On Sat, Jun 13, 2020 at 8:01 PM Jagan Teki wrote:
>
> On Wed, May 27, 2020 at 6:26 PM Jagan Teki wrote:
> >
> > Enable DM_SPI for am355x baltos board.
> >
> > Build is fine, but not tested.
> >
> > Cc: Yegor Yefremov
>
> Any comments?
Reviewed-by: Yegor Yefremov
On Wed, Feb 12, 2020 at 12:44 PM wrote:
>
> From: Yegor Yefremov
>
> Signed-off-by: Yegor Yefremov
> ---
> configs/am335x_baltos_defconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig
>
DOR
> - default "vscom"
> -
> -config SYS_SOC
> - default "am33xx"
> -
> -config SYS_CONFIG_NAME
> - default "baltos"
> -
> -endif
> diff --git a/board/vscom/baltos/MAINTAINERS b/board/vscom/baltos/MAINTAINERS
> deleted fi
On Tue, Feb 14, 2017 at 11:46 AM, Yegor Yefremov
wrote:
> On Tue, Feb 14, 2017 at 7:57 AM, Stefan Roese wrote:
>> Hi Yegor,
>>
>>
>> On 13.02.2017 16:02, Yegor Yefremov wrote:
>>>
>>> On Mon, Feb 13, 2017 at 3:17 PM, Belisko Marek
>>> wrote:
On Tue, Feb 14, 2017 at 7:57 AM, Stefan Roese wrote:
> Hi Yegor,
>
>
> On 13.02.2017 16:02, Yegor Yefremov wrote:
>>
>> On Mon, Feb 13, 2017 at 3:17 PM, Belisko Marek
>> wrote:
>>>
>>> Hi Yegor,
>>>
>>> On Mon, Feb 13, 2017 at 1
On Mon, Feb 13, 2017 at 3:17 PM, Belisko Marek wrote:
> Hi Yegor,
>
> On Mon, Feb 13, 2017 at 12:57 PM, Yegor Yefremov
> wrote:
>>
>> My am335x based board doesn't detect USB sticks:
>>
>> U-Boot 2017.03-rc1 (Feb 13 2017 - 12:46:54 +0100)
>>
>
My am335x based board doesn't detect USB sticks:
U-Boot 2017.03-rc1 (Feb 13 2017 - 12:46:54 +0100)
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 256 MiB
NAND: 256 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Net:not set. Validating first E-fuse MAC
cpsw
Hit any key to
On Tue, Jan 3, 2017 at 12:02 PM, matti kaasinen
wrote:
>
> 2017-01-03 12:56 GMT+02:00 Yegor Yefremov :
>>
>> What PMIC are you using?
>
> It is TPS65217, so probe command is:
> i2c_probe(TPS65217_CHIP_PM)
I had some problems with tps65910. Anyway try to reduce I2C s
Hi Matti,
On Tue, Jan 3, 2017 at 10:26 AM, matti kaasinen
wrote:
> Hi!
>
> Would anyone have idea why spl boot fails in i2c_probe when running from
> nand but not when running from mmc card or anything at all to check?
>
> My card is am335x based board with u-boot coming from u-boot-it v2016.05.
On Fri, Dec 4, 2015 at 2:59 PM, Thomas Chou wrote:
> Hi Stephen,
>
>
> On 2015年12月04日 06:55, Stephen Warren wrote:
>>
>> The patch below appears to solve the problem. Any ideas how to fix this
>> cleanly? I don't think we want to introduce a CONFIG_SPL_xxx for every
>> CONFIG_xxx, yet CONFIG_IS_EN
... but i didn't have time yet to debug this fully.
>> > Maybe next week.
>> >
>> > let me know what happens on your board.
>> >
>> > best regards,
>> > Hannes
>> >
>> >
>> >
>> > On 12/04/2015 09:26 AM, Yego
56cf6d430d78db3a4dc08a422311145e32315 spl: mmc: add support for
> BOOT_DEVICE_MMC2
>
>
> this works for me ... but i didn't have time yet to debug this fully.
> Maybe next week.
>
> let me know what happens on your board.
