Hu Mingkai-B21284 wrote:
>
>
>> I've tested another USB stick with this board, and was
>> recognized properly.
>> Also, the problematic stick works fine with Linux, so I still
>> suspect there's a problem in u-boot EHCI driver. Can you
>> test your board with smaller/older devices, the one that has
>> problems is 512MB Sandisk Cruizer Mini.
>>
>>
>
> I used the old one - SanDisk Cruzer Micro 256MB :-)
>
> But sometime, the reset command don't list the device, I had to run
> the reset command again.
>
>
This is what happens if I run usb reset twice:
=> usb reset
(Re)start USB...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... Device NOT ready
Request Sense returned 00 00 00
0 Storage Device(s) found
=> usb reset
(Re)start USB...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
Felix.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
