumar Gala
> Subject: Re: [U-Boot] [PATCH] Enable usb ehci support for
> p2020ds board
>
> Hi, R
Hi, Roy
Does this mean that USB mass storage devices are actually
usable on P2020DS ? Similar patch for MPC8536DS was
added during 2008.08 merge window, but USB mass storage
devices are not recognized by u-boot. Since I don't see any FSL
ehici driver changes, I suspect situation may be similar on
On Sep 10, 2009, at 1:44 AM, Roy Zang wrote:
> From: Roy Zang
>
> Enable usb ehci support for p2020ds board
> Signed-off-by: Roy Zang
>
> ---
> include/configs/P2020DS.h |9 +
> 1 files changed, 9 insertions(+), 0 deletions(-)
applied to 85xx.
- k
__
From: Roy Zang
Enable usb ehci support for p2020ds board
Signed-off-by: Roy Zang
---
include/configs/P2020DS.h |9 +
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 46af7b9..2a2b9ac 100644
--- a/include/conf
18 matches
Mail list logo