>
> best regards,
> Hannes
>
>
>
&
git master fails to start u-boot.img on at least am335x_evm_defconfig
some other similar boards:
U-Boot SPL 2016.01-rc1-00373-gbe30dfb (Dec 04 2015 - 08:51:13)
Trying to boot from MMC
reading args
spl_load_image_fat_os: error reading image args, err - -1
reading u-boot.img
reading u-boot.img
Comp
On Mon, Jul 27, 2015 at 10:44 AM, Wolfgang Denk wrote:
> Dear Yegor,
>
> In message <1437979451-14060-1-git-send-email-yegorsli...@googlemail.com> you
> wrote:
>>
>> Enable DTS support (CONFIG_OF_LIBFDT), create ft_board_setup()
>> stub and select CONFIG_FIT in defconfig.
> ...
>> +int ft_board_s
Baltos has USB0 connected to a USB hub and thus is host-only. USB1
is connected to microUSB connector and thus should use OTG mode.
Signed-off-by: Yegor Yefremov
---
include/configs/baltos.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/baltos.h b
On Wed, Jul 8, 2015 at 12:54 AM, Simon Glass wrote:
> On 6 July 2015 at 09:28, Yegor Yefremov wrote:
>> Signed-off-by: Yegor Yefremov
>> ---
>> configs/am335x_baltos_defconfig | 4 ++--
>> include/configs/baltos.h| 2 --
>> 2 files changed, 2 insertion
Specify proper U-Boot offset, enable prefetch mode,
increase bootm size and add FIT fallback, if board_name
is not present in kernel-fit.itb image.
Signed-off-by: Yegor Yefremov
---
include/configs/baltos.h | 10 --
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/include
Signed-off-by: Yegor Yefremov
---
configs/am335x_baltos_defconfig | 4 ++--
include/configs/baltos.h| 2 --
2 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig
index bf73919..8e8a897 100644
--- a/configs
This action is need to make I2C communication with PMIC
stable for low temperature. Print current I2C speed in
SPL for visual control.
Signed-off-by: Yegor Yefremov
---
board/vscom/baltos/board.c | 2 ++
include/configs/baltos.h | 2 +-
2 files changed, 3 insertions(+), 1 deletion(-)
diff
On Sun, Jul 5, 2015 at 7:34 PM, Albert ARIBAUD
wrote:
> Hello Lokesh,
>
> On Thu, 2 Jul 2015 09:48:31 +0530, Lokesh Vutla
> wrote:
>> Hi Albert,
>> On Wednesday 01 July 2015 06:43 PM, Albert ARIBAUD wrote:
>> > Hello all,
>> >
>> > I get the following when building current u-boot-arm/master with
Signed-off-by: Yegor Yefremov
---
board/vscom/baltos/MAINTAINERS | 6 ++
1 file changed, 6 insertions(+)
create mode 100644 board/vscom/baltos/MAINTAINERS
diff --git a/board/vscom/baltos/MAINTAINERS b/board/vscom/baltos/MAINTAINERS
new file mode 100644
index 000..e82acfe
--- /dev/null
On Wed, Jul 1, 2015 at 3:13 PM, Albert ARIBAUD
wrote:
> Hello all,
>
> I get the following when building current u-boot-arm/master with
> current u-boot/master:
>
> * WARNING: no status info for 'am43xx_evm_ethboot'
> * WARNING: no maintainers for 'am43xx_evm_ethboot'
> WARNING: no status info f
On Thu, Jun 25, 2015 at 5:42 PM, Joe Hershberger
wrote:
> Hi Yegor,
>
> On Wed, Jun 24, 2015 at 2:33 AM, Yegor Yefremov
> wrote:
>> On Wed, Jun 24, 2015 at 8:55 AM, Yegor Yefremov
>> wrote:
>>> Hi Joe,
>>>
>>> On Wed, Jun 24, 2015
On Wed, Jun 24, 2015 at 8:55 AM, Yegor Yefremov
wrote:
> Hi Joe,
>
> On Wed, Jun 24, 2015 at 5:26 AM, Joe Hershberger
> wrote:
>> Hi Tom,
>>
>> On Tue, Jun 23, 2015 at 9:23 AM, Tom Rini wrote:
>>> On Mon, Jun 22, 2015 at 04:15:27PM -0500, Joe Hershberge
quot;CONS_INDEX=1,NAND"
>>> CONFIG_ARM=y
>>> CONFIG_TARGET_AM335X_BALTOS=y
>>
>> No, something else is wrong. board/vscom/baltos/Kconfig has CONS_INDEX
>> (like the other am335x boards and yes this needs moving to a better
>> place).
>
> Any thoug
Vision Systems's Baltos is based on AM335x SoC
from Texas Instruments. This patch adds support
such Industrial PCs in mainline u-boot.
[ ba...@ti.com: updated original patch to current u-boot ]
Signed-off-by: Yegor Yefremov
Signed-off-by: Felipe Balbi
---
Changes:
- rename board
On Wed, May 27, 2015 at 11:54 PM, Tom Rini wrote:
> On Tue, May 12, 2015 at 05:16:32PM -0500, Felipe Balbi wrote:
>
>> From: Yegor Yefremov
>>
>> Vision Systems's Baltos is based on AM335x SoC
>> from Texas Instruments. This patch adds support
>&g
Hi Joe,
On Tue, May 12, 2015 at 10:18 PM, Joe Hershberger
wrote:
> Hi Yegor,
>
> On Tue, May 12, 2015 at 1:43 AM, Yegor Yefremov
> wrote:
>> Hi Joe,
>>
>> On Mon, May 4, 2015 at 8:16 PM, Joe Hershberger
>> wrote:
>>> Hi Yegor,
>>>
>>
Hi Joe,
On Mon, May 4, 2015 at 8:16 PM, Joe Hershberger
wrote:
> Hi Yegor,
>
> On Mon, May 4, 2015 at 2:53 AM, wrote:
>> From: Yegor Yefremov
>>
>> Signed-off-by: Yegor Yefremov
>> ---
>> common/image-fit.c |4
>> 1 files changed, 4 ins
On Fri, Mar 20, 2015 at 3:54 PM, Daniel Mack wrote:
> Hi,
>
> On 03/20/2015 12:24 PM, Yegor Yefremov wrote:
>> I've also put printf() into omap_nand_read_prefetch8() just to make
>> sure it is called - it was called.
>
> Does it fall back to polled mode because the
On Fri, Mar 20, 2015 at 1:37 PM, Roger Quadros wrote:
> On 20/03/15 13:24, Yegor Yefremov wrote:
>> On Thu, Mar 19, 2015 at 4:56 PM, Daniel Mack wrote:
>>> On 03/19/2015 04:13 PM, Yegor Yefremov wrote:
>>>> Strange. Have tried with "nand read" command,
On Thu, Mar 19, 2015 at 4:56 PM, Daniel Mack wrote:
> On 03/19/2015 04:13 PM, Yegor Yefremov wrote:
>> Strange. Have tried with "nand read" command, but still the same
>> result with and without CONFIG_NAND_OMAP_GPMC_PREFETCH :
>>
>> [2.150655 0.001006] NAND
On Thu, Mar 19, 2015 at 2:56 PM, Daniel Mack wrote:
> Hi,
>
> On 03/19/2015 02:41 PM, Yegor Yefremov wrote:
>> I've got v2015.04-rc4 running on my custom am335x (600MHz) based
>> board. My 8-bit NAND chip:
>>
>> [17.297793 0.004021] omap-gpmc 5000
I've got v2015.04-rc4 running on my custom am335x (600MHz) based
board. My 8-bit NAND chip:
[17.297793 0.004021] omap-gpmc 5000.gpmc: GPMC revision 6.0
[17.303850 0.006057] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[17.309706 0.005856] nand: Micron MT29F2G08ABAEAWP
[17.312823 0.
On Mon, Oct 6, 2014 at 5:39 PM, Yegor Yefremov
wrote:
> U-Boot 2014.07
>
> I'm trying to use ping 44..47 as input. I've configured PINMUX and
> invoked request, direction etc. I always get 0 from gpio_get_value()
>
> int val;
>
> gpio_request(44,
U-Boot 2014.07
I'm trying to use ping 44..47 as input. I've configured PINMUX and
invoked request, direction etc. I always get 0 from gpio_get_value()
int val;
gpio_request(44, "dip_s1"):
gpio_request(45, "dip_s2");
gpio_request(46, "dip_s3");
gpio_request
On Thu, Jun 12, 2014 at 10:58 PM, Wolfgang Denk wrote:
> Dear Yegor Yefremov,
>
> In message
> you
> wrote:
>> AFAIK one can store MACs in a DTB from u-boot via loading DTB in RAM
>> and changing nodes values. How should this work with a FIT image? Is
>> ther
AFAIK one can store MACs in a DTB from u-boot via loading DTB in RAM
and changing nodes values. How should this work with a FIT image? Is
there any howto?
System: am335x
Yegor
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/lis
Hi Simon,
On Sat, May 24, 2014 at 3:58 AM, Simon Glass wrote:
> Hi Yegor,
>
> On 20 May 2014 20:59, Yegor Yefremov wrote:
>> I have following folder structure:
>>
>> board/kernel_fdt.its
>> output/images/zImage
>>
>> The kernel.its has follow
I have following folder structure:
board/kernel_fdt.its
output/images/zImage
The kernel.its has following path for the zImage:
data = /incbin/("output/images/zImage");
When I invoke mkimage like this, it complains, that
"output/images/zImage" doesn't exist:
mkimage -f board/kernel_fdt.its outp
Signed-off-by: Yegor Yefremov
---
Changes:
v2: use CM_CLKMODE_DPLL_SSC_EN_MASK in board file of Siemens device
arch/arm/include/asm/arch-am33xx/clock.h | 2 ++
board/siemens/rut/board.c| 2 +-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/include
On Thu, Apr 17, 2014 at 8:31 PM, Tom Rini wrote:
> On Thu, Apr 10, 2014 at 11:35:25AM +0200, yegorsli...@googlemail.com wrote:
>
>> From: Yegor Yefremov
>>
>> Signed-off-by: Yegor Yefremov
>> ---
>> arch/arm/include/asm/arch-am33xx/clock.h |2 ++
>
I've found following source code implementing SSC in kernel on TI's
forum (http://e2e.ti.com/support/arm/sitara_arm/f/791/t/198104.aspx
source file:
http://e2e.ti.com/cfs-file.ashx/__key/telligent-evolution-components-attachments/00-791-01-00-01-12-33-83/AM335x_5F00_Spread_5F00_Spectrum.c).
Now I'
On Fri, Dec 6, 2013 at 1:14 PM, Tom Rini wrote:
> On Fri, Dec 06, 2013 at 06:59:52AM -0500, Tom Rini wrote:
>> On Fri, Dec 06, 2013 at 11:47:38AM +0100, Yegor Yefremov wrote:
>> > On Fri, Dec 6, 2013 at 11:37 AM, Stefan Roese
>> > wrote:
>> > > On 06.12
On Fri, Dec 6, 2013 at 11:37 AM, Stefan Roese wrote:
> On 06.12.2013 11:17, yegorsli...@googlemail.com wrote:
>> From: Yegor Yefremov
>>
>> Pin 30 is connected to PHY's RESET# signal, so it must be
>> put to high. Otherwise PHY won't be found via MDIO
On Fri, Dec 6, 2013 at 11:08 AM, Stefan Roese wrote:
> Hi Yegor,
>
> On 06.12.2013 10:20, Yegor Yefremov wrote:
>>> This causes am3517_evm to fail with warnings:
>>>
>>> am3517evm.c: In function 'misc_init_r':
>>> am3517evm.c:106
tr' [-Wunused-variable]
> am3517evm.c: In function 'misc_init_r':
> am3517evm.c:106:6: warning: unused variable 'reset' [-Wunused-variable]
> am3517evm.c:105:24: warning: unused variable 'ctr' [-Wunused-variable]
>
> These are trivial, but I'd like th
On Fri, Dec 6, 2013 at 8:28 AM, Yegor Yefremov
wrote:
> On Thu, Dec 5, 2013 at 6:28 PM, Måns Rullgård wrote:
>> Yegor Yefremov writes:
>>
>>> On Thu, Nov 28, 2013 at 5:57 PM, Tom Rini wrote:
>>>> On Thu, Nov 28, 2013 at 05:39:09PM +0100, Yegor Yefremov w
On Thu, Dec 5, 2013 at 6:28 PM, Måns Rullgård wrote:
> Yegor Yefremov writes:
>
>> On Thu, Nov 28, 2013 at 5:57 PM, Tom Rini wrote:
>>> On Thu, Nov 28, 2013 at 05:39:09PM +0100, Yegor Yefremov wrote:
>>>
>>>> I'm having problems with the new u-b
On Thu, Nov 28, 2013 at 5:57 PM, Tom Rini wrote:
> On Thu, Nov 28, 2013 at 05:39:09PM +0100, Yegor Yefremov wrote:
>
>> I'm having problems with the new u-boot (November 2013) and am3517
>> SoC. When I start Debian 7.0 armhf I get lots of Segmentation faults,
>>
I'm having problems with the new u-boot (November 2013) and am3517
SoC. When I start Debian 7.0 armhf I get lots of Segmentation faults,
I can't even perform apt-get udpate. With the older u-boot (arago
sources from 2010) everything seems to work properly.
I've checked ATAG_MEM and both u-boot ver
I'm testing a board, that is quite similar with am3517evm. In Linux I
just want to use one ECC layout for all images (MLO. u-boot.img,
uImage, rootfs). It seems the only choice is
OMAP_ECC_HAMMING_CODE_HW_ROMCODE. My flash chip has page size of 2048
+ 64 bytes and 128K erase pages. It would corresp
On Wed, Nov 28, 2012 at 11:15 AM, wrote:
> From: Yegor Yefremov
>
> Signed-off-by: Yegor Yefremov
> ---
> drivers/net/phy/phy.c |2 +-
> include/phy.h |1 +
> 2 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/net/phy/ph
On Wed, Dec 19, 2012 at 3:07 PM, Pavan wrote:
> Hi,
>
>i need to configure u-boot-2013.01.rc2 for my custom board, that
> is completely based on beaglebone Rev A3,i have mux.h file according to my
> hardware i am not understanding the codeflow of beaglebone for include the
> mux.h.
>
>
On Tue, Dec 4, 2012 at 1:04 PM, Manukumar wrote:
> Dear All,
>
> How to access u-boot environment variables from kernel space or user
> space in P1012 processor.
>
> The variables required to be accessed from uboot environment section
> are:
>
> eth1addr
You can get the MAC address from related r
On Thu, Nov 29, 2012 at 3:51 PM, Marek Vasut wrote:
> Dear Yegor Yefremov,
>
>> On Thu, Nov 29, 2012 at 3:29 PM, Marek Vasut wrote:
>> > Dear Yegor Yefremov,
>> >
>> >> On Thu, Nov 29, 2012 at 1:55 PM, Marek Vasut wrote:
>> >> > Dear Yego
On Thu, Nov 29, 2012 at 3:29 PM, Marek Vasut wrote:
> Dear Yegor Yefremov,
>
>> On Thu, Nov 29, 2012 at 1:55 PM, Marek Vasut wrote:
>> > Dear Yegor Yefremov,
>> >
>> >> On Thu, Nov 29, 2012 at 8:53 AM, Henrik Nordström
>> >>
>> >&
On Thu, Nov 29, 2012 at 1:55 PM, Marek Vasut wrote:
> Dear Yegor Yefremov,
>
>> On Thu, Nov 29, 2012 at 8:53 AM, Henrik Nordström
>>
>> wrote:
>> > tor 2012-11-29 klockan 07:27 +0100 skrev Marek Vasut:
>> >> Dear yegorsli...@googlemail.com,
>> &
On Thu, Nov 29, 2012 at 8:53 AM, Henrik Nordström
wrote:
> tor 2012-11-29 klockan 07:27 +0100 skrev Marek Vasut:
>> Dear yegorsli...@googlemail.com,
>>
>> > From: Yegor Yefremov
>> >
>> > The driver code was taken from Linux kernel source:
>> &g
On Thu, Nov 29, 2012 at 7:27 AM, Marek Vasut wrote:
> Dear yegorsli...@googlemail.com,
>
>> From: Yegor Yefremov
>>
>> The driver code was taken from Linux kernel source:
>> drivers/net/phy/icplus.c
>>
>> Signed-off-by: Yegor Yefremov
> [...]
>
&g
On Tue, Nov 27, 2012 at 7:55 AM, Yegor Yefremov
wrote:
> On Tue, Nov 27, 2012 at 3:57 AM, Marek Vasut wrote:
>> Dear Yegor Yefremov,
>>
>>> I'm porting a phy driver from Linux to u-boot and was able to use
>>> genphy_parse_link() without
On Tue, Nov 27, 2012 at 3:57 AM, Marek Vasut wrote:
> Dear Yegor Yefremov,
>
>> I'm porting a phy driver from Linux to u-boot and was able to use
>> genphy_parse_link() without a problem. As mentioned in comment to
>> genphy_parse_link(), the routine itself was taken
there any issues?
Regards,
Yegor
>From c20576e3ddbf92e68837238a2aef9c6c83c6fea2 Mon Sep 17 00:00:00 2001
From: Yegor Yefremov
Date: Mon, 26 Nov 2012 15:25:55 +0100
Subject: [PATCH] phy: export genphy_parse_link()
Signed-off-by: Yegor Yefremov
---
drivers/net/phy/phy.c |2 +-
include/phy.h
Am 18.07.2011 15:51, schrieb Yegor Yefremov:
> From 53afd3a38abbaed8890ca1ba36439e0c93b69969 Mon Sep 17 00:00:00 2001
> From: Yegor Yefremov
> Date: Mon, 18 Jul 2011 15:44:42 +0200
> Subject: [PATCH] am3517evm: remove rootfstype kernel parameter for MMC boot
> device
>
> i
>From 53afd3a38abbaed8890ca1ba36439e0c93b69969 Mon Sep 17 00:00:00 2001
From: Yegor Yefremov
Date: Mon, 18 Jul 2011 15:44:42 +0200
Subject: [PATCH] am3517evm: remove rootfstype kernel parameter for MMC boot
device
it is not necessary to define rootfstype for mass storage devices.
Kernel dete
Am 18.07.2011 11:41, schrieb Albert ARIBAUD:
> Le 18/07/2011 10:48, Yegor Yefremov a écrit :
>>> From 74f884f3d76feda60d8fa1dff1f3fef8bd89acb1 Mon Sep 17 00:00:00 2001
>> From: Yegor Yefremov
>> Date: Mon, 18 Jul 2011 10:37:35 +0200
>> Subject: [PATCH] am3517evm: ch
>From 74f884f3d76feda60d8fa1dff1f3fef8bd89acb1 Mon Sep 17 00:00:00 2001
From: Yegor Yefremov
Date: Mon, 18 Jul 2011 10:37:35 +0200
Subject: [PATCH] am3517evm: change console device from ttyS2 to ttyO2
the serial device names have been changed from ttySx to ttyOx, so the
console device n
Hi Albert,
>>>> the serial device names have been changed from ttySx to ttyOx, so the
>>>> console device name
>>>> should be also changed to support the latest kernel versions.
>>>>
>>>> Signed-off-by: Yegor Yefremov
>>>&
Hi Albert,
>> the serial device names have been changed from ttySx to ttyOx, so the
>> console device name
>> should be also changed to support the latest kernel versions.
>>
>> Signed-off-by: Yegor Yefremov
>>
>> ---
>
> This does not apply cle
the serial device names have been changed from ttySx to ttyOx, so the
console device name
should be also changed to support the latest kernel versions.
Signed-off-by: Yegor Yefremov
---
include/configs/am3517_evm.h |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: b/include
70 matches
Mail list logo
